eurolite 70064699 QuickDMX Wireless Receiver User Manual

70064699 QuickDMX Wireless Receiver
User Manual

70064699 QuickDMX Wireless Receiver

QuickDMX
Wireless Receiver
Battery-powered wireless DMX receiver 2.4 GHz
No. 70064699

www.eurobtade

USER MANUAL
Thank you for purchasing this compact OuickDMX receiver for wireless transmission of DMX signals in lighting installations. It can receive up to 512 DMX channels from compatible OuickDMX transmitters. The units operate in the 2.4 GHz range of the generally approved ISM band. The GFSK modulation and FHSS technology with 1100 frequency hops per second (on 79 channels) allow for interference-free Operation alongside other wireless devices (e.g. Wi-Fi and Bluetooth). The maximum range is 400 rn. The internal rechargeable battery provides up to 20 hours continuous operation. A charging cable and power adapter are included In delivery.

SAFETY WARNINGS

Please read these instructions carefully before using the product. They contain important information for the correct use of your product. Please keep them for future reference.

• The power adapter uses dangerous mains voltage. Inexpert handling may result in electric shock.
• This product is suitable for Indoor use only. Protect the product against high air humidity, water or heat sources. The recommended temperature range is -5 to +45 °C
• Only use the product according to the Instructions given herein. No guarantee claims lathe units and no liability for any resulting personal damage or material damage will be accepted if the product is used for other purposes than originally intended, if it is not correctly connected or operated, or if it is not repaired in an expert way.
• Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the warranty invalid.
• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly.
• This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who Is responsible fortheir safety.
• This product is maintenance-free, except for occasional cleaning. You can use a slightly dampened cloth for cleaning. Never use alcohol or solvents. Before cleaning, disconnect the product from the mains.
• Only open the product to remove the rechargeable battery. If this product is no longer working properly or is visibly damaged, take It out of operation and consult your local dealer. Do not attempt to repair the product yourself.
• Handle the product with care, it can be damaged by impacts, blows, or accidental falls, even from a low height
• Do not throw the battery or the product into a fire. There is a risk of explosion and fire!
• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or afire!
• Lithium batteries Can Cause serious injuries if short-circuited, overheated or mechanically damaged. There is a risk of explosion and fire if the battery casing is damaged! Only extinguish burning lithium batteries with powder extinguishers or other suitable extinguishing agents.
• Charge the rechargeable battery regularly, even if you are not using the product. If regulady recharged, the battery retains its capacity and is ready to for use for several years and thus extremely robust and long-lived.

PROTECTING THE ENVIRONMENT

When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information.
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries. Disposing of them in the household waste is prohibited. You may return your used batteries free of charge to collection points in your municipality and anywhere where batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly, you contribute to the protection of the environment

OPERATION

1. XLR jack
2. On/off button
3. Group button
4. Battery indicator
5. Group indicator
6. Power input

1. Set the receiver into operation by pressing the recessed on/off button (2). The LED (4) will briefly flash in red > green > blue and then indicate the battery level for 5 seconds. The LED then goes out Briefly press the recessed group button (3) to display the battery level again for 5 seconds. If the LED flashes red, the battery must be charged.
2. Set the transmitter and receiver to the same transmission group. Six groups are available (red, green, blue, yellow, cyan, magenta). To change the group of a unit, briefly press the group button (3) repeatedly until the LED (5) lights up in the color of the desired group. The wireless DMX network is now set up and the units are paired. The assignment of the receiver to the transmitter is kept memorized even after switching off. The group function allows you to operate up to 6 independent DMX wireless networks in parallel, each with 512 DMX channels. You can also use one transmitter with several receivers in the same group.
3. Connect the receiver to the DMX input of a DMX-controlled unit. The LED (5) starts flashing in green when DMX signals are received.

CHARGING

1. Fully charge the battery before first use and when the battery indicator (4) starts flashing in red. To charge the battery, plug in the charging cable and connect the device to the power adapter and a power outlet or use a USB power source.

2. While charging, the LED (4) will show the battery level when the receiver is switched on as follows:
   <40% = ligMs solid red
   40-713% = flashing green
   70-100% = flashing blue
   100% = lights solid blue
   When the receiver is switched off, the LED lights up red continuously and goes out when fully charged.

3. The discharge state Is Indicated in battery mode as follows:
   100-70% = LED lights up blue
   70-40% = LED lights up green
   40-10% = LED lights up red
   10% = LED flashes red
   If the capacity falls below 10%, the LED flashes faster and faster until the battery is exhausted.

TECHNICAL SPECIFICATIONS

Power supply…………………………………….. 5 V DC, 350 mA
Battery pack type: ……………………..Lithium ion 3.7 V, 380 mAh, 1 AWh
Battery operation: ………………………….up to 20 hours
Frequency range:……………………………. 2.402-2.480 GHz, 79 channels
Modulation……………………………………… GFSK
Spread spectrum…………………………….: FHSS, 1100 channel hops/sec
Sensitivity……………………………. 96 dBm
Range…………………………………. 400 m
DMX output…………………… 3-pin XLR, female
Pin conf iguratiorr …………………..1= ground, 2 = signal -, 3 = signal +
Dimensions……………………… 031 flmmx95mm
Weight…………………………………… 160g
Subjectto change.

Eurolite Is a brand of SteinIgke ShowtecMic GmbH
Andreas-Baw-Stz 5
**** 97297 Waldtaitteletunn, Germany

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>