GTplayer GESD-01-140 Gaming Desk Instruction Manual

October 30, 2023
GTPLAYER

GTplayer GESD-01-140 Gaming Desk Instruction Manual
GTplayer GESD-01-140 Gaming Desk

Details of accessories

Details of accessories

Details of accessories
Details of accessories

Desk Installation

  1. Unfold Ⓑ and secure with ➊. Install Ⓑ on Ⓐ with ➊.
    Desk Installation

  2. Unfold Ⓒ and secure with ➊. Install Ⓒ on Ⓐ with ➊.
    Desk Installation

  3. Install Ⓖ on Ⓓ and Ⓚ on Ⓓ. Install Ⓓ and Ⓠ on Ⓐ with ➋ and ➎. Install Ⓖ on Ⓑ with ➊,and then tighten all the screws.
    Desk Installation

  4. Install Ⓕ on Ⓐ with ➊.
    Desk Installation

  5. Install Ⓟ on Ⓔ. Then install Ⓔ on Ⓐ with ➌.
    Desk Installation

  6. Attach Ⓗ to Ⓘ with Ⓢ and ➍. Install Ⓙ on Ⓗ and Ⓘ with ➍. Install Ⓞ and Ⓣ with ➍.
    Desk Installation

  7. Install Ⓕ, Ⓑ and Ⓒon Ⓗ and Ⓘ with ➍, Ⓖ to Ⓗ with ➍. Use Ⓜ to organize the cables.
    Desk Installation

  8. Put on Ⓤ, and then install Ⓝ. Complete.

Function Display

Function Display
Function Display

: UP : Stand Memory Button
RESET: RESET
: DOWN : Sit Memory Button
  1. Up and Down Operation
    Press and hold the button “ ” or “ ” for 3s and release the button, and the desk will automatically run to the highest or lowest position. Press any button to stop at the desired height.

  2. Set Memory Height
    Adjust to a desired height, press and hold the button “ ” or “ ” for about 5s, and the current  height is memorized.

  3. Call Memory Height
    Press the button “ ” or “ ” to adjust to the corresponding memory height.

  4. Restore Initial Settings
    Press and hold the button “ RESET ” for about 3s, and the desk enters reset mode. It will automatically run from the lowest position to the highest. After a 3s pause, the desk will automatically run to an initial height, and the desk is restored to its initial settings.

NOTE: The desk must be reset after leveling ! The against uncontrolled movement protection is deactivated during resetting. Make sure there are no objects under the desk!

Technical parameters

Input: AC100-240V Using temperature range: -10~40℃
Working frequency: 50/60HZ Maximum Loading: 60KG

SAFETY INSTRUCTIONS

Please observe the safety instructions! Improper operation of the system may result  in personal injury and cause damage to objects!

  • Unplug the power cord in case of smoke, smell, or unusual noise.
  • Make sure no objects or parts of the body get caught when operating the motor.
  • Do not place any objects or parts of the body between fixed or movable parts.
  • Height adjustment is only possible in jog mode. If an obstacle is encountered or if there is a functional fault, stop the adjustment immediately.
  • Make sure adjacent objects are placed at a minimum distance of 25 mm to prevent them from being squeezed or sheared.
  • The against uncontrolled movement protection does not prevent objects from being trapped!
  • In case of hitting an obstacle, slight damage (scratching) to such obstacles may result (desk is lifted at nominal speed).
  • Do not change or modify the controller or the operating device.
  • Never open the enclosure of the control unit or power supply. Unauthorized opening of the enclosure or improper repairs may endanger the user and voids all warranty claims.
  • Only professionals authorized by the manufacturer may do maintenance or repair any electrical equipment.
  • This appliance must not be used by any children. Children should be supervised in order to make sure that they do not play with the appliance.
  • The manufacturer assumes no liability for damage resulting from improper use.
  • Connection plug boards must be fixed properly for easy plugging and unplugging. Plugs and connection plug boards must be located in such a way that no fluids come into contact with electrical equipment when the office furniture is used properly.
  • The power cable must be secured in the strain relief of the leg frame. Interconnecting cables may be run loosely.
  • Desks with flexible or height-adjustable worktops require special care. Cables must be sufficiently long to allow height adjustments without damaging the cables.
  • If the power cord of this equipment is damaged, it must be replaced by the manufacturer, their customer service, or a similarly qualified person so as to avoid any risk.
  • Do not spill liquids into the control unit or power supply unit, as this could cause electrical shock or short circuits.
  • The operation of the control mechanism and the power supply unit requires a minimum of -10°C and a maximum temperature of 40°C.

Warning: In the event of a fault it is possible that the desktop moves a bit during every attempt whilst operating before the safety switch-off kicks in. Please take care to avoid the possible danger of crushing.

  • After 2 min of continuous operation, the system automatically shuts itself off and cannot be used for an additional 18 min. Keeps the motor from overheating.

Dear Customer,
Thank you for choosing us. Has been implementing its brand and design concept “BE COOL BE FREE”, GTPLAYER is dedicated to enriching gaming and shopping experience for customers. For safe use, please read this manual before installation, and keep it for after use. Please feel free to email us if you have any concerns about our products. We‛ll reply within 24 hours. The following are the things you need to pay attention to so that we can provide you with services when you encounter problems during the installation and use of the product:

  • When the product is damaged due to courier problems, please contact our customer service in time for verification.
  • We will rectify the issue as soon as possible;
  • We give a 365-day quality assurance;
  • We provide a 7-day no-reason return service ( Note that the returned product will not affect the secondary sales)

We offer product explanations, installation instructions, product maintenance and maintenance methods.

If you feel satisfied with our product and service,

  • Please set our store as your favorites;
  • Please recommend our products to your friends;
  • Please leave us your purchase experience in our store or product page.

Feedback or reviews from you will greatly help us offer better services to players around the world.

Best regards!

  • ATTENTION! During installation, DO NOT tighten all the screws completely until all the screws are fixed in the correct position.

E-mail: us@gtplayer.com
www.gtplayer.com

READ THIS MANUAL
Do not use this product until you read and understand the instructions in this manual. KEE P   THIS MANUAL FOR FUTURE REFERENCE.

GTplayer Logo

Documents / Resources

| GTplayer GESD-01-140 Gaming Desk [pdf] Instruction Manual
GESD-01-140 Gaming Desk, GESD-01-140, Gaming Desk, Desk
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals