TOYYKANG 2023 TV Antenna for Smart TV Instructions
- June 16, 2024
- TOYYKANG
Table of Contents
TOYYKANG 2023 TV Antenna for Smart TV
Product Usage Instructions
Specifications
- Innovative three-dimensional antenna design
- High gain and low error rate digital TV signal reception
- Multi-directional design pulls in signals from all directions
- Fast and easy setup
- Can be placed on a table or next to a window for optimal reception
Step 1: Connect the Antenna
- Connect the end of the attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box.
- Plug the USB plug into the USB port of the TV or Digital Converter Box.
Step 2: Position the Antenna
- Hold the antenna near the window and place it horizontally or vertically.
Step 3: Set the Tuner Mode
- In the TV’s or STB’s setup menu, set the tuner mode to “Antenna” or “Air.”
- For more detailed instructions, please refer to your TV manual.
Step 4: Scan for Channels
- In the TV’s or STB’s setup menu, set TV to “Scan” for channels.
- This may be listed as “auto-program,” “auto-scan,” “channel search,” or “channel scan.” Consult the TV manual for detailed instructions.
Step 5: Optimize Reception
- If reception is sporadic, try moving the antenna to another location and rescanning the TV until the optimal position is found.
Reception Signal
- To enhance the image, place the antenna near the window where there is no movement of cars and people.
- Ensure that the antenna is facing the correct direction.
Tips for Best Reception
- This digital HDTV antenna is intended for indoor use only.
- Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna.
- Keep the antenna away from any sources of interference such as air conditioners, elevators, hairdryers, and microwave ovens.
- Check your TV manual to ensure it comes with a built-in tuner for free view if you use a flat HDTV.
- Make sure you are using an HD receiver to pick up HD channels.
- Retune your free view TVs and digital receiver from time to time to ensure you are receiving all available services.
- TV reception capacity depends on the distance between your home, transmitting tower, and surrounding environments.
- For maintenance of the antenna, use a soft cloth with a mild detergent to clean its shell.
Frequently Asked Questions
- Q: Can I use this antenna outdoors?
- A: No, this digital indoor TV antenna is intended for indoor use only.
- Q: How should I position the antenna for the best reception?
- A: It is recommended to place the antenna near a window and away from any sources of interference. Experiment with different positions to find the optimal reception.
- Q: Do I need to rescan every time I move the antenna?
- A: Yes, whenever you move the antenna to a new location, you should rescan the TV to ensure optimal reception.
- Q: Can I pick up HD channels without an HD receiver?
- A: No, you need to use an HD receiver to pick up HD channels. Make sure to consult your receiver manual for more information.
- Q: How often should I retune my free view TVs and digital receiver?
- A: It is recommended to retune your free view TVs and digital receiver from time to time to ensure you are receiving all available services. This process takes only a few minutes and can be done with your remote control.
Features
DIGITAL INDOOR TV ANTENNA
- Innovative three-dimensional antenna design.
- It has high gain and low error rate digital tv signal reception, and a significant signal.
- Enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images.
- Multi-directional design pulls in signals from all directions.
- Fast and easy to set up -Unwrap,plug it in and Scan channels.
- You can put it on the table or next to the window (strongly recommended), then this will give you many opportunities to watch clear digital and high-definition programs.
Set up Guide
- Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converter Box.
- Step2: Hold the antenna, near the window, place it horizontally or vertically.
- Step3: In the TV’ s or STB ’ s setup menu, set the tuner mode to “ Antenna ” or “ Air ” for more detailed instructions, please refer to your TV manual.
- Step4: In the TV’ s or STB ’ s setup menu, set TV to “ scan ” for channels. this can sometimes be listed as auto-program,auto-scan,channel search or channel scan. consult the TV manual or detailed instructions.
- Step5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found.
RECEPTION SIGNAL
- Put the antenna near the window to enhance the image.
- Rather than where there is no movement of cars and people.
Note: for the best reception, please check the following tips.
- This digital hdtv antenna is intended for indoor use only.
- Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna.
- Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner, elevator, hairdryer and microwave oven…etc.
- Make sure you are using a HD receiver; otherwise no HD channels can be picked up. please read receiver manual.
- If you use a flat HDTV, please go through your tv manual to make sure your TV comes with built-in tuner for free view.
- You need to retune your free view TVs and digital receiver from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control.
- TV reception capacity depends on the distance among your home, transmitting tower and surrounding environments.
- For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell.
Keep distance from some devices that use a lot of strength.
Read User Manual Online (PDF format)
Loading......