GTPLAYER ACE-S1 Ergonomic Gaming Chair Instruction Manual

: June 4, 2024
: GTPLAYER

Table of Contents

ACE-S1 Ergonomic Gaming Chair
Accessory Details
Instructions Before Using Chair Installation
Frequently Asked Questions:
Technique Speciﬁcation
Documents / Resources

ASSEMBLY INSTRUCTIONS

ACE-S1 Ergonomic Gaming Chair

READ THIS MANUAL
Do not use this product until you read and understand the instructions in this manual.
KEEP THIS MANUAL FOR FUTURE REFERENCE.

This manual is intended for installation and use. The pattern should be subject to the product you receive.

Check All the Accessories

Accessory Details

Please check and ensure all the things are in the package.

＊ Note: Accessories W1+W2 are in the side pocket of the seat. Check whether they are all available before use. Please charge W1 before use. Also, for safe use, please read this
manual and use it correctly.

Screws and Caps

Instructions Before Using Chair Installation

Please keep the original box in case you might need to return or replace the product.

Combine i2 and i1 with t （2pcs）screws.
Insert the casters. Install the gas lift and insert the gas lift cover.
Install the mechanism and footrest rails.
Attention DO NOT tighten all the screws completely until they are fixed in the correct position.
Place the seat on the gas lift.
Install the connector on the chair back .
Install the connector on the rear end of the mechanism.
Install the armrests.
Attention DO NOT tighten all the screws completely until they are fixed in the correct position.
Attach the headrest and lumbar pillow. Install the footrest.

After installing the footrest, put the rubber rings s into the metal grooves.

Frequently Asked Questions:

Q: Why do the armrests loosen after a period of use?

– A: In most cases, the screws of the armrests and back become loose after a period of use, and re-tightening the screws can fix the problem.

Instructions For Use Functions Display

A Height Adjustment

Lift up the “LIFT” lever to adjust the height of the chair， and release the “LIFT” lever at the desired height. Lift the body slightly on the seat when adjusting the height.

B To operate back recline function

Pull up on the “RCL” lever and the back angle tilts independently with the user’s motion. Push down on the “RCL” lever and the back angle is locked in position. Rest on the back when resetting back to its normal position, otherwise, the back may rebound rapidly.

C Bluetooth Receiver User Manual

This device can play audio through Bluetooth function.
When hearing a click, the cables are properly connected in place.

Note: Please ensure that all audio jacks in AREA 1 and AREA 2 are properly connected in place, otherwise one side of the Bluetooth speakers may not sound.

Contents
BASIC OPERATION
⑴. Charging

Charge the Bluetooth receiver W1 with Type-C charging cable or battery charger (Not included) for about 90 min, and it will be fully charged. The LED indicator light W2 ﬂashes blue when charging, and 4 blue lights are always on when fully charged. (There are 4 blue lights in total, and one blue light represents 25% battery.)
＊ Note: This Bluetooth receiverW1 cannot be used when it is charging.

⑵.Pair and Connect

Connecting to smartphones and other devices:

Long press the multi-function button ① for 2s to turn on the Bluetooth receiver w1. The LED indicator light ﬂashes red and blue , and the voice will prompt “POWER ON”.
Activate the Bluetooth function on your phone and search for Bluetooth devices. Pair your phone with “GTPLAYER”.
After successful pairing, the voice will prompt “Connected”.
If the connection is broken, the voice will prompt “Disconnected”.
If there is no connection, the Bluetooth receiver w1 will automatically turn oﬀ after 5 min.
After the connection, the blue light will light up. After a period of time, it will enter the energy-saving mode, and only one blue light will be on for a long time.

⑶. Instructions for Multi-function Button

Power On — Long press the multi-function button ① for 2s to turn on the Bluetooth receiver w1 and the voice will prompt “POWER ON”.
Power Oﬀ — Long press the multi-function button ① again for 5s to turn oﬀ the Bluetooth receiver and the voice will prompt “POWER OFF”.
Connect Bluetooth Reciver to the Bluetooth speakers, now you can enjoy music wirelessly.
3.1). The music automatically pauses when you dial a phone number or receive an incoming call.
3.2). This Bluetooth music receiver doesn’t have a microphone, so you need to switch the call to
the mobile phone. The music will automatically play when the call is ended.
Play Music — Short press the multi-function button once to play music.
Pause Music — Short press multi-function button once to pause when playing music.
Click the multi-function button ① to check the remaining battery.

⑷. Bluetooth Receiver Indicator Reference

[ Left 1 light: ﬂashing red and blue ] — Bluetooth pairing
[ Left 1 light: blue light always on ] — Bluetooth connected
[ Left 1 light: ﬂashing blue ] — Charging

Technique Speciﬁcation

Power Input	USB 5V	Working Frequency	2.402 ~ 2.483ghz
Output Voltage	3.8V	Working Time	7-8 H
Battery Capacity	1000mAh	Wireless Streaming Range Distance	10~15m（No

occlusion）
Charging Time| 90 min| Support Mobile System| Android / iOS

GAIN A COMPLETE INTERCONNECTED EXPERIENCE

？？No Bluetooth transmission function in your device？ We recommend
「USB Bluetooth Transmitter “GT Lynck”」!
Compatible with 「Nintendo Switch, Windows7/8/10/11, PlayStation4/5」, and other devices to enjoy games, music, and movies, “GT Lynck” can be used in a high- quality wireless sound environment. Want to own this product? Please check the “GT Lynch” product information in GTRACING store.

Dear Customer,

Thank you for choosing us.
Has been implementing its brand and design concept “BE COOL BE FREE”, GTPLAYER is dedicated to enriching the gaming and shopping experience for customers.
For safe use, please read this manual before installation, and keep it for after use. Please feel free to email us if you have any concerns about our products. We‛ll reply within 24 hours.
The following are the things you need to pay attention to so that we can provide you with services when you encounter problems during the installation and use of the product:

When the product is damaged due to courier problems, please contact our customer service in time for verification.
We will rectify the issue as soon as possible;
We give a 365-day quality assurance;
We provide a 7-day no-reason return service ( Note that the returned product will not aﬀect the secondary sales).
We oﬀer product explanations, installation instructions, product maintenance, and maintenance methods.
If you feel satisﬁed with our product and service,
Please set our store as your favorites;
Please recommend our products to your friends;
Please leave us your purchase experience in our store or product page.
Feedback or reviews from you will greatly help us oﬀer better services to players around the world.
Best regards！