SOYAL AR-888-PBI Touchless Infrared Button Installation Guide
- June 5, 2024
- SOYAL
Table of Contents
SOYAL AR-888-PBI Touchless Infrared Button
Installation
AR-888-PB: Touchless Infrared Button – LED Ring (Standard: Green/Red ; By Order: Blue/Red)
Connector Table / Dip_switch
Connector
| Function | Cable | Color | Description |
|---|---|---|---|
| Relay | COM | 1 | Green |
| N.O. | 2 | Blue | DC24V / 1A |
| N.C. | 3 | Purple | DC24V / 1A |
| Power | 4 | Black | DC 0V |
| 5 | Red | DC 9-24V |
Dip switch Output Mode
| SW1| SW2| OUTPUT
---|---|---|---
※1| ON| ON| Pulse
2| ON| OFF| Delay 3 Sec.
3| OFF| ON| Latch
4| OFF| OFF| Delay 6 Sec.
Sensing distance adjustment
LED status adjustment
| Standby mode| Motion
---|---|---
1| LED G(Green)| LED R(RED)
※2| LED R(RED)| LED G(Green)
3| LED GR
(Green/RED)
| —
4| —| LED GR
(Green/RED))
Wiring Diagrams
-
Pull the cables from the square holes of the eva foam gasket and mounting plate.
-
Use a screwdriver to screw the mounting plate B onto the wall with Flat Head Cap Philips Tapping Screws (Excluded, the Installer should prepare before installation.
-
Connect the cables to the backside of body C and attach C to B at lower postion of B. Push C up to make the cogging hooked completely.
-
Use the Allen key and screws to assemble the body C onto the mounting plate B. Attach the Back Cover D to C.
-
US Mounting Hole: 73x48x40mm(HxWxD)
-
Screw hole pitch : 84mm
-
Suitable for 70X118 1-module flush-mounting box.
(Australian, Italy, USA(501E) Standard) -
EU Mounting Hole: 57x53x40mm(HxWxD)
-
Screw hole pitch: 60mm
-
Suitable for 86X86 flush-mounting box.
(UK, Continental Europe, Germany Standard)