PowerA B0B7P3D7FG Nano Enhanced Wired Controller User Manual

PowerA B0B7P3D7FG Nano Enhanced Wired Controller

PRODUCT OVERVIEW

CONTENTS

• PowerA Nano Enhanced Wired Controller for Xbox
• Detachable 10ft USB Cable
• User Manual

SET UP

1. If your Xbox is off, connect the USB cable between an available USB port on your console and the USB-C port on your controller. Press the Xbox Button on the controller until the console powers on. The small white LED will illuminate to indicate a successful connection.
2. If your Xbox console is already on, simply connect the USB cable into any available USB port on the console and connect the USB-C to your controller.
   The small white LED light should illuminate, indicating a successful connection.

NOTE: For player and controller assignment, reference your official Xbox users manual.

ASSIGNING THE ADVANCED GAMING BUTTONS

1. Press the Program Button on the back of the controller for 2-3 seconds. The LED Connection Indicator will flash, signaling the controller is in Assign Mode.
2. Press one of the following buttons (A /B/X / Y/LB/RB/LT/RT/Left Stick Press/Right Stick Press/D-pad) to re-assign. Then press the Advanced Gaming Button (AGR or AGL) that you wish to assign. The LED connection indicator will stop flashing, signaling the Advanced Gaming Button has been set.
3. Repeat for the remaining Advanced Gaming Button.

NOTE: Advanced Gaming Button assignments will remain in memory even after disconnected.

RESETTING THE ADVANCED GAMING BUTTONS

1. Hold the Program Button down for 2 seconds. The LED Connection Indicator will slowly flash, signaling the controller is in Assign Mode.
2. Press the previously assigned button, and the function will be cleared.

USING THE SHARE BUTTON

Refer to Xbox documentation for details on functions and features related to the Share Button.

TROUBLESHOOTING

For current FAQs, visit PowerA.com/support.

Q: Controller will not connect to Xbox console?

• A: Confirm your Xbox console is powered “ON”.
• A: Confirm your TV is set to the proper video input and that you can see the Xbox console interface on your TV screen.
• A: Confirm cable is properly connected to your Xbox console.
• A: Confirm cable is properly connected to your PowerA Nano Enhanced Wired Controller.

Q: Controller is connected but has no function?

• A: Confirm you are using the Player #1 controller. For more troubleshooting refer to your Xbox console User Guide.

MOTION WARNING

Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendinitis, carpal tunne syndrome, skin irritation or eyestrain:

• Avoid excessive play. Take a 10 to 15 minute break every hour, even if you don’t think you need it. Parents should monitor their children for appropriate play.
• If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel symptoms such as tingling, numbness, burning or stiffness, stop and rest for several hours before playing again.
• If you continue to have any of the above symptoms or other discomfort during or after play, stop playing and see a doctor.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.

CAN ICES-003(B)/NMB-003(B)

This device complies with Industry Canada Iicense exempt RSS standard(s).Operation is subject to the following two conditions:

1. This device may not cause interference,and
2. this device must accept any interference, including interference that may cause undesired operation of the device

AUSTRALIAN WARRANTY STATEMENT

This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes with a One-year warranty from date of purchase.
Defects in the product must have appeared within One year from date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures.
Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer.

ADDITIONAL LEGAL
© 2022 ACCO Brands USA LLC. PowerA and PowerA Logo are trademarks of ACCO Brands Corporation. Microsoft, Xbox, Xbox “Sphere” Design, Xbox Series X|S, Xbox One, and Windows are trademarks of the Microsoft group of companies. All other trademarks are the property of their respective owners.

REGIONAL COMPLIANCE SYMBOLS

More information available via web-search of each symbol name

• Waste Electrical and Electronic Equipment (WEEE) Electrical and electronic devices contain materials and substances that can have damaging effects on human health and the environment. This symbol indicates that this device must not be treated as unsorted municipal waste but must be collected separately. Dispose of the device via a collection point for the recycling of waste electrical and electronic equipment within the EU, UK and in other European countries that operate separate collection systems for waste electrical and electronic equipment. By disposing of the device in the proper manner, you help to avoid possible hazards for the environment and public health that could otherwise be caused by improper treatment of waste equipment. The recycling of materials contributes to the conservation of natural resources
• The CE (Conformité Européene aka European Conformity) mark is a declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection.
• The UKCA (UK Conformity Assessment) mark is a declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.
• The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).

AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street South Yarra,
Australia VIC 3141
bluemouth.com.au
Email: support@bluemouth.com
au+61 3 9867 2666

MANUFACTURED FOR
ACCO Brands USA, LLC
4 Corporate Drive, Lake Zurich, IL 60047
ACCOBRANDS.COM
POWERA.COM

References

• ACCO Brands
• ANDS
• bluemouth.com.au
• PowerA | PowerA
• Support | PowerA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>