Gingko Atlas Globe Lamp User Manual

Gingko Atlas Globe Lamp User Manual

Thank you for your purchase of the Ginkgo Atlas Globe Lamp. Please read the instruction manual carefully to achieve the best performance of this product.

Product Content

• 1x Atlas Globe Lamp
  

• 1x Wooden Base

• 1x Instruction Manual Booklet

• 1x Magnifier

• 1x Type C USB Cable

Product Operation

1. Place the wooden base on a flat secure surface, and then place the Atlas Globe Lamp on top of the base carefully.

2. Tap once on the touch copper button on the top of the Atlas Globe Lamp to switch the light ON.
   

3. Long tap the button to adjust the light brightness, remove your finger when you have reached the brightness you desire.

4. Quick tap once again on the copper button to turn the light OFF.

Product Charging Instructions

The product usually arrives 70% charge, however, please fully charge it before using for the first time by following the below instruction:

1. Take the USB charging cable out from box.
2. Connect the USB charging cable to any USB plug adaptor with a 5V output i.e. a smartphone charger or a USB port on the computer.
3. Carefully connect it to the charging port on the product. The charging port of the Atlas Globe Lamp is located on the top of the Product.
   
   5V Type C USB charging port and charge indication light.
   Solid Red – Charging;
   Solid Green – Fully Charged

What is the Atlas Globe Lamp Made Of

We care for the environment as much as you and providing something which is sustainably designed and made is also our key product philosophy here at Ginkgo.

The Atlas Globe Lamp is made of natural and sustainably sourced wood and 100% recycled ABS. The wood used on this product may also from recycled source.

Warranty & Product Care

Warranty
This product is covered under one year manufacturer warranty starting from the date of purchase. Within the warranty period, any repair service or components replacement will be provided for free. Warranty does not apply to the following circumstances:

1. Product failure due to improper use, misuse, drops, abuse, alteration, faulty installation, power line surge or modification.
2. Product failure due to acts of nature such as natural disaster, fire, flood, or casualty.
3. Any damage caused to the charging port by user error is not covered by the manufacturer warranty.

Product Care

1. The product is made of natural wood, any natural wood grain on the wood is not a product fault.
2. Heavy drop or misuse of this product could cause damage to the crystal and the wooden exterior.
3. You may use a damp cloth to clean the wooden exterior, however do not have direct contact with water as this product is not water proof.
4. Only use 5V USB charging adaptors (Not included) to charge this product.
5. Please don’t push the button too hard as it is touch sensitive only.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>