TESLONG NTS500B Household Inspection Camera User Guide
- June 16, 2024
- TESLONG
Table of Contents
**TESLONG NTS500B Household Inspection Camera User Guide
**
Product manual
The NTS500B is a high performance industrial endoscope with a 5.0-inch highdef
nition color IPS. It is ergonomically designed so that the main functional
buttons can be controlled with one hand. The Snapshot and recording functions
are sup ported, photos and videos can be saved on TF memory card (Micro-SD
card). This product integrates high-brightness illumination, backlight on
buttons and auxiliary LED lights for camera probe, so that the product can be
used normally and even i dark environments. The built-in 3500mAh rechargeable
lithium battery allows 4 hour of continuous operation.
The camera tipped probe is interchangeable, it can connect to different probes
with different lengths, diameters, view angels and focal lengths for different
uses.
Warning: This product is an industrial endoscope camera and is not intended fo medical use or human examination.
Safety and maintenance
- Please do not violently hit the camera probe, and do not imprudently pull the cable.
- When the product is used in the environment with sharp staff, please be careful to prevent the probe’s waterproof protective layer from being scratched during usage.
- The camera probe adopts materials which are not resistant to high temperature. When checking the vehicle engine, please ensure that temperature inside the engine drops to the normal temperature.
- When the product is not in use, Please keep Probe and NTS500B clean and dry away from oil or other corrosive dangerous materials.
- This product is not suitable for people with limited physical, sensory or mental capa- bilities to use it.
- Please do not allow children to touch or operate this device.
- If the device is damaged, do not disassemble it by yourself. Please contact the seller or the agent where you bought it to get repair service.
Battery description
- Please use 5V household charger that meets the safety regulations to charge this device.
- This device can work while charging.
- If you do not use the device for a long time, please ensure that it is charged at least onc every 3 months to prevent irreparable damage caused by excessive battery discharge.
Functions
-
Camera probe connector
-
Light control button: To adjust the the LED’s brightness of the camera.
-
Snap button: Photo taking/Start video recording/End video recording.
-
Enter button: Confirm selection/freeze screen
-
Up and down selection button
-
Mode switch button: switch between three function modes: Photo taking, video recording and playback.
-
Settings button: enter/exit settings menu
-
Power button: long press to turn on/off
-
Auxiliary light switch
-
Charging port
-
TF card slot
-
Auxiliary lighting
-
Speaker
-
Microphone
-
Reset button
-
Screw fixing hole
-
Fixing bracket hole
Instructions
Long press the power button to turn on/ off device.
The device is equipped with a TF memory card(inserted). Gently pres eject the card.
Insert the hose connector into the host interface, align it with the screw hole, and then tighten the screw to fix it.
Note: Connect camera probe before turning on device. Restart device after replacing camera probe.
Insert TF card:
- Please power off device before insert TF card.
- Please make sure the direction and the front and back sides is correct when insert the TF card.
- Do not use excessive force when inserting or removing the TF card to prevent damages of card slot structure.
Language settings
The default language is English, and the system supports English, Chinese, Germa French, Spanish, Italian, Russian, and Japanese.
Setting path:
Press the button twice to enter setting page.
Select second item (Language) on settings page.
Press up and down keys to select the language you need.
Press to save your choice.
Photo taking/Video recording/Playback
Press to switch to the photo taking or video recording mode, and press take a photo or start recording.
Press to switch to playback mode, to select photo or video to and press to delete photo or vied.
Copy photo and video files to computer
You can use a TF card reader to copy data directly or use a USB cable to
connect computer for copying.
Please pull out probe camera first before using USB cable.
Specification parameters
| Model | NTS500B |
|---|---|
| Screen | 5.0-inch color IPS |
| Screen resoluti-on (Pixels) | 854 x 480 |
| Snapshot resolution (Pixels) Video Recording resolution (Pixels) | 1920 x 1080 |
| Port | Type-C charging port, TF memory card slot |
| Diameter | Optional |
| Cable Length | Optional |
| Resolution | 1.0 Megapixel HD |
| Viewing Angle | 70 |
| Depth of Field | 0.79-4.0 inch (20mm-100mm) |
| Light Source | 6 adjustable high-intensity LEDs |
| Waterproof | IP67 |
| LED flashlight | The device integrates 4 high-brightness LED lights |
| Battery | 3500mAh rechargeable lithium battery |
| Operating | 32°F~113°F (0°C~45°C) |
| Temperature | 3-4 hours (if USB 5V 1A charger) |
| Charging time | 2-4 hours |
| Battery life | KC CE FCC RoHS |
| Certificate | English, Chinese, German, French, Spanish, Italian, Russian, |
Japanese
Packaging| Device, camera tipped probe, Type-C charging cable, user manual,
portable toolbox
Customer Service
Please contact us if you have any product quality problems, we would love to hear from you.
12-month Limited Warranty
Lifetime Technical Support
[email protected]
[email protected]
1-877-899-8809 (US)
(Mon-Fri 8:00 AM-5:00PM PST)
TESLONG NTS300 B0916 V4.1 3.06.04.000209
Symbols
Documents / Resources
|
TESLONG NTS500B Household Inspection
Camera
[pdf] User Guide
NTS500B Household Inspection Camera, NTS500B, Household Inspection Camera,
Inspection Camera, Camera
---|---