GTPLAYER GTSPKER1 Bluetooth Speakers User Manual
- June 3, 2024
- GTPLAYER
Table of Contents
- GTPLAYER GTSPKER1 Bluetooth Speakers
- Package components
- Appearance
- Button and LED Lights introductions
- Setting up your speakers
- Connecting Audio Sources
- Bluetooth Mode
- Product specification
- Maintenance and Care
- FCC STATEMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GTPLAYER GTSPKER1 Bluetooth Speakers
Package components
- Speaker(Main): x1pc
- USB Cable: x1pc
- User manual: x1pc
- Speaker(Sub): x1pc
- 3.5mm AUX audio cable: x1pc
Appearance
- USB Cable
- 3.5mm AUX audio cable
- Control knob
- LED light
- Touch button
Button and LED Lights introductions
Control knob
Click the control knob:
Switch AUX mode/Bluetooth mode
Rotate the control knob:
- Volume adjustment
- LED light brightness adjustment
Touch button
Tap the touch button: Switch LED light colors.
LED light
The Light Pattern
- Default light mode: Blue light flashes slow.
- Bluetooth connected mode: Blue light always on.
- Light switch sequence: Blue, red, green,breathing(no music playing)/streaming (music playing), colorful, lights off
- Rotate the control knob: light brighter / dimmer
Setting up your speakers
- Connect the 3.5mm AUX audio cable and the USB cable of your speakers to your music device. Also,you can connect the USB cable to a compatible AC-charger(not included), desktop or laptop USB port.
- You can adjust the speakers appropriately (can be used together or separately) for a better stereo effect.
Connecting Audio Sources
AUX Mode
- Use the 3.5mm AUX audio cable to connect your audio source components to your speakers. The speakers will be switched in AUX-in mode automatically once the 3.5mm AUX audio cable being inserted.
- Switched on the speakers by connect the USB cable to the desktop USB port, the LED light will turn on once connected,and Voice will prompt:“AUX mode”.
- Now enjoy your music time. The music will be controlled via your music player with the volume being adjusted on the speaker’s volume button.
Note: -The handsfree function is not available in AUX mode.
Bluetooth Mode
- Switched on the speakers by connect the USB cable to the desktop USB port, the LED light will turn on once connected.
- Click the control knob to switch to Bluetooth mode and Voice will prompt:“ Bluetooth mode”.
- Activate the Bluetooth function on your device and paring to“GT Spker1”.
- when connected, voice will promit:”connected”.
- Once the connection is break up,voice will prompt:“Disconnected”.
Note:
- The Bluetooth speakers will only sync with one device at any time, the connection cannot be deleted when matching. It can only be deleted in disconnection mode.
- When playing music on some mobile phones, the music will be transmitted to the mobile phone speaker instead of the portable speaker. You have to select transmit the sound via Bluetooth in the settings menu and then choose GT Spker1 as speaker device. The music will be transmitted to the speakers.
- The AUX mode is not available in Bluetooth mode.
Product specification
- Dimension: 380mm(W) x 75mm(D) x 70mm(H)
- Power Output: 5W x2
- Power Supply: DC 5V 1000mA
- Frequency Response Range: 160Hz-20KHz
- Bluetooth Version: 5.3
- Transmission Distance: <10m
- Audio Source Selection: Bluetooth mode or AUX Mode
- Input Sensibility: 165mv±50mv
Maintenance and Care
Read the following recommendations before using your speakers.
- Do not let small children play this product.
- Do not expose the speakers to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
- Do not use abrasive cleaning solvents to clean the speaker.
- Store the speaker out of direct sunlight and extreme temperatures (above 45°C/113°F or below -10°C/- 14°F), as this may affect the operation or degrade the performance of your speaker.
- Do not dispose of the speaker in a fire as it might result in an explosion.
- Do not expose the speaker to sharp objects as this will cause scratches and damage.
- Do not drop the speaker. This may cause damage to the internal circuitry.
- Do not attempt to disassemble the speaker. This may cause damage to the internal circuitry.
Contact Us:
E-mail : us@gtplayer.com Website :
www.gtplayer.com
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>