SOLIGHT 5B322 Outdoor Built In Floor Socket Instruction Manual
- June 11, 2024
- Solight
Table of Contents
SOLIGHT 5B322 Outdoor Built-In Floor Socket
Product Information
Specifications:
- Model Numbers: 5B320, 5B322, 5B324
- Product Type: Assembly Equipment
- Color: Varies
- Material: Steel
- Dimensions: Varies per model
- Weight: Varies per model
Product Usage Instructions
1. Unboxing and Checking Parts:
Upon receiving the product, carefully unbox it and check that all parts listed in the manual are included.
2. Assembly:
Follow the step-by-step assembly instructions provided in the manual. Ensure to tighten all screws securely.
3. Safety Precautions:
Before using the equipment, make sure to read and understand all safety warnings mentioned in the manual. Always wear appropriate protective gear.
4. Operation:
Operate the equipment according to the guidelines provided. Do\ not exceed the maximum weight capacity specified for the product.
5. Maintenance:
Regularly inspect the equipment for any signs of wear or damage. Clean and lubricate moving parts as recommended in the manual.
Frequently Asked Questions
- Q: What should I do if a part is missing from the package?
- A: Contact our customer support immediately with your order details, and we will assist you in obtaining the missing part.
- Q: Can this equipment be used outdoors?
- A: It is recommended to use the equipment indoors to prevent damage from weather conditions.
- Q: How often should I perform maintenance on the equipment?
- A: Regular maintenance should be performed every 3-6 months, depending on the frequency of use. Refer to the manual for specific maintenance instructions.
Instruction for assembly
Thank you for purchasing our product. Please read this manual carefully and heed the safety warnings and instructions before installing, using or repairing the equipment. This will ensure not only the protection of persons, but also the long life of the equipment.
- Bring the installation box with a power cable to the desired place first.
- Disconnect mains from the power before the installation.
- Strip isolation max. 12mm ± 1mm from the end of each conductor.
- The maximum diameter of a conductor without isolation is 2mm.
- Insert L and N conductors correctly regardless of molded marks on cable inlets on the socket body.
- Make sure of inserted conductors are safely secured with the cable knobs.
- Attach the socket to the installation box with screws, and tighten it well.
- Installation must be carried by an authorized person only
Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>