ETHAN ALLEN 09-7220B Lattice Glass Table Lamp Instruction Manual
- June 12, 2024
- ETHAN ALLEN
Table of Contents
ETHAN ALLEN 09-7220B Lattice Glass Table Lamp
Model : 09-7220B
Product Information
- No tools required for assembly
- Light bulb is not included
- Parts Included:
- Harp (styles may vary)
- Saddle
- Shade (may be packed in separate carton)
- Finial
- Socket (attached, no assembly required)
- Plug Cap
Assembly Instructions:
- Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of packaging materials.
- Insert Harp (A) into Saddle (B).
- Install Shade (C) onto Harp (A).
- Screw Finial (D) onto Harp (A).
- Install lightbulb into Socket Saddle (E).
- Remove Plug Cap (F) from plug.
Care and Cleaning:
- Wipe with a soft dry cloth.
- Avoid cleaners, scouring pads, etc.
- Before changing bulb, unplug lamp and allow bulb to cool.
Troubleshooting:
| Problem | Possible Cause | What to Do |
|---|---|---|
| Bulb does not light | Bulb is burnt out or damaged | Replace bulb |
| Bulb does not light | Power to lamp is off | Confirm power is on |
| Bulb does not light | Lamp is not plugged in | Confirm lamp is plugged in |
If the lighting fixture still does not work after troubleshooting, please contact your local Ethan Allen Design Center.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY: This
lighting fixture is for indoor use only. This lamp is equipped with a
polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug
or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only
the type of bulb specified. Keep flammable materials away from bulb. DO NOT
OPEN the product or alter the wiring in any manner. Extension cord: Follow
precautions provided with power cord.
Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of
packaging materials.
ASSEMBLY, CARE, AND TROUBLESHOOTING
No tools are required for assembly. Light bulb is not included.
Parts Included (refer to figure):
- A. Harp (styles may vary)
- B. Saddle
- C. Shade (may be packed in separate carton)
- D. Finial
- E. Socket (attached, no assembly required)
- F. Plug Cap
Assembly Procedure (refer to figure):
- Insert Harp (A) into Saddle ( B).
- Install Shade (C) onto Harp (A).
- Screw Finial (D) onto Harp (A).
- Install lightbulb into Socket Saddle (E).
- Remove Plug Cap (F) from plug.
Care and Cleaning
- Wipe with a soft dry cloth.
- AVOID cleaners, scouring pads, etc.
- Before changing bulb, unplug lamp and allow bulb to cool.
TROUBLESHOOTING
| Problem: | Possible Cause: | What to Do: |
|---|---|---|
| Bulb does not light | Bulb is burnt out or damaged | Replace bulb |
| Power to lamp is off | Confirm power is on | |
| Lamp is not plugged in | Confirm lamp is plugged in |
After troubleshooting, if the lighting fixture still does not work, contact your local Ethan Allen Design Center.
SAVE THESE INSTRUCTIONS
©2018 Ethan Allen Global, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>