Sunnydaze Decor DW-552 Peaceful Rain Outdoor Fountain Installation Guide
- October 30, 2023
- Sunnydaze DECOR
Table of Contents
Sunnydaze Decor DW-552 Peaceful Rain Outdoor Fountain
Product Information
The Peaceful Rain Outdoor Fountain with LED Lights, model number DW-552, is a decorative water feature designed for outdoor use. The fountain comes with a built-in water tube and LED light cable, and it is equipped with a pump that circulates water and creates a soothing sound. The fountain also features sponge-like polyurethane foam filters to control water flow and prevent splashing. The product has a natural aging process that causes the paint finish to gradually mellow in color over time. The fountain should be assembled on a smooth, level surface to avoid scratching or damaging the finish.
Product Usage Instructions
- Read all warnings and safety precautions before beginning assembly.
- Select a smooth, level surface to place the fountain and assemble the components on a soft, clean surface to avoid scratching or damaging the finish..
- From the access panel in the back of the fountain, locate the built-in water tube and light cable. Connect the pump to the water tube and place the pump inside the fountain.
- Extend the LED light cable and connect the AC adapter.
- Align the power cords with the groove in the access panel cover, then twist the access panel cover to secure it to the back of the fountain.
- Fill the fountain with enough water to keep the pump fully submerged during operation.
- Plug both power cords into properly grounded GFCI outlets.
- When first plugged in, there may be air in the pump. It may take several moments for trapped air to escape, allowing water to flow.
Important Information
It is important to follow recommended care instructions to ensure the
longevity of the product. Any modification to the product or failure to follow
recommended care will void the product warranty. Write down the purchase date
and order information to help expedite customer service inquiries.
Troubleshooting
If the pump or power cord is damaged, it should be replaced. If the fountain is not working properly, refer to the troubleshooting section of the user manual for assistance.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control.
Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer
Reference Number:
Write down the purchase date and order information to help expedite customer service inquiries.
PREPARATION:
Before beginning assembly, read all warnings and safety precautions.
WARNINGS & CAUTIONS:
- WARNINGS:
To reduce the risk of electric shock, only connect the pump to a Ground Fault Circuit Interrupter (GFCI) outlet.
Do not exceed the voltage shown on the pump.
Always disconnect the pump from the power source before performing any maintenance or work on the pump, light(s), or any fountain fittings.
Inspect the pump and power cord for damage before installation and maintenance. If damage is found, the pump should be replaced.
CAUTIONS:
- Use a proper power source as indicated on the pump label. Keep the cords away from high temperatures and heat sources.
- Do not lift the pump by its power cord.
- Keep the fountain out of reach of children and pets.
- Do not let the pump run dry. The pump must be completely submerged for proper operation and cooling.
- Do not pump heated liquids.
- Operate with freshwater only. Avoid heavily chlorinated water and water with high PH levels.
- Do not use harsh chemicals such as bleach to clean the fountain or pump.
ASSEMBLY
NOTE: The water tubing is built into the fountain. Take care when handling the water tube; detaching the water tube from the fountain will damage the fountain and void the product warranty.
- From the access panel in the back of the fountain, locate the built-in water tube and light cable. Connect the pump to the water tube and place the pump inside the fountain.
- Extend the LED light cable and connect the AC adapter.
- Align the power cords with the groove in the access panel cover.
- Twist the access panel cover to secure it to the back of the fountain.
- Fill the fountain with enough water to keep the pump fully submerged during operation.
- Plug both power cords into properly grounded GFCI outlets.
NOTE: When first plugged in, there may be air in the pump.
It may take several moments for trapped air to escape, allowing water to flow.
IMPORTANT INFORMATION
USE & CARE
-
Recommended for outdoor use only. Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
-
Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
-
Only use water in this fountain; distilled water will help prevent mineral buildup but is not required.
Periodically change the water to keep the water, fountain and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use anything abrasive to scrub the fountain.
DO NOT use a pressure washer. -
Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
-
Take care when handling the pump; only pick it up by the body of the pump, never the power cord.
-
During freezing weather, drain and dry the fountain, disconnect the pump and store indoors; allowing ice to form will damage the fountain.
TROUBLESHOOTING
- Ensure that the pump is fully submerged and add water to the basin as needed.
- Check the pump and tubing for obstructions.
- Check the flow control on the body of the pump as it may need to be adjusted to achieve the desired flow rate.
- If the light is not working, ensure the cables are fully connected and the seals are adequately tightened (do not over-tighten).
- If water is not flowing within several moments of the fountain being plugged in, unplug the power supply for a few moments and plug it back in; the pump may have air bubbles inside, which can prevent water from circulating properly.
- Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.
Any modification to the product or failure to follow recommended care will void the product warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>