Brook Pocket ZPP005Z Auto Catch Watchic Plus Instruction Manual
- June 15, 2024
- Brook Pocket
Table of Contents
Charging Your Watchic Plus
The Watches Plus has a built-in USB charging connector. You can directly charge it while connecting the built-in USB charging connector into USB cable or power source. It takes 1.5 hours to be fully charged.
Note: Check that the Watches Plus is inserted into the USB port of the power source the correct way up. Even though it goes into the USB port both ways – the animation screen will only appear when inserted in the correct orientation. Only when the charging animation is displayed, is your Watched Plus actually charging.
-
Remove it at 45-degree angle
-
Connect to a power supply with a USB port.
-
Check forcharging animation.
-
Reconnect it at 45-degree angle.
Ensure that your Watchic Plus has the latest firmware
Download 【Pocket Center】 to change the settings for enhancing Watchic Plus
experience. Scan QR code to open the store main page for 【Pocket Center】 in
Apple Store or Google Play. Also, search for 【Pocket Center】 in App Store
directly.
Watchic Plus needs to be connected to “Pocket Center”. The button on Watchic Plus should be pressed to wake up the device. It will automatically connect to the opened 【Pocket Center】 and download the updates.
Time Calibration：
When Watchic Plus is connected to 【Pocket Center】, the date and time on
Watchic Plus will be automatically updated by 【Pocket Center】
Pair Pocket Auto Watchic with your phone.
-
Turn on your mobile Bluetooth.
-
Launch the Map View of 【Pokémon Go】. Tap the Main Menu button.
-
Tap Settings at the top right.
-
Select 6. 【Pokémon Go Plus】 in settings page.
-
Tap the button on Pocket Auto Watchic to make it show on the device list, and select 【Pokémon Go Plus】 from available devices.
-
Waiting for pairing. When 【Pokémon Go Plus】 icon turns on, it means the pairing is completed.
How to change display style
- Long press button in main screen to enter “change display style” mode.
- Briefly press button to select desired display style.
- Long press button again to complete setup and return to main screen.
Having difficulties with pairing?
When your Watchic Plus has been paired to other devices, out of power or not functioning that fail to be paired to your current device.
- Go to Bluetooth in Settings on the phone to remove/clear Pokémon Go Plus.
- Go to the Settings in the game, exit/clear Pokémon Go Plus.
- Then tap the button on Watchic Plus. When it pops up a new Pokémon Go Plus in the settings in the game, select it for re-pairing
How to change the mode
- Touch the button to switch between modes.
- Long press the button for 3 seconds to turn ON / turn OFF that mode.
Auto-catch ON
Auto-catch OFF
Auto-catch new Pokémon ONLY ON
Auto-catch new Pokémon ONLY OFF
New Pokémon discovered
Duplicate Pokémon found
Waiting
Pokémon caugh
Pokémon not caught
Auto-collect Pokéstop ON
Auto-collect Pokéstop OFF
Pokéstop in range
Pokéstop not in range
Pokéstop items collected
Pokéstop items collected
Pokéstop items collected
Pokéstop items collected
Pokéstop items collected
Vibration alerts ON
Vibration alerts OFF
Device pairing paired
Device pairing not paired
Out of Pokéballs
Pokémon is full
Bag full
Disconnect Vibration ON
Disconnect Vibration OF
Disconnect
Power Saving Mode ON
Power Saving Mode OFF
Update Ready
Updating
Update Complete
Charging
Power off
Important
Watchic Plus will time out automatically every hour. Players have to re- connect it.
How to Check Safety Regulation Information?
To check “Safety Regulation Information” screen, long press the button on Watchic Plus when it shows “Brook” logo.In “Safety Regulation Information” screen, press the button again to return to the menu.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2ADKM005Z
P/N: Pocket Auto Catch Watchic Plus
M/N : ZPP005Z
For more details please visit our ocial website at.
www.brookaccessory.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>