GTPLAYER EU-GT505-KD Gaming Chair Instruction Manual

Table of Contents

GTPLAYER EU-GT505-KD Gaming Chair
1

Instructions Before Using

Place the chair base upside down. Insert the tip of the part G) into 62 and fix with M6*20 Screws.
Insert the casters into the bottom of the base. Install gas lift and insert gas lift cover.
Install the mechanism and armrests.
Place the seat on the gas lift
Align f&m with the holes of seat, then tighten the screws.
Align f&m with the holes of back, then tighten all screws
Put M5*8 screw through the hole of & 2 and tighten, then put the cap on.
Install &with M5*8 screw, then put the cap on.
Attach the headrest & lumbar pillow.

Frequently Asked Questions:

Q:Why do I hear a creaking sound after using it for a period of time?
- A: The mechanism may not fit the seat base. If you hear a creaking sound, please remove the mechanism and reassemble again. Please ensure all the screws are securely tightened.

Place the chair base upside down. Insert the tip of the part J1 into J2 and fix with M6*20 screws.
Insert the casters into the bottom of the base. Install gas lift and insert gas lift cover.
Install the mechanism, armrests and footrest connector.
Place the seat on the gas lift.
Alignf &m with the holes of seat, then tighten the screws.(Attention: Screw 50% tight)
Alignf &m with the holes of back, then tighten the screws. (Attention: Tighten all the screws completely until them are fixed in the Correct position.)
Put M58 screw through the hole of R1&R1 and tighten, then put the cap on.
Put M5* 8 screw through the hole of L1& L2 and tighten, then put the cap on.
Attach the headrest & lumbar pillow.

Package contents

Lift up the button on the side of the arm to adjust the arm height, raise or lower to the desired position.
Lift the handle to recline and release it to any desired position. Rest on the backrest when resetting back to its normal position, otherwise, the backrest may rebound rapidly.
Pull upward on lever to achieve height adjustment. (2) Push into the lock, and pull out to unlock the tilt of the chair.
Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it clockwise to decrease the angle, and counterclockwise to increase the angle.
Lift up the button on the side of the arm to adjust the arm height, raise A or lower to the desired position.
Lift the handle to recline and release it to any desired position. Rest on Bthe backrest when resetting back to its normal position, otherwise, the backrest may rebound rapidly.
Pull upward on lever to achieve height Height Adjustment adjustment.
Push in to lock, pull out to unlock the tilt of the chair. 2 Tilt Function
Adjust the tilt angle with the tilt-tension knob underneath the seat. Turn it clockwise to decrease the angle, and counterclockwise to increase the angle.