casselin C7PASCL40 Electric Griddle Plate Instruction Manual

casselin C7PASCL40 Electric Griddle Plate Instruction Manual

1.PRESENTATION

1.1 Information

This user manual serves as information to all its users. It describes the installation and handling of the device. Safety instructions and technical knowledge of the device are detailed in this manual. They are essential conditions for the proper use of professional equipment. Each user must scrupulously respect all instructions for use. This user manual must be kept next to the product for proper use and access to the instructions at all times for each user.

1.2 Description of symbols

Information, instructions for use and safety instructions are represented by symbols. It is essential to follow these instructions in order to avoid material damage and personal injury.

⚠ WARNING This symbol means that there is a danger that could cause injury. Concentration and caution are imperative when operating this device.

ELECTRICAL DANGER This means that there is a danger from electric current. Failure to follow instructions may result in risk of injury and death.

⚠ ATTENTION This symbol is used to indicate that failure to follow the instructions may result in failure or destruction of the device.

NOTICED
This symbol indicates good practices and advice that must be applied for effective use of the device.

NOTICED
You must read these instructions for use before putting the device into service. We accept no liability for damage and breakdowns resulting from non- compliance with the instructions for use. The Casselin company reserves the right to make any modifications, whether technical, informative or marketing, to our product without notice.

1.3 Copyright

The user manual is protected by copyright law. Reproductions of all types and forms ­ even partial ­ as well as the exploitation and/or transmission of its contents are not permitted without our authorization. Any violation of these provisions entitles you to damages. Other rights remain reserved.

1.4 Declaration of conformity

The device complies with current European Union standards and directives. We attest to this in the CE declaration of conformity.

1.5 Guarantee

The instructions given in these instructions for use have been drawn up taking into account the regulations in force, current technical developments, our knowledge and experience. All translations have been produced professionally. However, we decline all responsibility in the event of a translation error. The attached French version is authentic.

2. SECURITY

Safety instructions are used to avoid dangers. They are mentioned in the individual chapters and are characterized by symbols. Their compliance guarantees optimal protection against risks and allows ideal operation of the device. Safety instructions must be available and legible on the devices.

2.1 Principles

Safety instructions are established to avoid errors, dangerous uses and breakdowns. Therefore, the device must neither be altered nor misused. The device is designed according to currently developed technical rules. This notice must be kept. The device must be used in premises intended for this purpose and only by a responsible person with knowledge of the operation of the device.

2.2 Intended use

The operation of the device and the safety of use are only guaranteed in the event of normal and correct use of it. Assembly and technical interventions must be carried out by professionals.

⚠ ATTENTION
Any other use is considered non-compliant. Any accusation linked to improper use of the device is not admissible and will be void. Intended use corresponds to use described in these instructions for use. Proper use corresponds to compliance with safety, hygiene, cleaning and maintenance rules.

2.3 Safety instructions when using the device

Information relating to occupational safety refers to the European Union regulations valid at the time of manufacture of the device. For commercial use of the device, the operator undertakes, throughout the duration of its use, to verify the conformity of the measures cited in terms of work safety with the current state of the arsenal of advice and to comply with the new regulations. For non-EU countries, the laws and provisions of the country must be respected. All environmental protection provisions must also be respected.

⚠ ATTENTION
The device must be operated by people with sufficient physical and intellectual means. People with limited physical and intellectual means must be supervised to use this device. Use prohibited by children and minors (exceptions made within a legal framework provided for by law) If the device is used by a third party, the instructions for use must be available before any use. Any new user must have read the instructions for use. The device must only be used in premises intended for this purpose.

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection following transport

Verification of the absence of damage and the completeness of the device must be carried out upon receipt of the package. If transport damage is identified, refuse or accept the delivered product only with reservation. A complaint detailing the defects noted must subsequently be made. The collection of damages is only possible in the event of a complaint made within the stipulated time limits, i.e. 24-48 hours maximum.
written on the carrier’s paper or digital delivery notes.

3.2 Packaging

The packaging of the device must be kept in the event of moving, or for return to after-sales service. The interior and exterior packaging must be completely removed before using the device. The standards in force in your country regarding environmental protection must be respected before destruction of the packaging.

3.3. Storage

⚠ ATTENTION

The device can be kept in stock but only in its original closed packaging. Storage can be carried out in accordance with these conditions:

• Storage in a dry, non-humid room
• Sheltered from the sun
• Stock control for more than 2 months (general condition of the device and all the elements constituting it) · No shaking of the material · Storage in closed premises and not outside.

4. HARDWARE FEATURES

• Subject to change

5. INSTALLATION AND USE

5.1 Safety instructions

ELECTRICAL DANGER
Risk linked to electric current!

• No contact with heat sources should take place with the electrical cord.
• The cord should not hang over the edge of a table or counter.
• Do not pour water into a device that is operating or still hot.
• The device must be properly connected and comply with current regulations.

⚠ WARNING
When operating, the device can reach high temperatures. To avoid burns and accidents, do not use the device if it is malfunctioning, and do not use spare parts that are not original.

ELECTRICAL DANGER
Risk linked to electric current! If incorrectly installed, the device may be dangerous and cause injury. Before any installation, check the electrical network data. Plug in the device only when it complies. The device must be unpacked and checked completely before connection by a professional.

5.2 Use

⚠ WARNING
The installation of the device and maintenance should only be carried out by professionals.

• Do not leave the device running without monitoring it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.

MANUAL
FACILITY
The device must be completely removed from its packaging. All protection must be completely removed. Place the device upright on a solid, flat surface. Never place the device on a flammable surface. Do not install this appliance near open fires or other heating appliances. It is prohibited to place flammable objects on the device or within a distance of less than 10 cm from the device. Place the device under a hood to eliminate steam and bad odors.

Safety distances for flammable materials according to their degree of flammability:
-A non-flammable: granite, sandstone, concrete, bricks, ceramic tiles, coating
-B hardly flammable: acumin, heraclitus, lihnos, itaver
-C1 poorly flammable: wood from hardwood trees, plywood, hardened paper, umakart
-C2 medium flammability: chipboard, solodur, cork, rubber, coverings
-C3 easy flammability: wood fiber boards, polystyrene, polyurethene, PVC

The electrical cable must be protected to at least 16 amps. The device must be plugged directly into a wall outlet. Using a power strip will cause the device to trip. When the device is placed against a wall, it must be able to withstand a temperature of 60°C. If this is not the case, it is essential to insert a protective layer. Ensure that all ventilation openings are not blocked.

Before the first start-up, remove the protective sheet. Clean all surfaces with a soft cloth, lukewarm water and a detergent, to remove the anti-rust products applied during manufacturing and then wipe the device with a clean cloth .

IN ORDER TO AVOID THE FORMATION OF RUST, THE SURFACE OF THE PLATES MUST BE TREATED WITH VEGETABLE OIL AFTER EACH CLEANING

EN Turn on the appliance at full power for approximately 15-20 minutes to cook the plate. Never leave the device running unattended!!

Grease collector drawer

This container must be checked regularly and emptied in time. The container must be cleaned after each unplugging of the appliance.

OBSERVATIONS AND RECOMMENDATIONS

The plate can be divided into two heating zones, which allows cooking with two different temperatures or using only one side. Turn the knob (A) and set the desired temperature. The indicators (B) and (C) light up. The indicator light (B) lights up when the device is connected to electricity. The indicator light (C) lights up when the heating spirals are in operation. The indicator light (C) goes out when the appliance reaches the set temperature. Stop the device by turning the knob (A) to position “0”.

6.CLEANING AND MAINTENANCE

6.1 Safety instructions

Any maintenance, cleaning or repair of the device must be carried out with the device unplugged (isolated from all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not penetrate inside the device. Never immerse the device in water or other liquid. Use Casselin brand products intended for this purpose.

⚠ WARNING
The device cannot be cleaned with a direct water jet (no pressurized water jet).

6.2 Daily maintenance

Unplug the device Clean the device with warm water and a clean cloth after each use After cleaning, use a soft, dry cloth to polish and dry the device. All parts must be dried. Store the device in a dry place.

6.3 Safety instructions for maintaining the device

Daily check for damage to the power cord. Never use the appliance when the cord is damaged. If the cord shows defects, it must be replaced by a qualified technician. In the event of a breakdown, contact your dealer. Any maintenance or repair work should only be carried out by a professional.

NOTICED
In the event of a disconnection, unplug the appliance, allow it to cool and contact your retailer. If the unit does not start, check your power cord. The device should not be plugged into a power strip but directly into a wall outlet. For any other anomaly, contact your dealer.

NOTICED
Waste from used devices: any used device must, during its disposal, comply with the regulations in force in its country*. It is imperative to render the device unusable before disposal by removing the power cable.

• in terms of ecology and recycling

7. IRREGULARITY OF OPERATION

NOTICED
The malfunctions mentioned above are cited for information purposes only and remain virtual. If you have any doubts, contact your reseller.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>