GTPLAYER S07DTL4ITX Gaming Chair Instruction Manual

GTPLAYER S07DTL4ITX Gaming Chair

Assembly Instruction

READ THIS MANUAL
Do not use this product until you read and understand the instructions in this manual.
KEEP THIS MANUAL FOR FUTURE REFERENCE.

This manual is intended for installation and use. The pattern should be subject to the product you receive.
E-mail: [email protected]
www.gtplayer.com

Accessory Details

Please check and ensure all the things are in the package.

Screw and Caps

＊ Note: Accessories W1+W2 are in the side pocket of the seat. Check whether they are all available before use. Please charge W1 before use. Also, for safe use, please read this manual and use it correctly.

Chair installtion

1. Combine j2 and j1 with t （5pcs） screws.

2. Insert the casters. Install the gas lift and insert the gas lift cover.

3. Install the mechanism， armrests and footrest rails.

4. Place the seat on the gas lift.
   DO NOT tighten all the screws completely until they are fixed in the correct position.

5. Install f & m on the seat and back. DO NOT tighten all the screws completely until they are fixed in the correct position.

6. Put M5*8 screws through the holes of & and tighten them, and then put the caps on.

7. Install & with M5*8 screws, and then put the caps on.

8. Attach the headrest and lumbar pillow.

9. Install the footrest on the footrest rails.

Frequently Asked Questions

Q: Why do I hear a creaking sound after using this chair for a period of time?
A: Check where the noise comes from.

• Disassemble the mechanism, and then reinstall it with the screws tightened;
• Tighten the 8 screws of the angle adjustor and connector.

Function Display

Lift the tilt angle adjustor to recline and release it to any desired position. Lean on back when resetting back to its normal position to prevent hurts from excessive rebound strength of the chair.

• Bluetooth Receiver User Manual

This chair can play audio through Bluetooth function

Note: Please ensure that all audio jacks in the AREA 1 and AREA 2 are properly connected in place, otherwise one side of the bluetooth speakers may not sound.

When hearing a click, the cables are properly connected in place.

Content

BASIC OPERATION

• Charging

Charge the Bluetooth receiver with Type-C charging cable or battery charger (Not included)  for about 90 min, and it will be fully charged. The LED indicator light ② flashes blue ● when charging, and 4 blue lights ● ● ● ● are always on when fully charged . (There are 4 blue lights in total, and one blue light represents 25% battery.)
＊ Note: This Bluetooth receiver cannot be used when it is charging.

• Pair and Connect

Connecting to smartphones and other devices:

1. Long press the multi-function button ① for 2s to turn on the Bluetooth receiver . The LED  indicator light flashes red and blue ● ● , and the voice will prompt “POWER ON”.
2. Activate the Bluetooth function on your phone and search for Bluetooth devices. Pair your phone to “GTPLAYER”.
3. After successful pairing, voice will prompt “Connected”.
4. If the connection is broken, voice will prompt “Disconnected”.
5. If there is no connection, the Bluetooth receiver will automatically turn off after 5 min.
6. After connection, the blue light ● will light up. After a period of time, it will enter the energy
   • saving mode and only one blue light ● will be on for a long time.
     

• Instructions of Multi-function Button

1. Power On — Long press the multi-function button ① for 2s to turn on the Bluetooth receiver  and the voice will prompt “POWER ON”.

2. Power Off — Long press the multi-function button ① again for 5s to turn off the Bluetooth and the voice will prompt “POWER OFF”.

3. Connect Bluetooth Reciver to the Bluetooth speakers, now you can enjoy music wirelessly.

   • The music automatically pauses when you dial a phone number or receive an incoming call.
   • This Bluetooth music receiver doesn’t have a microphone, so you need to switch the call to the mobile phone. The music will automatically play when the call is ended.

4. Play Music — Short press multi-function button once to play music.
   Pause Music — Short press multi-function button once to pause when playing music.

5. Click the multi-function button ① to check the remaining battery.

Bluetooth Receiver Indicator Reference

• [ Left 1 light: flashing red and blue ● ● ] — Bluetooth pairing
• [ Left 1 light: blue light always on ● ] — Bluetooth connected
• [ Left 1 light: flashing blue ● ] — Charging

Technique Specification

Power Input| USB 5V| Working Frequency| 2.402 ~ 2.483ghz
---|---|---|---
Output Voltage| 3.8V| Working Time| 7-8 H
Battery Capacity| 1000mAh| Wireless Streaming Range Distance| 10~15m （No occlusion）
Charging Time| 90 min| Support Mobile System| Android / iOS

GAIN A COMPLETE INTERCONNECTED EXPERIENCE

No Bluetooth transmission function in your device？We recommend
「USB Bluetooth Transmitter “GT Lynck”」!
Compatible with 「Nintendo Switch, Windows7/8/10/11, PlayStation4/5」 and other devices to enjoy games, music and movies, “GT Lynck” can be used in a high- quality wireless sound environment. Want to own this product? Please check the “GT Lynck” product information in GTRACING store.

Dear Customer,
Thank you for choosing us.
Has been implementing its brand and design concept “BE COOL BE FREE”, GTPLAYER is dedicated  to enriching gaming and shopping experience for customers.
For safe use, please read this manual before installation, and keep it for after use. Please feel free to  email us if you have any concerns about our products. We‛ll reply within 24 hours.
The following are the things you need to pay attention to so that we can provide you with services when you encounter problems during the installation and use of the product:

• When the product is damaged due to courier problems, please contact our customer service in time for verifcation.
• We will rectify the issue as soon as possible;
• We give a 365-day quality assurance;
• We provide a 7-day no-reason return service ( Note that the returned product will not affect the secondary sales).

We offer product explanations, installation instructions, product maintenance and maintenance  methods.
If you feel satisfied with our product and service,

• Please set our store as your favorites;
• Please recommend our products to your friends;
• Please and leave us your purchase experience in our store or product page.

Feedback or reviews from you will greatly help us offer better services to players around the  world.
Best regards！
＊ ATTENTION! During installation, DO NOT tighten all the screws completely until all the screws are fixed in the correct position.

E-mail: [email protected]
www.gtracing.com

References

• Best Gaming Chairs——GTPLAYER – GTPLAYER EU
• The Best Gaming Chairs– GTRACING Gaming Chair

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>