PowerA Charging Stand for DUALSHOCK 4 Wireless Controllers User Manual
- June 4, 2024
- PowerA
Table of Contents
PowerA Charging Stand for DUALSHOCK 4 Wireless Controllers User Manual
USE
- Connect the USB Charging Adapter to the Micro B input located on your DUALSHOCK®4 wireless controller.
- Connect the Charging Stand to your PlayStation®4 USB input or any other powered USB input by connecting the USB plug into a powered USB input.
- Place your DUALSHOCK®4 wireless controller on the Charging Stand, and press down. The DUALSHOCK®4 wireless controller will illuminate orange to indicate charging status. When fully charged the DUALSHOCK®4 wireless controller illumination will turn “OFF” indicating a full charge.
TROUBLESHOOTING
Q1. The Charging Stand is connected to my PlayStation®4, but its not charging.
A1. Make sure your PlayStation®4 is in “rest” mode or powered “ON”. The USB inputs on the PlayStation®4 are not active when the PlayStation®4 is completely powered “OFF”
Q2. My DUALSHOCK®4 wireless controller is charging but the illumination is not Orange?
A2. If your DUALSHOCK®4 wireless controller is still paired to the PlayStation®4 while you are charging the illumination will remain your “Channel” color.
Q3. How do I check the charge status of my DUALSHOCK®4 wireless controller?
A3. Pair your DUALSHOCK®4 wireless controller to the PlayStation®4 and check the on-screen battery indicator for charge status.
FCC STATEMENT (US ONLY)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Note: This equipment has been tested and found to comply with the
limits for Class B digital device, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B) (CANADA ONLY)
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device
MANUFACTURED BY
ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047 ACCOBRANDS.com | POWERA.com | Made in China
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit PowerA.com/Support.
WARRANTY
2-Year Limited Warranty: Visit PowerA.com/Support for details.
AUSTRALIAN WARRANTY STATEMENT
This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes with a one-year warranty from date of purchase. Defects in the product must have appeared within one year from date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures. Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street South Yarra, Australia VIC 3141
bluemouth.com.au | Email:
support@bluemouth.com.au
+61 (3) 9867 2666
ADDITIONAL LEGAL
© 2021 ACCO Brands USA LLC. PowerA and PowerA
Logo are trademarks of ACCO Brands Corporation. “ ”, “PlayStation”, “PS4”, and
“DUALSHOCK” are registered trademarks or trademarks of Sony Interactive
Entertainment Inc. All rights reserved. All other trademarks are the property
of their respective owners. Manufactured and distributed under license by Sony
Interactive Entertainment LLC.
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each symbol name.
(EU, UK, and Turkey Only) The WEEE (Waste of electrical and electronic equipment) symbol requires battery disposal outside of other household waste per local regulations. Contact your city office, waste disposal service, or retailer for guidance.
(EU and Turkey Only) The CE (Conformité Européene aka European Conformity) mark is a declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection.
(UK Only) The UKCA (UK Conformity Assessment) mark is a declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.
(Australia only) The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).
DECLARATION OF CONFORMITY
Hereby, ACCO Brands USA LLC at 4 Corporate Way, Lake Zurich, IL 60047 USA, declares that this wired charger is in compliance with Directive 2014/30/EU. The full text of the EU Declaration of Conformity is available at the following internet address: PowerA.com/compliance
TWO-YEAR LIMITED WARRANTY
For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>