Gingko Smart FootballSpin Lamp User Manual

June 1, 2024
Gingko

Gingko Smart FootballSpin Lamp

Product Information

Specifications

  • Product Name: Smart FootballSpin LampTM
  • Contents: 1x Smart FootballSpin Lamp, 1x Magnetic Wooden Charging Base, 1x Remote Control, 1x Instruction Manual Booklet, 1x Type C USB Cable
  • Charging: Type C USB Cable, 5V output adapter required

Product Usage Instructions

Charging Instructions

  1. Take out the USB charging cable and the walnut magnetic charging base.
  2. Connect the USB cable to a 5V output adapter.
  3. Connect the cable to the charging port on the wooden base.
  4. Place the lamp on the magnetic charging base for charging. The lamp will emit a soft red light when charging and turn off when fully charged.

Operation by Remote Control

  • ON – Turn on the lamp.
  • OFF – Turn off the lamp.
  • Spin – Activate or deactivate the spinning function.
  • Brightness Adjustment – Up to brighten, down to dim. Resets to original brightness when turned off.
  • Light Settings – Choose between White, Warm Yellow, or Cool White light.
  • Timer Mode – Set the lamp to turn off after 15, 30, or 60 minutes.

Operation by Touch Mode

  • Quick Tap – Change light setting or activate/deactivate spin function.
  • Long Tap – Adjust brightness. Resets to original brightness when turned off.
  • Quick Tap 3 times – Activate TAP Mode.

You can place the lamp on any hard, flat surface. Note that the light color may change on different surfaces due to vibration.

Frequently Asked Questions (FAQ)

  • Q: Can I use the lamp without the remote control?
    A: Yes, you can use touch mode to operate the lamp without the remote control.

  • Q: How do I know when the lamp is fully charged?
    A: The lamp emits a soft red light when charging and turns off when fully charged.

  • Q: Can I adjust the brightness of the lamp?
    A: Yes, you can adjust the brightness using the remote control or touch mode.

Smart FootballSpin LampTM
Thank you for your purchase of the Gingko Smart FootballSpin Lamp. Please read the instruction manual carefully to achieve the best performance of this product.

Product Content

Product Charging Instructions

The product usually arrives 70% charge, however, please fully charge before using for the first time by following the below instruction:

  1. Take the USB charging cable and the walnut magnetic charging/ decorative base out from the box.
  2. Connect the USB charging cable to any USB plug adapter with a 5V output adapter (not included) i.e. a smartphone charger or a USB port on the computer.
  3. Carefully connect it to the charging port on the wooden base. The charging port is located on the side of the wooden base.
  4. Place the Gingko Smart FootballSpin Lamp on the top centre of the magnetic charging base to charge it. When charging, The Smart FootballSpin Lamp will be on a very soft Red colour light and it will turn off when fully charged.

Product Operation by Remote Control

There are 3 operation mode available for the Smart FootballSpin Lamp: Remote Control, Touch, and Tap.
The product is automatically connected to the remote control provided. Please note the remote control can only be used when the lamp placed on the charging base or the product still has battery life left.

  1. ON – Press to turn the lamp on.
  2. OFF – Press to turn the lamp off.
  3. – Press to activate the spin.
  4. – Press to deactivate the spin.
  5. Adjust brightness of the lamp, Press Up to brighten the light or down to dim the Light. Please note the light will re-set to original brightness when it’s turned off, you will have to re-adjust the brightness when you turn the lamp on again.
  6. Press to change between White, Warm Yellow or Cool White Light setting.
  7. T15, T30, T60 – Press to set the lamp to timer mode, A flash will confirm the timer function has been activate.
  8. T15 will turn the lamp off after 15 minutes
  9. T30 will turn the lamp off after 30 minutes
  10. T60 will turn the lamp off after 60 minutes

Product Operation by Touch Mode

  • You can change the setting by tapping the round magnet charging dot located at the bottom of the Smart FootballSpin Lamp.
  • Quick Tap 1 time on the button to change the light setting between White, Warm Yellow, Cool White or OFF
  • Long Tap to adjust the brightness of the lamp, remove finger when you have reach your desired brightness. Please note the light will be re-set to original brightness when it’s turned off, you will have to re-adjust the brightness when you turn the lamp on again.
  • A Quick Tap 2 times to activate or deactivate the spin function.
  • Quick Tap 3 time to activate TAP Mode. The light will flash once when the mode has been activated or deactivate.
  • You can place the lamp on any hard, flat surfaces.
  • PLEASE NOTE: The light colour might change when you place the lamp on any other surface due to vibration, you can change back to your desired light colour using the remote provided or tap mode.

Product Operation by Tap Mode

  • This function can only be activated by tapping 3 times as mentioned on the Touch Mode Operation. You can change the light setting by tapping the Smart FootballSpin Lamp, please note, this mode will only change the light colour.
  • Quick Tap once on the top of the Smart FootballSpin Lamp to change the light colour between white, warm yellow and cool white. Tap again will turn the lamp on or off.

What is Smart FootballSpin Lamp Made Of

We care for the environment as much as you and providing something which is sustainably designed and made is also our key product philosophy here at Gingko. The Smart FootballSpin Lamp is made of natural and sustainably sourced wood and eco-friendly material specialized in 3D printing called PLA. Some wood and PLA used on this product may be also from recycled source.Gingko-
Smart-FootballSpin-Lamp-fig- \(7\)

Warranty & Product Care

Warranty
This product is covered under one year manufacturer warranty starting from the date of purchase. Within the warranty period, any repair service or components replacement will be provided for free. Warranty does not apply to the following circumstances:

  1. Product failure due to improper use, misuse, drops, abuse, alteration, faulty installation, power line surge or modification
  2. Product failure due to acts of nature such as natural disaster, fire, flood, or casualty.
  3. Any damage caused to the charging port by user error is not covered by the manufacturer warranty.

Product Care

  1. The product is made of natural wood, any natural wood grain on the wood is not a product fault.
  2. Heavy drop or misuse of this product could cause damage to the lamp and the wooden base.
  3. You may use a damp cloth to clean the wooden exterior, however do not have direct contact with water as this product is not water proof.
  4. It’s recommended to use 5V USB charging adaptors (Not included) to charge this product.
  5. Do not leave any other object on top of the base other than the Smart FootballSpin Lamp.

If you have any further queries about this product, please feel free to get in touch with us at customerservices@gingkodesign.co.uk

  • Unit C23c, Holly Farm Business Park,Kenilworth, CV8 1NP, United Kingdom
  • Copyright c Gingko Design Ltd
  • www.gingkodesign.com
  • Proudly designed in Warwick, UK by Gingko Design Ltd All rights registered
  • Made in ChinaGingko-Smart-FootballSpin-Lamp-fig- \(9\)

Documents / Resources

| Gingko Smart FootballSpin Lamp [pdf] User Manual
Smart FootballSpin Lamp, Smart, FootballSpin Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals