gingko CV8 Smart Galaxy Lamp User Manual
- June 5, 2024
- Gingko
Table of Contents
gingko CV8 Smart Galaxy Lamp
Thank you for your purchase of the Original Gingko Smart Galaxy Lamp. Please read the instruction manual carefully to achieve the best performance of this product.
The 3D Printed Galaxy
The Magnetic suspension wood base
Cork base mat
DC Transformer Plug Adaptor
Instruction Manual
NOTE
PATIENCE IS KEY TO SETTING UP THIS PRODUCT AND YOU MAY NEED TO TRY IT A FEW TIMES BEFORE YOU CAN SUCCESSFULLY LEVITATE THE ‘MOON’
Product Set-Up / Installation
Please follow the below steps closely to set up the Smart Galaxy Lamp
-
Step 1: Place the magnetic suspension wood base on the stable, flat and levelled table
surface. -
Step 2: Connect the DC adapter to the Magnetic Suspension Wood base and plug it into the wall socket; switch on the power on the socket.
-
Step 3: It’s recommended to place the cork mat on top of the wood base, to protect the wood surface in case the Galaxy falls down by strong magnet force during the set-up attempts.
-
Step 4: Hold the Galaxy with both hands as per the below diagram and the centre bottom of the Galaxy MUST BE aligned with the engraved centre circle mark on the base or the mat; Gently place down the Galaxy to the base till 15-20 mm gap between the galaxy and base, and you should feel an upward force from the base to suspend the Galaxy with the Galaxy light staying on at the same time. While the Galaxy light stays on and doesn’t flicker anymore, at the same time you feel an upward force from the base to suspend the Galaxy, then you can slowly release your hands and the Galaxy should be successfully levitated.
-
Step 4: While the Galaxy light stays on and doesn’t flicker anymore, at the same time you feel an upward force from the base to suspend the Galaxy, then you can slowly release your hands and the Galaxy should be successfully levitated.
NOTE
When you feel a force pulling the Galaxy in a different direction other than upwards and the light flickers at the same time, the set-up will fail. Then you need to correct the direction and try again. Patience is key here as you may have to try a few times before you can successfully set it up. The Galaxy should also slowly rotate itself.
Precaution
There is a temperature controller built inside the base and in unlikely events such as the Galaxy lamp failing to levitate after more than 30 minutes of trying by the user, the base temperature may reach 55 degrees or more. Then the temperature controller will turn on to cut off the internal power supply of the base to ensure the safety of the base. In such a case, unplug the power and wait for 10-20 minutes for the base to cool down before attempting to levitate the Galaxy again.
IMPORTANT
- Please ensure that the product is placed on a safe and stable desktop with no other metal objects near the product as they may interfere with the magnetic field.
- Please do not place this product in a humid environment such as a bathroom etc.
- Please place any electronic products at least 20cm away from the magnetic base; the electronic products include computers, mobile phones, cameras, bank cards, etc.
- This product is not recommended or suitable for any people with heart disease.
- This product is not a toy and is not suitable for children under 12 years old.
- This product is for indoor use only.
- You may find it a little bit challenging to levitate the Galaxy for the first time. Please seek help from others if you still can’t set it up after a few attempts.
Warranty & Product care
- Please ensure that the product is placed on a safe and stable desktop with no other metal objects near the product as it may interfere with the magnetic field.
- Please do not place this product in a humid environment such as a bathroom etc.
- Please place any electronic products at least 20cm away from the magnetic base; the electronic products include computers, mobile phones, cameras, bank cards, etc.
- This product is not recommended or suitable for any people with heart disease.
- This product is not a toy and is not suitable for children under 12 years old.
- This product is for indoor use only.
- You may find it a little bit challenging to levitate the Galaxy for the first time. Please seek help from others if you still can’t set it up after a few attempts.
Product
- The product base is made from natural wood, any natural wood grain on the wood base is not a product fault.
- Any drop of this product could cause serious damage to the device.
- You can use tissue or a damp cloth to clean the Galaxy or the wood base when it’s not in use.
- For 1st time set-up you need to be very patient If you still can’t levitate the galaxy after a few attempts, please seek help from others before returning it.
- Do not expose this product to any strong direct sunlight.
If you still have any queries or need any further assistance, please email us atsupport@gingkodesign.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>