UBIQUITI UDM-SE Dream Machine SE Instructions
- June 5, 2024
- UBIQUITI
Table of Contents
Dream Machine SE
Scan here to get started
https://ui.com/quick-start/udm-se
Safety Notices (if appliable)
- Read, follow, and keep these instructions.
- Heed all warnings.
- Only use attachments/accessories specified by the manufacturer.
WARNING: Failure to provide proper ventilation may cause a fire hazard.
Keep at least 20 mm of clearance next to the ventilation holes for adequate
airflow.
WARNING: To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
WARNING: Do not use this product in a location that can be submerged in
water.
WARNING: Avoid using this product during an electrical storm. There may
be a remote risk of electric shock from lightning.
WARNING: Use only IEC/EN 60825-1:2014 Class I SFP Modules, and for safety
ensure not to look directly into fiber cable ends.
WARNING: To maintain safety and ensure fire safety, hard drive trays with
or without hard drives, must be installed at all times.
Battery Warning (if appliable)
- Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
- Purchase the battery recommended by the manufacturer. Risk of explosion if replaced with an incorrect type.
Electrical Safety Information (if appliable)
- Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
- There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
- This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
d. Protective earthing is provided by a Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
A pparatets stikprop skal tilsluttes en stikkontakt med ford som giver forbindelse til stikproppensjord.
Apparatet mi tilkoples jordet stikkontakt
Radiation Exposure Statement
- This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
| Operating Frequency (MHz): | 2400 – 2483,5 |
|---|---|
| Max. RF Output Power: | ≤ 20 dBm |
Declaration of Conformity
Hereby, UBIQUITI, declares that this device, UDM-SE, is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU, 2014/30/EU, 2014/35/EU. The full text of the EU declaration of conformity and detailed compliance information is available at the following internet address: ui.com/compliance
Ubiquiti Networks (Czech Republic) s.r.o.
Plzenska 345/5, Praha – Smichov,
Czech Republic 150 00