Gude GSK 110 LTR Sandblast Cabinet Instruction Manual

: June 3, 2024
: Gude

Table of Contents

Gude GSK 110 LTR Sandblast Cabinet
Signs on Unit
Technical Data
Supply includes
Warranty
General Safety Regulations
Supplementary Safety Rules
Behavior in case of emergency
Assigned Use
Disposal
Requirements for operating staff
Technical Data
Safety instructions for commissioning
Transportation and Storage
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Gude GSK 110 LTR Sandblast Cabinet

| Please read carefully the following Operating Instructions

before putting the appliance into operation!

Reissues, even if partial, should be authorized. Technical changes reserved

---|---
| Do you have any technical questions ? Any claim? Do you need any spare parts or operating instructions ?

We will quickly help you without needless bureaucracy at our home page www.guede.comin the Service part. Please help us be able to help you. In order to be able to identify your appliance in case of a claim, we need the serial No., Order No. and year of production. All this data can be found on the type label. Please enter the data below for future reference.

Serial No.: Order No.: Year of production:

| Tel.:| +49 (0) 79 04 / 700-360| Fax:| +49 (0) 79 04 / 700-51999| E-Mail:| support@ts.guede.com

Signs on Unit

Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product safety:

****	Product compliance with respective EU standards

Warning:

|
---|---

Warning/Caution

|

Warning against dangerous voltage

Bans:

| General ban (combined with another pictograph
---|---

Commands:

|
---|---

Read the instruction manual before use

|

Wear ear protectors. Wear goggles

Environment Protection:

|
---|---

Wastes are to be disposed of in a professional manner not to harm the environment.

|

Cardboard packaging is to be collected for recycling.

|

Faulty and/or disposed of electrical/electronic appliances are to be collected by authorized salvage places.

|

Packaging

|
---|---

Keep away from moisture

|

The package should be held

upwards

|
Fragile|

Technical Data

****	****
air requirement	working pressure
Max. allowable pressure	Weight

Supply includes

Take the device out of the transport package and check whether the following parts are included:

Sand cabinet
Sand gun
4/5/6/7 ceramic nozzles
5 spare foils
Storage grid
Teflon tape
2 m sealing tape
12 V power pack
Original Operating Instructions Services

Please contact your dealer if any parts are missing or damaged.

Warranty

A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences on the day of purchase of the device. Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with an indication of the date of sale must be presented in case of claiming the warranty rights. The warranty does not cover unprofessional use such as device overload, violent use, damage caused by third parties or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear.

General Safety Regulations

To be able to operate the unit in a safe manner, you should observe any instructions and information on safety, assembly, and operation contained herein. Any persons operating and maintaining the unit should be familiarized with any possible risks. Keep children, the sick, and infirm persons away from the unit. Supervise the children very carefully if they stay near the unit. Also, observe any accident prevention regulation effective in your region. The same applies to provisions on health protection in the working areas.
The manufacturer shall not be held liable for any unauthorized changes made to your machine that caused damage.
Warning! You should always observe the general safety precautions when using the machine and mechanical tools. Kindly abide by any notices and orders contained in the supplementary safety instructions and elsewhere.
TO ENABLE US TO GUARANTEE A HIGH DEGREE OF SAFETY, FOLLOW THE INSTRUCTIONS BELOW CAREFULLY:
CAUTION!
Compressed air tools work at various working pressure. The recommended working pressure for the majority of machines is 6 bar. Any higher pressure reduces the service life of your unit due to a higher load.

Do not let any authorized persons approach the machine. Visitors and persons standing by, primarily children and the sick and infirm persons should not be permitted to access the site. Prevent any other persons from contact with the unit.
Take proper care of storing the unit. Any tools out of use should be kept at a dry elevated place – or locked as appropriate – to prevent unauthorized access.
Use only proper tools for any job. For example, never use small tools or accessories to do a job that requires heavy tools. Use any tool for the purpose it was designed for.
Mind proper clothing. Work clothing should fit the purpose and should not tie you up.
Use ear protection. Wear personal hearing protection equipment, such as ear protectors.
Moving the unit. Secure the cabinet against rollover, damage, and the steel material coming out.
Be on alert at any time. Watch out for what you are doing. Use common sense. Do not work with the cabinet when you feel tired. You should not work with it when under the effect of drugs, alcohol, or medicaments that may affect your responses.
Have an eye for damaged parts. Before getting down to work, check the unit for damaged parts. Even if the damage is minor, be serious about it and consider it to see whether the unit is able safely and perfectly. Make sure that the moving parts are aligned and adjusted as appropriate. Do the parts fit correctly? Are they damaged? Is everything installed correctly? Do the pressure conditions enable a correct function of the unit? Any damaged protection devices should be repaired or replaced by an authorized person unless the operating manual states expressly otherwise. An authorized workshop should replace any defective/faulty switches. Any repairs should be referred to your local servicing center.
Use approved spares only. Use only genuine spare parts for repairs and maintenance. Request the spare parts from a respective servicing center only.

Warning! Use of accessories and extensions other than expressly recommended may imply a personal and material risk. The unit is allowed to be used for a specific purpose only. Any deviation will be considered an unauthorized use The user only – and not the manufacturer – shall be held liable for personal injuries and material damage arising from such unauthorized use. The manufacturer shall not be held liable for any damage resulting from unskilled changes of the unit or an unqualified use.

Supplementary Safety Rules

Before performing any maintenance, inspection, and cleaning away the sandblast cabinet is always from the compressor.
Make the operating manual available to anybody working with the unit.
Never use the unit with the cover opened.
Work only with the pressure recommended in this manual.
Operate the unit only with the fitted gloves.
Use only the proper blasting material.
Make sure that the lighting is appropriate.
Be careful to wear appropriate working clothing.
Only the persons of age should use this unit. Apprentice of 16+ years of age may use it under supervision of adults.
In the course of the unit use, children, the sick and infirm should be kept away.
Check the unit for damage. Do not use it if it shown defects or is damaged.
Have the unit repaired by an authorized servicing centre. Do not attempt any repairs by yourselves. Only an authorised servicing centre may do the repairs and parts replacements.
Where practicable, any person working with this unit should not be disturbed.
The unit protection devices should never be removed or made duff.
Damaged or defective protection devices should be replaced immediately.
If you are disturbed while working with the unit, realise the situation before you pay attention to a new one. Check any screws, nuts and other joints for tightness at regular intervals.
Never store tools or materials above the unit so that a fall on the unit could be possible when trying to reach them.
Always disconnect the compressed air and power supply to remove a fault.
Any adjustment, measurement, cleaning etc. may not be done unless the compressed air and power supply is interrupted.
Never leave your workplace unattended.
If any repairs or maintenance is done on the safety devices, these should be re-installed immediately after the works are completed.
It is an unconditional requirement for you to familiarise yourself with any safety regulations and accident preventions as well as the general safety rules applied in the place of the unit use.
Check the unit regularly to see that it does not show any signs of damage.
You should test any of the protection devices before the use of the unit. Make sure to see that any damaged parts work properly even if the damage seems to be negligible.
Check any of the moving parts to see that they work perfectly. Be particularly careful about damage or jamming of the moving parts. All the parts have to be installed correctly and any conditions of perfect function of the unit should be met.
Unless otherwise stated in this manual , any damaged parts and safety devices should be repaired/replaced by an authorised servicing centre.
Have the damaged switch replaced by an authorised servicing centre.
This unit is in compliance with any relevant safety provisions. Repairs should be done only by qualified electricians at an authorised servicing centre and only the original spare parts should be used. If this provision is not observed, the risk of accidents is imminent.
Do not use the unit when your attention is reduced or you are affected by alcohol or drugs or tired.

Behavior in case of emergency

Provide necessary first aid treatment corresponding to the injury nature and seek qualified medical help as soon as possible. Protect the injured person from other injuries and calm him/her down. A first aid kit must always be available in the place of your work in case of an accident in accordance with DIN 13164. Material taken out of the first aid kit needs to be supplemented right away. If help is needed, please provide the following details:

Place of accident
Accident nature
Number of injured persons
Injury type

Assigned Use

For Sans rays of small to medium metal parts. It is very important to the compressor, shall be blasted with, according to a size large. The sandblasting gun consumes approximately 200-600 l / min., Ie it takes at least a compressor to achieve 50 l and 300 l suction tanks for optimum results. The device cannot be used for works other than for which the device has been designed and that are specified in the Operating Instructions. Any other use is use in conflict with the designation. The manufacturer will not be held liable for any consequential damage and injuries. Please be sure to know that the device has not been designed for industrial purposes.

Disposal

The disposal instructions are based on icons placed on the device or its package. The description of the meanings can be found in the “Marking“ section.
Transport package disposal The package protects the device against damage during transport. Packing materials are usually chosen depending on their environmental friendliness and disposal method and can therefore be recycled. Returning the package to material circulation saves raw materials and reduces waste disposal costs. Parts of packages (e.g. foils, styropor®) can be dangerous to children. Risk of suffocation! Keep parts of the package away from children and dispose of them as soon as possible.

Requirements for operating staff

The operating staff must carefully read the Operating Instructions before using the appliance.

Qualification
Apart from the detailed instructions by a professional, no special qualification is necessary for appliance use.

Minimum age
Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education.

Training
Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.

Technical Data

Air consumption :	200-600 l/min

Highest permissible

pressure :

| 8 bar
Working pressure :| 2-8 bar
Cabinet dimensions inner.:| 685 x 457 x 419 mm
Cabinet dimensions

outer.:

| 760 x 457 x 720 mm
Weight:| 26 kg
Product No.:| 40020

Safety instructions for commissioning

Always work with the cover closed. Use the fitted gloves at any time.

Putting the device into operation (pic. 1)

Connect air supply (max. 7 bar) to the fitting on the side of the cabinet.
Check if there are any leaks for air. If any, repairing or adding Teflon tape is needed.
Plug the 12V power supply into an 230V wall outlet. Ensure the switch is in the OFF position; plug the other end of 12V power supply cord into the light switch on the cabinet.
Check if the light works.
Add a plastic window protector to the inside surface of the glass door
Eye protection need to be done before load no more than 33 liters in to the cabinet. Excessiveness will cause the ineffective performance.
Close and latch door.
Protect your hands in gloves, aim blast gun at surface to be cleaned and pull trigger. If there is no flow, please clear the tube by covering the gun nozzle.
Move the blast stream continuously over the part in an even and circular motion.