PowerA 1525991-01 Controller Charging Base User Manual
- June 3, 2024
- PowerA
Table of Contents
PowerA 1525991-01 Controller Charging Base
STATION DE RECHARGE
POUR MANETTES NINTENDO SWITCH
BASE DE CARREGAMENTO DE COMANDOS
PARA A NINTENDO SWITCH
TWO-YEAR LIMITED WARRANTY
For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.
CONTENTS
- Controller Charging Base
- USB-C Charging Adapter
- User Manual
SETUP
- Plug the USB cable of the Controller Charging Base into an available USB port on the Nintendo Switch dock.
- Locate the USB-C Charging Adapter from the storage compartment on the bottom of the Controller Charging Base.
- Plug the USB-C Charging Adapter into the USB-C port of the Nintendo Pro Controller or PowerA Wireless Controller for Nintendo Switch.
- Place the wireless controller onto the Controller Charging Base, ensuring that the USB-C Charging Adapter connects with the charging bar of the Controller Charging Base.
- Slide the Joy-Con™ controllers all the way down onto the Joy-Con channels of the Controller Charging Base.
- LED indicators on the front of the Controller Charging Base indicate the charging status. A red LED indicates charging, while a green LED indicates a full charge.
- Once charged, lift the controller off the Controller Charging Base when you are ready to play!
TROUBLESHOOTING
For current FAQs, visit PowerA.com/Support
Q: Why are my wireless controllers not charging?
A: Confirm the USB cable of the Controller Charging Base is fully plugged into
a USB port on the Nintendo Switch dock.
Confirm the USB-C Charging Adapter is fully plugged into the wireless
controller.
Confirm the Nintendo Switch dock is connected and powered via the Nintendo
Switch AC Adapter.
Try reconnecting the Controller Charging Base to the Nintendo Switch dock.
Try reconnecting the wireless controller to the Controller Charging Base.
Q: Why are my Joy-Con controllers not charging?
A: Confirm the USB cable of the Controller Charging Base is fully plugged into
a USB port on the Nintendo Switch dock.
Confirm the Nintendo Switch dock is connected and powered via the Nintendo
Switch AC Adapter.
Confirm the Joy-Con controllers are pressed down all the way.
Try reconnecting the Controller Charging Base to the Nintendo Switch dock.
Try reconnecting the Joy-Con controller(s) to the Controller Charging Base.
CONTROLLER CHARGING BASE
- INPUT VOLTAGE (X, V) 5V MAX
- INPUT CURRENT (X.X, A) 0.5A MAX
- OUTPUT VOLTAGE (X.X, V) 5V MAX
- OUTPUT CURRENT (X.X, A) 0.5A MAX
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party re-sponsible for compliance could void the user’s authority to operate the equipment.
CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device.
MANUFACTURED FOR
ACCO Brands USA LLC
4 Corporate Drive, Lake Zurich, IL 60047
ACCOBRANDS.com | POWERA.com
MADE IN CHINA
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit
PowerA.com/Support.
WARRANTY
2-Year Limited Warranty:
Visit PowerA.com/Support for details.
AUSTRALIAN WARRANTY STATEMENT
This product comes with guarantees that can-not be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure. If purchased within Australia or New Zealand, this product
comes with a one-year warranty from date of purchase. Defects in the product
must have appeared within one year from date of pur-chase, in order to claim
the warranty. All warranty claims must be facilitated back through the
retailer of purchase in accordance with the retailer’s return policies and
procedures. Any expenses incurred, as a result of returning the product to the
retailer of purchase are the full responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street
South Yarra, Australia VIC 3141
bluemouth.com.au
Email: support@bluemouth.com.au
+61 (3) 9867 2666
ADDITIONAL LEGAL
© 2022 ACCO Brands USA LLC. PowerA and the PowerA Logo are trademarks of ACCO
Brands Corporation. Nintendo Switch is a trademark of Nintendo. Licensed by
Nintendo.
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each symbol name.
Waste Electrical and Electronic Equipment (WEEE): Electrical and electronic devices contain materials and substances that can have damaging effects on human health and the environment. This symbol indicates that this device must not be treated as unsorted municipal waste but must be collected separately. Dispose of the device via a collection point for the recycling of waste electrical and electronic equipment within the EU, UK and in other European countries that operate separate collection systems for waste electrical and electronic equipment. By disposing of the device in the proper manner, you help to avoid possible hazards for the environment and public health that could otherwise be caused by improper treatment of waste equipment. The recycling of materials contributes to the conservation of natural resources.
Conformity Europene aka European Conformity (CE): A declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection.
UK Conformity Assessment (UKCA): A declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.
Regulatory Compliance Mark (RCM): A visible indication of a product’s
compliance with all applicable ACMA
(Australian Communications and Media Authority) regulatory arrangements,
including all technical and record keeping requirements regarding the
electrical safety and/or electromagnetic compatibility (EMC).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>