PowerA NSHS0138-01 Nintendo Switch Wired Earbud Instruction Manual
- June 1, 2024
- PowerA
Table of Contents
WIRED EARBUDS
FOR NINTENDO SWITCH™
USER MANUAL
NSHS0138-01 Nintendo Switch Wired Earbud
2-YEAR LIMITED WARRANTY SUPPORT
For warranty details or support with your authentic PowerA accessories, please
visit PowerA.com/Support.
MANUFACTURED FOR
ACCO Brands USA LLC, 4 Corporate Drive, Lake Zurich, IL 60047
ACCOBRANDS.COM | POWERA.COM
MADE IN CHINA
CONTENTS
NOTE
- Adjust volume levels directly on the Nintendo Switch console.
- Only some software titles support microphone or chat function. Please check the software title manual for compatibility or support.
- To avoid hearing damage, make sure the volume on the Nintendo Switch console is lowered before connecting the earbuds and do not use high volume settings for an extended period of time.
HEARING DAMAGE RISK
High sound pressure! Do not listen at high volumes for long periods.
- SETUP
- MIC MUTE
- EARBUD TIP SETUP
- SPECIFICATIONS
SPEAKERS
| Frequency Response | 20 HZ – 20 HZ |
|---|---|
| Transducer Type | Dynamic/Moving Coil – 8 mm |
| Impedance | 16 Ω |
| Maximum Input | 20 mW |
| Sensitivity | 105 dB ± 3 dB (@1 KHz) |
TROUBLESHOOTING
For current FAQs, visit PowerA.com/Support
Q1. Why do I hear static or no sound?
A1. Check that the 3.5 mm plug is fully plugged into the console or device.
A2. Confirm that the volume is turned up on the console or device.
Q2. Why can’t my friends hear me?
A1. Confirm that the mic is not muted on the inline controller.
A2. Confirm the software title supports chat function or microphone function
by referencing the software title manual. If chat and microphone are
supported, check software title menu for audio settings.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
WARRANTY AGAINST DEFECTS, AUSTRALIA AND NEW ZEALAND CUSTOMERS
This product is provided with a 2-year warranty against defects in
manufacturing or materials from the date of purchase. ACCO Brands will either
repair or replace a faulty or defective product subject to the conditions of
this warranty. Claims under this warranty must be made to the place of
purchase within the warranty period with proof of purchase by the original
purchaser only. Expenses associated with a warranty claim are the
responsibility of the consumer. Conditions of this warranty are on our
website: PowerA.com/warranty-ANZ
This warranty is provided in addition to other rights or remedies available to
you under the law. Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
DISTRIBUTOR CONTACT DETAILS
AUSTRALIAN CUSTOMERS
ACCO Brands Australia Pty Ltd
Locked Bag 50, Blacktown BC, NSW 2148
Phone: 1300 278 546
Email: consumer.support@powera.com
NEW ZEALAND CUSTOMERS
ACCO Brands New Zealand Limited
PO Box 11-677, Ellerslie, Auckland 1542
Phone: 0800 800 526
Email: consumer.support@powera.com
ADDITIONAL LEGAL
© 2023 ACCO Brands. All Rights Reserved. PowerA and PowerA Logo are trademarks
of ACCO Brands. All other registered and unregistered trademarks are the
property of their respective owners.
© Nintendo. Nintendo Switch is a trademark of Nintendo.
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each symbol name.
Waste Electrical and Electronic Equipment (WEEE): Electrical and
electronic devices contain materials and substances that can have damaging
effects on human health and the environment. This symbol indicates that this
device must not be treated as unsorted municipal waste but must be collected
separately. Dispose of the device via a collection point for the recycling of
waste electrical and electronic equipment within the EU, UK and in other
European countries that operate separate collection systems for waste
electrical and electronic equipment. By disposing of the device in the proper
manner, you help to avoid possible hazards for the environment and public
health that could otherwise be caused by improper treatment of waste
equipment. The recycling of materials contributes to the conservation of
natural resources.
Conformit Europene aka European Conformity (CE): A declaration from the
manufacturer that the product meets applicable European Directives and
Regulations for health, safety, and environmental protection.
UK Conformity Assessment (UKCA): A declaration from the manufacturer that the
product meets applicable UK Regulations for health, safety, and environmental
protection.
**** The RCM (Regulatory Compliance Mark) indicates that the product complies
with the relevant Australian and New Zealand electrical safety,
electromagnetic compatibility (EMC) and related requirements.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>