CONTROLOMATIC Spa and Hot Tub Salt Water Chlorine Generators User Manual
- June 3, 2024
- CONTROLOMATIC
Table of Contents
Spa and Hot Tub Salt Water Chlorine Generators
User Manual
Spa and Hot Tub Salt Water Chlorine Generators
Saltwater purification systems produce small amounts of pure sanitizer derived from natural salt, just enough to purify the water. Salt systems are a desirable alternative to packaged bromine or chlorine and can provide naturally clean, crystal clear, and more pleasant water for bathers. The water actually feels better!
Spa Chlorinator Standard Features
Salt level indication: Low-Normal-High, Operates on a low salt concentration
(1500-2000 PPM)
10 Adjustable power levels, no external timer required to set sanitizer
production level
Input supply voltage: 110 to 220 VAC, low 5.5 Vdc output voltage, 10’ power
cord, 10’ cell cable
Pure chlorination, up to 30 grams per day to accomodate any spa up to 1000
gallons
SmarterSpa
The SmarterSpa is the only system of it’s kind that knows when to turn itself
on. Sanitizer production automatically starts when the sanitizer drops to a
low level!
Replaceable electrode, with sanitizer sensor
External control box for ease of operation
Boost mode for manual control
Chlorine sensor integrated into the electrode
ChlorMaker
The ChlorMaker hangs over the side of the hot tub, into the water, and is very easy to install.
External control box for ease of operation
Boost mode for increased chlorine production
Easy-to-clean cell
3 Buttons and 4 lights for operation
Operates on a 3 hour cycle
MegaChlor Pool and Swim Spa Chlorine Generator
ControlOMatic has taken it’s technological advances and developed a system for
above ground pools, in-ground pools and swim spas.
Salt level indication: Low-Normal-High, Operates on a low salt concentration
(3000-4000 PPM)
10 Adjustable power levels, no external timer required to set sanitizer
production level
Input voltage: 110 to 220 VAC, low 12.5 Vdc output voltage, 10’ power cord,
15’ cell cable
Pure chlorination, up to 110 grams (0.25 lbs) per day to accomodate up to
17,000 gallons
Automatic cleaning – helps reduce calcium build-up
MegaChlor
The MegaChlor’s drape over cell simply hangs over the edge of the pool, into the water, and is very easy to install.
MegaChlor-CD
The CD option replaces the standard electrode with a chlorine detection electrode. The MegaChlor-CD will start a chlorine production cycle when the chlorine is low enough and it will be on based on the power level setting, then it will turn off and wait for the chlorine to drop before turning on again.
Ideal for swim spas and smaller pools
Control box supports both electrode types, auto detection & standard
Adjustable sanitizer threshold