GTPLAYER GT002 Adjustable Gaming Chair Instruction Manual
- June 5, 2024
- GTPLAYER
Table of Contents
GT002 Adjustable Gaming Chair
Instruction Manual
Dear Customer,
Thank you for choosing us. We appreciate your trust in us and value your
business. Please feel free to email us directly if you have immediate feedback
or concerns about your purchase. We’ll reply within 24 hours.
At GTPLAYER, we’re always working hard to provide higher-quality products and
services for our customers by listening to buyers’ comments and concerns. Our
customers also rely on reviews from insightful people such as yourself to
decide which of our products is right for them.
If you have a moment to spare, please leave us feedback or review. It’s a very
quick and easy way for you to make a difference in how we provide services for
customers around the world.
We would really appreciate the help if you have the time, but totally
understand if not.
Either way, we look forward to serving you again in the future.
If you have any further questions, please do not hesitate to contact our
customer service for help.
ASSEMBLY INSTRUCTIONS
Check Various Accessories
Details of accessories
Please check and ensure the things are in the package. You can contact us for help if something is not included.
Instructions Before Using
Chair of Installation
Please keep the original box in case you might need to return or replace the product.
-
Place the chair base upside down. Insert the tip of part J1 into J2 and fix it with M6*20 screws.
-
Insert the casters into the bottom of the base. Install gas lift and insert gas lift cover.
-
Install the mechanism and armrests. Attention
DO NOT tighten screws completely until all the screws are fixed in the correct position. -
Place the seat on the gas lift. NOTE: Assembly is recommended to be carried out by two people.
Preventing the screws from loosening requires tightening after using a period of time. -
Align f & m with the holes of the seat, then tighten screws.
-
Align f & m with the holes of the back, then tighten screws.
-
Put M5*8 screw through the hole of R1 & L1 and tighten, then put the cap on.
-
Install R2 & L2 < with M5* 8 screw, then put the cap on.
-
Attach the headrest & lumbar pillow.
Functions
A Lift up the button on the side of the arm to adjust the arm height, raise or lower to the desired position.
B Lift the handle to recline and release it to any desired position. Rest on the back when resetting back to its normal position, otherwise, the back may rebound rapidly.
C 1. Pull upward on the lever to achieve height adjustment.
2. Push into the lock, and pull out to unlock the tilt of the chair.
D Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it clockwise to decrease the angle, counterclockwise to increase the angle.
Frequently Asked Questions:
Q: Why do I hear a creaking sound after using it for a period of time?
A: The mechanism may not fit the seat base. If you hear a creaking sound,
please remove the mechanism and reassemble it again. Please ensure all the
screws are securely tightened.
E-mail: [email protected]
PACKAGE CONTENTS
| A | Back | (X1) |
|---|---|---|
| B | Seat | (X1) |
| C | Caiklechanism | (X1) |
| D | Gas Lift Cover | (X1) |
| E | Headrest | (X1) |
| F | Angle Adjuster | (X1) |
| G | Caster | (X5) |
| H | Wrench | (X1) |
| I | Armrest | (X2) |
| J | Base | (X1) |
| K | Lumbar Pillow | (X1) |
| L | Gas Lift | (X1) |
| M | Connector | (X1) |
| N | Dust Cover | (X4) |
| Screws and Caps, as shown |
- Place the chair base upside down. Insert the tip of the part J1 into J2 and fix it with M6*20 screws.
- Insert the casters into the bottom of the base. Install gas lift and insert gas lift cover.
- Install the mechanism and armrests.
- Place the seat on the gas lift.
- Align f Erni with the holes of the seat, then tighten the screws.(Attention : Screw 50% tight)
- Align f 8-m with the holes of the back, then tighten the screws. (Attention Tighten all the screws completely until they are fixed in the correct position.)
- Put M5* 8 screw through the hole of R1 Et R1 and tighten, then put the cap on.
- Put M5* 8 screw through the hole of L1 Er L2 and tighten, then put the cap on.
- Attach the headrest Et lumbar pillow.
Functions
A. Lift up the button on the side of the arm to adjust the arm height, raise or lower to the desired position.
B. Lift the handle to recline and release it to any desired position. Rest on the backrest when resetting back to its normal position, otherwise, the backrest may rebound rapidly.
C. (1) Pull upward on the lever to achieve height adjustment. (2) Push in to lock, pull out to unlock the tilt of the chair.
D. Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it clockwise to decrease the angle, counterclockwise to increase the angle.
E-mail: [email protected]
Best regards