BOULT AUDIO Probass Propods X Wireless Earbuds User Manual

BOULT AUDIO Probass Propods X Wireless Earbuds

Product Introduction

Summary of Button Functions

1. Silicone Eartips
2. Pod Charging Pin
3. Earbuds Led Indicator
4. Touch Control Area
5. Case Pod Charging Pin
6. Case Battery Charge Indicator
7. C-Type Charging Connector

Connecting to Earbuds

First-time Setup:
Take the earbuds out from the case, the earbuds will automatically turn on. Turn your device’s Bluetooth on. Search for “Boult Audio Propods X” and select to connect.

Regular use :
Once next use, the earbuds will automatically connect with a pre-connected device.

Start Listening

Place the earbuds into your ear and twist slightly for a comfortable and snug fit.

Note: Regularly clean the dust mesh after use to avoid the sound being blocked by dirt and debris.

Power On & Off

• Power-On
  Remove the earbuds from the case, they will automatically turn on and pair with each other.

• Long press the touch control area on both earbuds at the same time for 2 seconds, then the earbuds will turn on and pair with each other.
  Light status: One side flashes red and blue LED light alternatively, and another side flashes blue LED light quickly.
  Power-Off

• Earbuds will automatically turn off and enter charging mode when they are placed in the case.

• Disconnecting the Bluetooth from the device and laying the earbuds down for 3 mins will turn them off.

• Disconnecting the Bluetooth from the device, long-press the touch control area for 5s, and the earbuds will turn off.

Start Charging

Charging the Earbuds
Place the earbuds into the case, once the charging pin connects, the light on the charging case will turn on to display the case battery remains, then the rst and forth light keep white on indicate the earbuds charging, light off means the battery is full.

Charging the Case
Plug the charging case into 5V/1A adapter with a Type-C cable (include in the package). The charging light will flash white when charging. When full the white light will stay on and the case should be disconnected from the power source.

Specification

• Bluetooth Standard: Version 5.1
• Bluetooth Profile: HSP/HFP/A2DP/AVRCP
• Output Voltage of Base: 3.7V
• Charging time Earbuds- 1.5H, Charging case- 1H
• Working distance: 10M
• Compatible System: Android/IOS/Windows

Clear to pairing

Clear the pairing record of earbuds and mobile phones:
Take out the earbuds from the charging case, and touch the left and right earbuds 5 times, it will clear the record of the Bluetooth device. Then search for the Bluetooth name “ Boult Audio ProPods X” to pair.

Resume pairing of left and right earbuds:
Put earbuds in the charging case and charge, then take earbuds out of the charging case when they charging a few minutes. they will enter into pairing mode automatically.

TroubleShooting

• The earbuds don’t pair with each other?
• Place the earbuds into the case for charging for a few seconds. take them out of the case and try to connect again.
• The earbuds don’t charge when placed into the case.
• Check to see if the charging case light will turn on when earbuds are placed inside. If it doesn’t light upcharge the case first.
• The sound is imbalanced between the left and right sides.
• Please clean the earbuds mesh after use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>