SOYAL 721APP App for Android Instruction Manual
- June 5, 2024
- SOYAL
Table of Contents
SOYAL 721APP App for Android Instruction Manual
Application 3 : SOYAL 721 APP / 727 APP
SOYAL 721 APP Function : The user can use mobile phone to control SOYAL
controller reader via Ethernet, 721 APP support to remote open the door lock,
monitor and display the controller status of arming, disarm, alarm on mobile
phone. Now the APP can be downloaded on Google store for Android system.
APP Setting Procedures
Step 1: Install 721 APP and then open it
Step Step 2. Enter Account and Password (Both default account and default password is admin)
- Account admin (default account)
- Password admin (default password)
Step 3. Click “Add” to set up controller connection
Step 4. Enter name / IP Address /communication/ Port Number /Noe ID,
click “Add” button
Step 5. Click the blue button to connect the controller
Step 6. Enter 721 APP function page
6-1 Display Door open/ close status
6-2 Display Door Relay output status
6-3 Touch Arming button, the device will enter Arming Mode. Touch Disarm
button, exit arming mode.
6-4 Slide the first button to right, the function is to open the door
lock based on the setting of Door Relay time and the door lock will be
automatically closed after the setting door time is end.
6-5 Slide the middle button to right, the door lock will keep unlock
6-6, Till to Slide the bottom button to right, the door lock will be lock
again.
Step 7
Change login account and password
7-1 Click the symbol in the upper right corner
7-2 Click Settings in the upper right corner
7-3 Select [Change Account]/[Change Password] to enter new Account and
new Password.
More Details :
Video : https://www.youtube.com/watch?v=YRm9nGUA1lI
SOYAL 727 APP Function: SOYAL network Digital I/O Module support to
monitor DI/DO status and remote control DO output; AR-727-CM-I0 is built-in 8
DI and 4 DO (built-in one Relay on the first DOO point) that can be used in
monitoring door sensor status, high/low water level detection, push button and
other status detection, as well as switch, flashing buzzer, electric lock and
other equipment on / off control.
Now the APP can be downloaded on Google store for Android system or download
from SOYAL official website.
APP Setting Procedures
Step 1. Install 721 APP and then open it
Step 2. Click Settings in the upper right corner
Step 3. Set the following information: account (User) / Password /IP
Address / Port Number/ Change Device Name / DI_O-D17 / DO_O-D0_3.
Step 4. Enter 727 APP function operation page
4-1 Real-time DI status display
4-2 Real-time DO output control; enter output seconds and slide the
button to right (the range of seconds is 0.1-600 seconds)
More Details :
Video : https://www.youtube.com/watch?v=8hMFq9SqVkM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>