Godox MoveLink Mini 2.4GHz Wireless Microphone System Instruction Manual

Godox MoveLink Mini 2.4GHz Wireless Microphone System

Foreword

Thank you for purchasing!
Movielink Mini is the new microphone system that transmits audio using 2.4GHz wireless frequency, with the characteristics of compact and portable, long battery life, and compatibility with various devices by different adapters. Kits include one transmitter and one receiver, as well as kits include two transmitters and one receiver available for you choice. It’s suitable for live streaming, interview, lecturing, video recording, etc. Please read this manual carefully before using to make sure the correct operation and exert the optimum function.

Main Feature

•  Globally universal 2.4GHz wireless frequency, which can be used in WIFI and Bluetooth simultaneously.
•  The maximum barrier-free transmission distance up to 1 00m(tested in the barrier-free outdoor environment according to FCC standards).
•  Transmitter upgrades denoise function.
•  Output volume adjustment and silent function available.
•  Convenient matching and stable transmitting and receiving.
•  Compatible with various devices by Type-C or Lightning adapters.
•  The attached charging case provides both charging and storage functions.

Warning

•  This product is a high-precision instrument, please avoid falling, collisions or pounding.
•  Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center.
•  Always keep this product dry. Do not use in rain or damp conditions.
•  Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty.
•  Keep out of reach of children.
• Do not use in flammable and explosive environments. Pay attention to the relevant warning signs.
• Do not leave or store the product if the ambient temperature reads over 50°C.
• Please read carefully and follow the warnings or instructions provided by the manufacturer.

Structure of Product

Transmitter(MoveLink Mini TX)

1. Power Switch / Mute / Denoise Button
2.  Indication Lamp
3.  Built-in Microphone
4.  Charging Points
5.  Back Clip

Receiver(MoveLink Mini RX)

1.  Power Switch/Gain Control Button
2.  Indication Lamp
3.  Adapter Port
4.  Charging Points

Charging Case(ML-C2) (for Kit2)

1. Pairing Button
   Receiver’s Slot

2.  Transmitter’s Slot

3.  Adapter’s Slot

4.  Wind Cap’s Slot

5.  Indication Lamp

6.  Type-C Charging Port

7.  Pin Hole

Charging Case (for Kit1)

1.  Pairing Button
2.  Receiver’s Slot
3.  Transmitter’s Slot
4.  Adapter’s Slot
5.  Wind Cap’s Slot
6.  Indication Lamp
7.  Type-C Charging Port
8.  Pin Hole

What’s in the Box

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.

Buttons Instruction

1. Power Switch/Mute/Denoise Button on Transmitter Long press for 3 seconds to turn on the device, the indication lamp will be constant on yellow in unpaired status and blue in paired status. Short press to enter mute mode, the indication lamp will be constant on red. Short press twice quickly to enter denoise mode (the indication lamp will flash purple twice)/exit denoise mode (the indication lamp will flash green twice), the denoise mode is off by default after powered on.
2. Power Switch/Gain Control Button on Receiver Long press for 3 seconds to turn on the device, the indication lamp will be constant on yellow in unpaired status and blue in paired status. Short press to adjust the output volume, the indication lamp will flash green every 0.5 seconds in level 1 (- 33dB), and purple every 0.5 second in level 2 (-43dB).
3. Pairing Button on Charging Case Short press to pair, the transmitter and receiver will flash green quickly. The receiver will exit pairing status if successfully paired with two transmitters in Kit2, otherwise, it will exit pairing status after 1 Os ..
4.  Long Press to Reset If the transmitter or receiver cannot be turned on due to long-term idle use or other reasons, put them into the charging case, take out after the devices have been charged, then press and hold the power switch button for 10 seconds to reset.

Indication Lamps Instruction Transmitter

1.  The indication lamp will be constant on yellow when the transmitter is powered on but unpaired, then turn to constant on blue after paired. When the battery level is lower than 10%, the indication lamp will flash red.
2.  The indication lamp will be constant on red in mute mode.
3.  Enter denoise mode: the indication lamp will flash purple twice. Exit denoise mode: the indication lamp will flash green twice.
4.  Charging in the case: The indication lamp will not lighten on when in malfunctions or poor contact. It will breathe in blue when charging normally with the case open, and be constant on blue (paired) or yellow (unpaired) after fully charged. While it will breathe in blue when charging normally with the case closed, and off after fully charged.
5. Pairing in the case: The indication lamp will flash green quickly in pairing, exit pairing status if failed and then be constant on yellow, while automatically turn to charging mode if paired successfully.

Receiver

1. The indication lamp will be constant on yellow when the receiver is powered on but unpaired, then turn to constant on blue after paired. When the battery level is lower than 10%, the indication lamp will flash red.
2.  Gain control: The indication lamp will flash purple every 0.5 seconds when in level 1, and green every 0.5 seconds when in level 2.
3.  Charging in the case: The indication lamp will not lighten on when in malfunctions or poor contact. It will breathe in blue when charging normally with the case open, and be constant on blue (paired) or yellow (unpaired) after fully charged. While it will breathe in blue when charging normally with the case closed, and off after fully charged.
4.  Pairing in the case: The indication lamp will flash green quickly in pairing, exit pairing status if failed and then be constant on yellow, while automatically turn to charge mode if paired successfully.

Note

1. When the transmitter is within the receiving range of the receiver, the indication lamp will be constant on blue. When the transmitter is beyond the receiving range, the indication lamp will be constant on yellow, and automatically turn to constant on blue after back to the receiving distance.
2.  The transmitter and receiver will automatically enter into charging mode when put into the charging case. They will automatically shut down after fully charged when the case is closed, then automatically boot up when the case is opened.

Charging Case

1.  Charging: The indicator lamp will breathe in white when in charging mode, and turn to constant on white after fully charged.
2.  Discharging: When the receiver and transmitter are put into the charging case respectively or at the same time, short press the pairing button to trigger charging if the devices are fully charged. The indication lamp will be constant on white when the transmitter and receiver are not fully charged while off after fully charged. It will flash white when the battery level is lower than 10%.

Operating Instruction

Pairing
Put the transmitter and receiver into the charging case and press the pairing button, the receiver and transmitter will flash green quickly, and turn to be constant on blue after successfully paired (breathe in blue if not successfully). Or turn on the transmitter and receiver manually, they will automatically start pairing within the receiving range, the indicator light will be constant on blue after successfully paired.seconds and then off, then the devices is in charging mode.

Installation
Install the transmitter on the collar through the back clip, a1m1ng the built- in microphone towards the sound source direction. Please do not cover the built-in microphone in order to get good sound effects. Choose the suitable adapter and insert into the adapter port, and then connect to the corresponding device to use.

Technical Data

Max.Barrier-free Transmission

Distance

| 100 meters (tested in barrier-free outdoor environment

according to FCC standard)

Working Temperature Range| -10~50°C
Input Parameters| Built-in Ii-ion battery

3.7V, 100mAh, 0.37Wh

| Built-in Ii-ion battery

3.7V, 150mAh, 0.555Wh

Dimension| 53mm21 mm17mm| 61mm21mm15mm
Net Weight| 12g| 14g
Product Name| Charging Case
---|---
Model| ML-C2| I
Input Parameters| Built-in Ii-ion battery 3.7V, 1370mAh, 5.069Wh/

Type-C 1A/5V

| Built-in Ii-ion battery 3.7V, 800mAh, 2.96Wh/

Type-C 500mA/5V

Dimension| 163mm65mm32m| 139mm57mm28m
Net Weight| 180g| 115g

Changes made to the specifications or designs may not be reflected in this manual.

Maintenance

Avoid falling. Strong collision or vibration may malfunction the device. Keep dry. This product is not water-proof. Malfunctions, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity. Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand. Keep away from a strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction. Specifications and data may be subject to changes without notice.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2.  this device must accept any interference received, including interference that may cause undesired operation
   Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
   Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

   •  Reorient or relocate the receiving antenna.
   •  Increase the separation between the equipment and the receiver.
   •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   •  Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Warning
Operating frequency:2402MHz – 2480MHz Maximum EIRP Power: 5dBm

Declaration of Conformity
GODOX Photo Equipment Co., Ltd. hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web Ii n k: https://www.godox.com/DOC/God ox_M novel n k_M in i_DOC. pdfThe device complies with RF specifications when the device is used at 0mm from your body.

IC Warning
This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:

1.  This device may not cause interference; and
2.  This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>