GUANGDONG NX01 Robot Cubby Instruction Manual

GUANGDONG NX01 Robot Cubby Instruction Manual

INTRODUCTION

Thank you for purchasing ROBOT CUBBY! Please read and follow all instructions carefully before using this robot, and keep this instruction manual as a reference.

FUNCTIONS

1. Facial expression
2. Smart speech
3. Bluetooth
4. Special effect animation
5. Auto demonstration
6. App control
7. Senior programming
8. Children’s songs in English
9. Sound effect of facial expression

GET TO KNOW YOUR ROBOT

1. LED light
2. Wheel
3. 3-position power switch(OFF/ON/ Bluetooth speaker)
4. USB charging port
5. Restart
6. Loudspeaker
7. Facial expression
8. Music
9. Demonstration
10. Resetting

FUNCTION SETTING

Start-up Setting

1. Slide the power switch to ON ­ turn it on to the start-up state. The robot plays the start-up sound effect + LED light of the eyes is on.
2. Slide the power switch to Bluetooth speaker and enter the Bluetooth speaker mode. It is static without actions. This mode is used for music playing and mobile phone connection.
3. Slide the power switch to OFF ­ turn it off. It is directly powered off and starts a shutdown state.

Button Instruction

SMART SPEECH

Say a voice command to make the robot execute an action.

SCAN TO DOWNLOAD APP

To install TIA APP, please use a mobile device to scan the following QR code for downloading. (http://fir.icloudrover.com/nb15 as an alternative downloading link)

http://fir.icloudrover.com/nb15?utm_source=fir&utm_medium=qr

APP INTERFACE

Interface of Remote Control

1. Bluetooth: enter the Bluetooth interface
2. Enter: enter the mode homepage

Interface of Bluetooth connection

Click to connect Bluetooth

Interface of Mode Homepage

1. Drive
2. Programming

Interface of Drive Mode

1. Direction joystick (control the robot to go ahead, go backward, turn left and turn right)
2. Facial expression edit (click to enter the interface of facial expression edit)
3. Bluetooth (on/off)
4. Homepage (back to mode homepage interface)
5. Back (back to mode homepage interface)
6. Selector of pre-programmed facial expression (switch pre-loaded facial expressions of robot)
7. Selector of customized facial expression (switch customized edited facial expressions)
8. Music (play pre-loaded music of robot)
9. Sound effect (play pre-loaded sound effects of robot)
10. Display (control on/off of light)
11. Sound adjustment key (control the volume of the robot)
12. Look to the left/right (make the robot look to the left/right)

Interface of Facial Expression Edit

1. Bluetooth (on/off)
2. Homepage (back to mode homepage interface)
3. Back (back to drive mode interface)
4. Page slider (add page click points, up to 10 pages)
5. Edit column of facial expressions (edit or delete all facial expressions, pre-programmed robot facial expressions not displayed)
6. Add (add a new facial expression, newly-added according to original facial expressions)
7. Column of facial expressions (drag to select any facial expression, first three as pre-programmed facial expressions)
8. Cancel (delete the selected facial expression)
9. Delete (empty the facial expression edit column)
10. Animation (switch facial expression display effects)
11. Upload (transfer facial expression to robot)

Interface of Programming

Special Effect Animation

ROBOT CHARGING

Insert one end of the USB cable into the robot charging port, with the other end connected to the USB power port for charging (eg. laptop, mobile power supply, USB outlet, power adapter). Built-in battery capacity of 600mA for the robot, with 120min charging.

TROUBLESHOOTING GUIDE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an out let on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, underside operation.

References

• fir.icloudrover.com/nb15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>