GTPLAYER GT Spker 2 Bluetooth Speaker User Manual
- June 3, 2024
- GTPLAYER
Table of Contents
Bluetooth Speaker
User Manual
GT Spker 2 Bluetooth Speaker
READ THIS MANUAL
Do not use this product until you read and understand the instructions in this
manual.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
Package components
Speaker(Main) | x1pc | Speaker(Sub) | x1pc |
---|---|---|---|
USB Cable | x1pc | 3.5mm AUX audio cable | x1pc |
Maintenance and Care
Read the following recommendations before using your speakers.
- Do not let small children play this product.
- Do not expose the speakers to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
- Do not use abrasive cleaning solvents to clean the speaker.
- Store the speaker out of direct sunlight and extreme temperatures (above 45°C/113°F or below -10°C/- 14°F), as this may affect the operation or degrade the performance of your speaker.
- Do not dispose of the speaker in a fire as it might result in an explosion.
- Do not expose the speaker to sharp objects as this will cause scratches and damage.
- Do not drop the speaker. This may cause damage to the internal circuitry.
- Do not attempt to disassemble the speaker. This may cause damage to the internal circuitry.
Setting up your speakers
Connect the 3.5mm AUX audio cable and the USB cable of your speakers to your music device. Also,you can connect the USB cable to a compatible AC- charger(not included), desktop or laptop USB port.
Connecting Audio Sources
-AUX Mode
- Use the 3.5mm AUX audio cable to connect your audio source components to your speakers. The speakers will be switched in AUX-in mode automatically once the 3.5mm AUX audio cable being inserted.
- Switched on the speakers by connect the USB cable to the desktop USB port, the LED light will turn on once connected.
- Now enjoy your music time. The music will be controlled via your music player with the volume being adjusted on the speaker’s volume button. Adjust the volume and the brightness of the LED lights will also change
- Note: -The handsfree function is not available in AUX mode.
-Bluetooth Mode
- Switched on the speakers by connect the USB cable to the desktop USB port, the LED light will turn on once connected.
- Click the button, the Speakers enter Bluetooth mode and vioce promits:”Bluetooth Mode”.
- Activate the Bluetooth function on your device and pair to“GT Spker2”.
- when connected,voice promits:”connected”.
- Plug the GTplayer Bluetooth adapter[ GT-Lycnk] (seperate purchase from our store) into a computer USB port. When the adapter blue light is always on and the speakers prompt “Connected”, the connection is complete.
* Note:
- The Bluetooth speakers will only sync with one device at any time, the connection cannot be deleted when matching. It can only be deleted in disconnection mode.
- A Bluetooth connection list cannot have two devices at the same time.
- When playing music on some mobile phones, the music will be transmitted to the mobile phone’s speaker instead of the portable speaker. You have to select “transmit the sound via Bluetooth” in the settings menu and then choose “GT Spker2” as speaker device. The music will be transmitted to the speaker.
- The AUX mode is not available in bluetooth mode.
The Light Pattern
Default light mode | : Blue light flashes slow. |
---|---|
Bluetooth connected mode | : Blue light always on. |
Light switch sequence | : Blue, red, green, breathing/streaming (breathing–no |
music playing, streaming –music playing),
colorful, lights off
Function 1| : Volume adjustment knob (light brighter/dimmer) Volume up/
down
Function 2| : Double click to switch audio mode
Function 3| : Click to switch light mode
Product Specification
Dimension | : 78mm(W) x 99mm(D) x 175mm(H) |
---|---|
Power Output | : 3W x2 |
Power Supply | : DC 5V 1000mA |
Frequency Response Range | : 160Hz-20KHz |
Bluetooth Version | : 5.3 |
Transmission Distance | : ≤10m |
Audio Source Selection | : Bluetooth or AUX-in Mode |
Input Sensibility | : 165mv±50mv |
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Thank you for buying our product, if you encounter product problems,
please contact us:
E-Mail :us@gtplayer.com
Web Address :www.gtplayer.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>