gingko Smart Version 3D Moon Lamp User Manual

gingko Smart Version 3D Moon Lamp

Unboxing Check

Thank you for purchasing our products, please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.

Package List:

• Moon Lamp x 1
• Circular Base x 1
• Remote Controller x 1
• USB Cable x 1
• User Manual x 1

Notices:

1. Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
2. This product is LED light and suitable for indoor use and lighting decorations.
3. Connect Bluetooth “BL-YQD0l” of the smart phone to play music.
4. Use the remote control to control the light, make sure the remote control is pointing at the infrared sensor area on the lamp.
5. The lamp body has built-in 2000mAh battery, and the base with built-in 1200mAh battery.
6. When the lamp in low battery, the moon lamp will flash red light for recharge prompt. Red indicator light on when the lamp is charging, and fully charged with green indicator light on; When the circular base are charging, the red indicator light on, and disappear after fully charged.
7. Built-in 15 white noise sounds on the app, you can custom the light you like and choose white noise sound to create various rhythm scenes.
8. The app with body clock function can custom the schedule of product switch on/off to meet the user different demand.

Manual Mode

Lamp Host Buttons Description

1. (D Host Switch On/Off: Control the lamp switch. The default status is warm white light keeps on and in Bluetooth mode

2. Type-C Charging Port (Power Input: SV/800mA)

3. Infrared Sensor Receiving Area (The area that the remote controller pointing at)

4. Lamp Touch Button: Change LED light colors by the following cycle mode:

   • a. Beginning at warm white color, touch it to cycle through: R – G – B – RG – RB – RW – GB – BW – GW
     b. Touch again to enter into single and mixed color cycle mode: R – G – B

   • W- RB – RG – RW – GB – BW – GW

   • c. Final touch to turn off the light

Circular Base Buttons Description

1. (D Infrared Sensor Receiving Area (The area that the remote controller pointing at)
2. Red Indicator Light (Indicator light on when the base charging)
3. Type-C Charging Port (Power Input: SV/S00mA)
4. Base Switch: The base default in static mode, long press to turn on/off the base rotating, short press to adjust the rotating speed with 3 levels: low – medium – high

Remote Control Function Description

1. Power Switch: The default status is warm white light keeps on and in Bluetooth mode
2. Base Switch: The base default in static mode (3 levels on the base button or remote control: low – medium – high). Long press to turn on/off the base rotating, short press to adjust the rotating speed
3. Built-in White Noise: Ocean Wave — White Noise — Summer Night -­Thunder
4. Built-in White Noise: Brook — Lullaby 01– Lullaby 02 — Lullaby 03
5. Press “R”, red light on; Press again, red light off (at basic of light on at first time)
6. Press “G”, green light on; Press again, green light off (at basic of light on at first time)
7. Press “B”, blue light on; Press again, blue light off (at basic of light on at first time)
8. Press “W”, white light on; Press again, white light off (at basic of light on at first time)
9. Pause/ Volume Up/ Volume Down/ Previous Song/ Next Song
10. Spring Light Mode/ Summer Light Mode/ Autumn Light Mode
11. Winter Light Mode/ Four Seasons Light Cycle Mode/ Bluetooth Speaker and White Noise Modes Switch
12. Single Color Cycle Mode/ Mixed Color Cycle Mode/ Brightness Adjustable (4 Levels: 100%-70%-40%- 10%)
13. 1H Timer: the lamp light flash once time as prompting/ 2H Timer: the lamp light flash 2 times as prompting/ Timer Off: the lamp light flash 3 times as prompting

Notice: The circular base with built-in 6 hours automatically shut off the rotation that is working for 6 hours and automatically shut down the base rotating function.

Bluetooth Mode

Bluetooth Setting:

1. Please turn on your phone Bluetooth, or the product won’t be connected

Download the App by scanning the QR code directly

Search “Smart Night Light” App through Google Play(for Android) or APP Store(for Apple-iOS) and download it
Register and log in to the App

1. Turn on “Smart Night Light” App
2. Log in your account and password. Please register a new account on first use

Configuration

Connect the moon lamp with power supply, enter the main interface(fig.1), click “Add Device” to enter “Product Selection” interface(fig.2). Choose the product and enter “Find the Device” interface(fig.3) (Please allow the app to access Bluetooth and previously turn on the Bluetooth. Note: For Android, please also allow to access the location and turn on the location). Power on the device and keep close to the app to identify the device, see the pop-up shown(fig.4), then adding the found device

App Functions

(1) Click “Smart Night Light” icon enter the main interface, touch the to turn on/off the moon lamp. Custom the product name via r.i at the top right-hand corner.

Click icon enter the body clock interface, click “Timer” button to make the device automatically turn on/off. With custom light colors and brightness, white noise sound and volume level, it helps you achieve smart body clock function. (Note: Only choose colour light or white light, 15 white noise sounds for options, click “Preview” at the bottom right to preview the selected effect)

Four Main Interfaces as follows: 1). Colour Light Interface;
White Light Interface; 3). Music Play Interface; 4). Scene Interface CD Colour Light Interface

Features as follows: 1). turn on/off colour light; 2). turn on/off colour light breathing mode; 3). Choose the colour lights; 4). adjust colour light brightness; 5). adjust colour light saturation.

White Light Interface
Features as follows: 1). turn on/off white light; 2). turn on/off white light breathing mode; 3). adjust white light brightness.

Music Play Interface
Features as follows: 1). play/pause the music, switch previous/next song; 2).adjust the volume; 3). Bluetooth speaker and white noise mode switch; 4). built-in white noise sounds.

Scenario Interface
a. Custom Scene Mode: 1). colour light mode, breathe mode switch, adjust brightness, saturation; 2). White light mode, breathe mode switch, adjust brightness; 3). built-in 15 white noise sounds, you can add some white noise sounds you like; 4). choose your custom scenario, click “Preview” to see the selected effect. Once you are satisfied, you can edit and save your rename, convenient to restart your custom scenario effects next time(Only choose colour light or white light).

b. Preset Scenario Mode Selection: click the preset scenario icon, select 6 kinds of scenario effects in the system, or follow the steps above to change the preset scenario effect combination (Available to edit the preset scenario, but cannot delete)

Troubleshooting for Network Configuration – Fail to Connect to Phone Bluetooth

1. Please check your phone Bluetooth access permission and turn on the Bluetooth(For Android, please also allow to access the location and turn on the location).
2. Please check the moon lamp power on and keep close to the connection range(o~1om).
3. Please check your phone app connect to the correct product model.
4. Please check your phone network works normally.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>