PowerA B07PDJ45BT Wired Controller for Nintendo Switch User Manual
- June 4, 2024
- PowerA
Table of Contents
WIRED CONTROLLER
USER MANUAL
B07PDJ45BT Wired Controller for Nintendo Switch
CONTENTS
- Wired Controller
- 10ft USB Cable
- User Manual
SET UP
- Make sure your Nintendo Switch™ System is powered on and connected to your TV.
- Insert the USB cable into a USB port on the Nintendo Switch Dock. Connect the other end of the cable to the wired controller. Your wired controller is now ready for use.
BASIC USAGE
Connect multiple wired controllers to the Nintendo Switch Console at a time.
On-screen notifications will indicate which USB channel each controller is
connected to.
TROUBLESHOOTING
Q1. Why isn’t my controller connecting to my Nintendo Switch Console?
A1. Confirm that the USB Cable is securely connected to the Wired Controller
and the Nintendo Switch Dock.
A2. Confirm that the Nintendo Switch is powered on and connected to an
external display before connecting your wired controller.
A3. Confirm that your Nintendo Switch has the latest System Update installed.
Q2. Why don’t I feel any vibration when using this controller?
A1. This product does not support vibration functionality
MOTION WARNING
Playing video games can make your muscles, joints, skin, or eyes hurt. Follow these instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation, or eyestrain:
- Avoid excessive play. Take a 10 to 15-minute break every hour, even if you don’t think you need it. Parents should monitor their children for appropriate play.
- If your hands, wrists, arms, or eyes become tired or sore while playing, or if you feel symptoms such as tingling, numbness, burning, or stiffness, stop and rest for several hours before playing again.
- If you continue to have any of the above symptoms or other discomforts during or after play, stop playing and see a doctor.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device
MANUFACTURED BY
ACCO Brands USA LLC,
4 Corporate Way, Lake Zurich, IL 60047
ACCOBRANDS.com | POWERA.com
MADE IN CHINA
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit
PowerA.com/Support.
WARRANTY
2-Year Limited Warranty: Visit
PowerA.com/support for details.
AUSTRALIAN WARRANTY STATEMENT
This product comes with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure. If purchased within Australia or New Zealand, this product
comes with a one-year warranty from the date of purchase. Defects in the
product must have appeared within One year from the date of purchase, in order
to claim the warranty. All warranty claims must be facilitated back through
the retailer of purchase in accordance with the retailer’s return policies and
procedures. Any expenses incurred, as a result of returning the product to the
retailer of purchase are the full responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street South Yarra, Australia VIC 3141
bluemouth.com.au | Email:
support@bluemouth.com.au +61 (3) 9867
2666
ADDITIONAL LEGAL
© 2021 ACCO Brands USA LLC. PowerA and PowerA Logo are trademarks of ACCO
Brands Corporation. Nintendo Switch is a trademark of Nintendo. Licensed by
Nintendo.
All rights reserved. All other trademarks are the property of their respective
owners.
REGIONAL COMPLIANCE SYMBOLS
More information is available via web-search of each symbol name.
| The WEEE (Waste of electrical and electronic equipment) symbol requires
battery disposal outside of other household waste per local regulations.
Contact your city office, waste disposal service, or retailer for guidance.
---|---
| The CE (European Conformity) mark is a declaration from the manufacturer
that the product meets applicable European Directives and Regulations for
health, safety, and environmental protection.
| The UKCA (UK Conformity Assessment) mark is a declaration from the
manufacturer that the product meets applicable UK Regulations for health,
safety, and environmental protection.
| The Regulatory Compliance Mark is a visible indication of a product’s
compliance with all applicable ACMA (Australian Communications and Media
Authority) regulatory arrangements, including all technical and record-keeping
requirements regarding electrical safety and/or electromagnetic compatibility
(EMC).
DECLARATION OF CONFORMITY
Hereby, ACCO Brands USA LLC at 4 Corporate Way, Lake Zurich, IL 60047 USA
declares that this wired controller is in compliance with Directive
2014/30/EU. The full text
of the EU Declaration of Conformity is available at the following internet
address: PowerA.com/compliance
TWO-YEAR LIMITED WARRANTY
For warranty details or support with your authentic PowerA accessories,
please visit PowerA.com/Support.
Customer Service
PowerA.com/Support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>