PowerA B0753BMWMB Car Charger for the Nintendo Switch User Manual

: June 5, 2024
: PowerA

Table of Contents

TROUBLESHOOTING
FCC STATEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CAR CHARGER
for the Nintendo Switch™
and Nintendo Switch™ Lite

USER MANUAL

CAR CHARGER
The Car Charger for the Nintendo® Switch charges the Nintendo Switch Console uses the power outlet in a car.
CHARGING YOUR NINTENDO SWITCH

Connect one end of the USB Type-C cable to your Nintendo Switch Console.
Connect the Car Charger power plug to the car’s power outlet.

TROUBLESHOOTING

Q1: Why isn’t my Nintendo Switch charging?
A1: For the Car Charger to function properly, it must be fully inserted into the power outlet and in full contact with the anode and cathode connectors. In some cars, the ignition must be turned on before power becomes available.
A2: Make sure that the USB cable is fully inserted into the Nintendo Switch Console.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
3. this device may not cause harmful interference, and
4. this device must accept any interference received, including interference that may cause undesired operation
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference;
This device must accept any interference, including interference that may cause undesired operation of the device

MANUFACTURED BY
ACCO Brands USA LLC
4 Corporate Way, Lake Zurich, IL 60047
ACCOBRANDS.com | POWERA.com | MADE IN CHINA
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit PowerA.com/Support.
WARRANTY
2-Year Limited Warranty: Visit PowerA.com/support for details.

AUSTRALIAN WARRANTY STATEMENT
This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes with a one-year warranty from the date of purchase. Defects in the product must have appeared within one year from the date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures. Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer.

AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street
South Yarra, Australia VIC 3141
bluemouth.com.au
Email: support@bluemouth.com.au
+61 (3) 9867 2666

ADDITIONAL LEGAL
© 2021 ACCO Brands USA LLC. PowerA and PowerA
Logos are trademarks of ACCO Brands Corporation.
Nintendo Switch is a trademark of Nintendo.
Licensed by Nintendo. All rights reserved. All other trademarks are the property of their respective owners.

REGIONAL COMPLIANCE SYMBOLS
More information is available via web-search of each symbol name.

The WEEE (Waste of electrical and electronic equipment) symbol requires battery disposal outside of other household waste per local regulations. Contact your city office, waste disposal service, or retailer for guidance.

The CE mark is a declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection.

The UKCA (UK Conformity Assessment) mark is a declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.

The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).

TWO YEAR LIMITED WARRANTY
For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.
DECLARATION OF CONFORMITY
Hereby, ACCO Brands USA LLC at 4 Corporate Way, Lake Zurich, IL 60047 USA, declares that this wired charger is in compliance with Directive 2014/30/ EU. The full text of the EU Declaration of Conformity is available at the following internet address: PowerA.com/compliance

PowerA.com/Support