eurolite 50101950 Mirror Ball 20cm Motorized Instruction Manual
- June 5, 2024
- eurolite
Table of Contents
- eurolite 50101950 Mirror Ball 20cm Motorized
- Product Information
- Product Usage Instructions
- INTRODUCTION
- Product features
- IMPORTANT SAFETY INSTRUCTIONS
- INSTALLATION
- CLEANING AND CARE
- PROTECTING THE ENVIRONMENT
- TECHNICAL SPECIFICATIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
eurolite 50101950 Mirror Ball 20cm Motorized
Product Information
Specifications
- Model: Half Mirror Ball
- Available Sizes: 20cm, 30cm, 40cm, 50cm
- Power Supply: 230 V AC, 50 Hz
- Total Power Consumption: 3.5 W
- Protection Class: IP20
- Safety Class: Class I
- Rotation Speed: 1-2.5 revolutions per minute
- Weight: Ranges from 1 kg to 5.3 kg depending on size and color
Product Usage Instructions
Installation
Ensure the mirror ball is securely installed to prevent any risk of
falling. Installation should be done by a specialist familiar with relevant
regulations.
Cleaning and Maintenance
Regularly clean the mirror ball to maintain its reflective surface. Use a
soft cloth and mild cleaning solution to remove dirt and smudges. Avoid using
harsh chemicals that may damage the mirror coating.
Environmental Protection
Dispose of the product responsibly at the end of its lifecycle according to
local regulations to minimize environmental impact.
Technical Data
Model| Color| Voltage| Total Power| Protection Class| Safety Class| Rotation
Speed| Weight
---|---|---|---|---|---|---|---
50101950| Silver| 230 V AC, 50 Hz| 3.5 W| IP20| Class I| 2.5 U/min| 1 kg
Frequently Asked Questions (FAQ)
-
Q: How do I change the rotation speed of the mirror ball?
A: The rotation speed of the mirror ball is typically adjusted using a control knob or switch located on the motor unit. Refer to the user manual for specific instructions on changing the rotation speed. -
Q: Can I use the mirror ball outdoors?
A: It is not recommended to use the mirror ball outdoors as exposure to elements like rain and direct sunlight can damage the mirror coating and motor components.
HALF
MIRROR BALL
motorized 20/30/40/50 cm
Mirror Ball
Spiegel-Halbkugel mit Motor Mirror half ball with motor
- No. 50101950
- No. 50101952
- No. 50101954
- No. 50102050
- No. 50102052
- No. 50102054
- No. 50102130
- No. 50102132
- No. 50102134
- No. 50102120
- No. 50102122
- No. 50102124
www.eurolite.de
motorized 20/30/40/50 cm
D00126790, version 1.0, publ. 13/11/2019
For product updates, documentation, software and support please visit
www.eurolite.de. You can find the latest version of
this user manual in the product’s download section.
© 2019 Eurolite. All rights reserved.
No part of this document may be reproduced in any form without the written
permission of the copyright owner. The contents of this document are subject
to revision without notice due to continued progress in methodology, design,
and manufacturing. Eurolite shall have no liability for any error or damage of
any kind resulting from the use of this document.
All trademarks mentioned herein are the property of their respective owners.
Experience Eurolite. Product videos, suitable accessories, firmware and software updates, documentation and the latest news about the brand. You will find this and much more on our website. You are also welcome to visit our YouTube channel and find us on Facebook.
www.youtube.com/ eurolitevideo
www.facebook.com/ Eurolitefans
INTRODUCTION
Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is
your connection to the world of show with an unparalleled variety of products,
both for professionals and beginners.
If you follow the instructions given in this manual, we are sure that you will
enjoy this product for a long period of time. This user manual will show you
how to install, set up and operate your new Eurolite product.
Users of this product are recommended to carefully read all warnings in order
to protect yourself and others from damage. Please keep this manual for future
needs and pass it on to further owners.
Product features
- Half ball with a stable plastic core
- Ideal for ceiling mounting at standard room heights
- Robust mounting bracket for ceiling mounting with dowels
- Exact alignment
- Genuine glass mirror facets 10 x 10 mm
- Integrated motor
- Supply cable with safety plug
- Available in different sizes and colors
- Suitable for party rooms, dance schools, clubs, bars, stages, shop windows, etc.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
Please read the safety warnings carefully and only use the product as
described in this manual to avoid accidental injury or damage.
Intended use
- This mirror ball is used in connection with adequate illumination to create decorative indoor lighting effects. The mirror ball is designed for ceiling mounting and driven by a motor. This product is designed both for private and professional use in the field of event technology, e.g. in discos. Only use the product according to the instructions given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not assume any liability for any resulting damage.
- Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the warranty invalid.
Warning – risk of injuries
WARNING!
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing
down! Make sure that the mirror ball is installed securely and cannot fall
down. The installation should be carried out by a specialist who is familiar
with the hazards and the relevant regulations.
- If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer. Improper installation can result in bodily injury and or damage to property.
- The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety precautions.
- For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.
- If the mirror ball is to be operated above persons, additional risks arise. A hazard analysis based on the location and application must be performed in order to ensure dimensioning and measures for a safe operation. The mirror ball meets the professional association safety regulations regarding safety and operation.
- The operator has to make sure that the installation is approved by a specialist before taking into operation for the first time, after changes, and at reqular intervals.
- Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
- When handling mirror balls always wear gloves. Observe the danger of cutting and splintering by glass!
- Make sure that no side forces can impact on the installation and the rotation of the mirror ball is never slowed down or stopped by decoration material etc.
Danger to children and people with restricted abilities
- This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
- This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Danger due to electricity
- The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
- To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the device.
- Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never deactivate the protective ground of a mains cable. Failure to do so could possibly injure the user.
- The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
- Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
- The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
- Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
- Unplug the device during lightning storms, when unused for long periods of time or before cleaning.
- Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations or heavy mechanical stress. The admissible ambient temperature range is -5 to +45°C.
- Do not place any objects filled with liquids on the device.
- Do not place any open sources of fire, such as burning candles, on or directly next to the device.
- Make sure that objects cannot fall into the device, in particular metal parts.
- Only have repairs to the device or its mains cable carried out by qualified service personnel. Repairs are required when the device or the mains cable is visibly damaged, liquid has been spilled or objects have fallen into the device; when the device has been exposed to rain or moisture, has been dropped or malfunctions occur.
- Cleaning of the device is limited to the surface. Make sure that moisture does not come into contact with any areas of the terminal connections or mains voltage control parts. Only wipe off the product with a soft lint-free and moistened cloth. Never use solvents or aggressive detergents.
INSTALLATION
The device can be fastened to a ceiling with at least two screws via the holes
in the mounting bracket. Always choose screws and plugs which are suitable for
use in your ceiling and have enough holding power. Fasten the device in such
way that it will not fall down.
To power on simply connect the product to the mains. The motor starts to
rotate. To power off unplug the product. For a more convenient operation, use
a mains outlet which is switchable.
CLEANING AND CARE
The product is maintenance-free, except for occasional cleaning. You can use a lint-free, slightly dampened cloth for cleaning. Disconnect the product from power before cleaning. The product does not contain any parts to be maintained. Do not attempt repairs as this is a security risk. Should you have further questions, please contact your dealer.
PROTECTING THE ENVIRONMENT
Disposal of old equipment
When to be definitively put out of operation, take the product to a local
recycling plant for a disposal which is not harmful to the environment.
Devices marked with this symbol must not be disposed of as household waste.
Contact your retailer or local authorities for more information. Remove any
inserted batteries and dispose of them separately from the product.
TECHNICAL SPECIFICATIONS
Mirror balls, Ø 20cm
**** Item no.:| 50101950 silver
50101952 gold
50101954 black
---|---
Power supply:| 230 V AC, 50 Hz
Power consumption:| 3.5 W
IP classification:| IP20
Protection class:| Protection class I
Power connection:| Power supply cord with safety plug
Rotation:| 2.5 RPM
Weight:| 1 kg
Mirror balls, Ø 30cm
Item no.:
| 50102050 silver
50102052 gold
50102054 black
---|---
Power supply:| 230 V AC, 50 Hz
Power consumption:| 3.5 W
IP classification:| IP20
Protection class:| Protection class I
Power connection:| Power supply cord with safety plug
Rotation:| 2.5 RPM
Weight:| 1.5 kg
Mirror balls, Ø 40cm
Item no.:
| 50102120 silver
50102122 gold
50102124 black
---|---
Power supply:| 230 V AC, 50 Hz
Power consumption:| 3.5 W
IP classification:| IP20
Protection class:| Protection class I
Power connection:| Power supply cord with safety plug
Rotation:| 1 RPM
Weight:| 3.7 kg
Mirror balls, Ø 50cm
Item no.:
| 50102130 silver
50102132 gold
50102134 black
---|---
Power supply:| 230 V AC, 50 Hz
Power consumption:| 3.5 W
IP classification:| IP20
Protection class:| Protection class I
Power connection:| Power supply cord with safety plug
Rotation:| 1 RPM
Weight:| 5.3 kg
Specifications are subject to change without notice due to product
improvements.
Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297
Waldbüttelbrunn Germany D00126790 Version 1.0 Publ. 13/11/2019