REENEO Outdoor Waterproof Solar Motion Lights User Manual
- June 1, 2024
- REENEO
Table of Contents
REENEO Outdoor Waterproof Solar Motion Lights User Manual
Product Overview
Thank you for purchasing the NEOPRENE solar motion sensor light, we hope you enjoy your solar lighting solution. To ensure proper operation of this solar light, please read this user manual carefully and keep it for future reference.
Package List
- Solar Motion Sensor Light *2
- User Manual *1
- Screw accessories *4
- Double-sided sticker *4
Specifications
| Model | RS03/10 |
|---|---|
| Output | 5.5v.2w |
| Battery capacity | 2200mAh |
| Angle of the sensor | 120° |
| Induction distance | 3-5m |
| Brightness | 2500lm |
| LED Quantity | 266pcs |
Features
The product has 3 lighting modes. Before use & installation, press and hold
the ON/OFF button 5s to activate and turn on the solar light to mode 1 ,
and then press ON/OFF button once or twice to switch to mode 2 or mode
3, select your lighting mode.
Mode 1: Human body induction mode(the light turns on when people pass,
turns off 15-20 seconds after people leave).
Mode 2 : Human body induction slight light mode(the light turns on high
light when people pass, turns on slight light 15-20 seconds after people
leave).
Mode 3 : Slight light mode(The light is always slightly light at night,
whether there is anyone or not).
Note: After receiving solar light, please expose the solar light directly to the sun for 6-8 hours to charge. If there is a sun or other light on the solar panel, the light will not light even if the ON/OFF button is turned on. You can use something else such as your hand to cover the solar panel to test if the solar light is working.
Easy to Install
The light has 3 installation methods, you can choose the appropriate
installation method according to the location of your installation, and ensure
that the installation place is full of sun light, the Angle of the solar light
can fully accept the direct sunlight, the best Angle of the installation is
3m.
Method 1: Hold the device in place with the supplied screw fittings
Method 2: Hold the device in place with the supplied double-sided tape
Method 3: Hold the device in place with ropes (Not equipped)
Precautions
- The product cannot replace the battery, and after the power is exhausted, the solar panel can charge the battery after receiving sufficient sunlight.
- During the first use of the product, place the product in a place with sufficient sunlight for charging, the product should be used after being charged for several hours.
- When the product will not be used for a long time, please place the product in a place with sufficient sunlight, too, the charging time is 1 day. For keeping the function of the battery, you’d better comprehend- lively charge the product in a place with sufficient sunlight for once a month.
- The charging time and charging efficiency of the solar panel may be affected by the weather and the installation position. If the product is used with good weather, it will gain higher charging efficiency and effectiveness.
- The solar light should be installed in the place with sufficient light to ensure the solar panel will absorb sunlight sufficiently, so that the working hour of the solar light will be prolonged.
- During winter or when the sunshine duration is short, it is suggested using the solar lamp under mode 1
SOLAR MOTION SENSOR LIGHT
Service for You
If you have product quality problems or use problems to seek solutions, you
can also contact us through the following ways, we will give you a
satisfactory solution.
www.amazon.com/reeneo
service@reeneo.com
