Guangdong Shuoqiang Electronics E1 Open Ear Earbuds User Manual

June 3, 2024
Guangdong Shuoqiang Electronics

Guangdong Shuoqiang Electronics E1 Open Ear Earbuds

Thank you for cf-loosing our El open-ear earbuds.Please read this manual carefully and keep it for future reference.

Product Features

  1. Dual microphone me noise cancellation.
  2. Support music/game dual sound effect switching.
  3. Th• wireless earbuds weighs around 10.5g, which is light and comfortable to use.
  4. Directional sound transmission tcclinotogy For cfoar and natural sound.

Package Contents

  • Open ear headphones
  • Charging Case
  • Type-C chiarging cable
  • Instruction manual

Specifications

Product Overview

  1. Power on
    After opening the c:harging case, the earbuds will be automatically turned on, then enter the Bluelooth pairing state. Or pressc:ind hold the tauch ara:1 for3seconds in the power off state to manually tum it on.

  2. Power off
    Put thc carbuds back into the charging rasc. When the lid is closed, the earbuds will automatically :shut down and enter the charging state. Press and hold the left/right ear touch are<i rorsseconds in the pow,er ofl st.rte to manuallyturn it off.

  3. :ID Play/pause music
    Double tap any touch area to play/pause the music.

  4. Previous/Next track
    When playing music, press and hold the touch area of the left earphone for 2 seconds to switch to the previous track. When playing music, press and hold the touch area of the right earphone for 2 seconds to switch to the nc.t track.

  5. Answers to ca11s
    Answering a call: In the incoming call status, double-tap the touch area of any side of the earphone.
    End a call: During a call, double-tap the touch area or any earphone. Reject an i nooming call: In the inooming call status, press and hold the touch c:irea of any side of the earbuds for 2 :seconds.

  6. Voice Assistant
    Touch the left earphone tcuch area 3 times, then release to activate the voice assistc1nt.

  7. Sound mode
    Touch the left earphone touch area 3 times, then release to activate the voice assistant

  8. Voice Assistant
    Touch the right earphone touch area 3 times to enter the sound effect mode.
    Enter the game mode, the earbuds will sound “Gaming Mode”. Enter the music mode, the earbuds. will sound “Music Mode” (The default is musk mode),

  9. Reconnection
    When the carbuds are sucxrssfully paired with the device, put the earbuds back into the charging case when not using it. If You want to take it out for use a g,a in, the earbuds will automatically connect to the last paired device. In reconnection mode, the blue light olthe earbuds indicatnrflashes onc.e every 1 second.
    If the connection fails to pair back with the last device for more than 10 seconds, itv.ill automatically enter the normal pending connection sratus. The pending connection stab.Js will remain for 3 minutes. Or it will automatically shut down after 3 minutes.

  10. Disconnection
    When the earbuds are disconnected, the earbuds will sound the prompt “disc□nnected”.
    Afterdisconnection, it will enterthe reconnection status and tne reconnection state will remain For 3 mf nutes. lfthe connection Is successful, the earbuds will sound the prompt “connected”, otherwise, it will automatically shut down aer 3 minutes.

  11. The status of the earbuds when the battery is low
    When the battery olthe earbuds is lower than 10%, it will enter the low.battery alert status (low.battery alert). When the power is lower than 5%, the earbuds will power off.
    When the earbuds’ battery is low, it will sound “‘low battery”. The prompt tone reminds every 3 minutes, and the red light on the earbuds flashes (once every 10 seconds),

  12. Status of the charging case
    A. The battery level display of the charging case
    When opening/closing the charging case cover/headphones In and of the charging case:

  13. When the power is 0,30%, the 3 status indicators on the charging case will lfght up red for 5 seconds and then turn off.

  14. When the power is 30-70%, the 3 status indicators on the charging case will light up blue for 5 seconds and then go out.

  15. When the power is between T0-100%, the three status indicators on the charging case will light up green for 5 seconds and then tum off.

  *  **B**. When the charger charges the battery in the charging case  

I) When chargl ng, me 3 status Indicators on the charging case will light up with blue breathing lights (the 3 lights will gradually light up for 2 seconds and fade out in 2 seconds to form a breathing effect lighting. There w·,11 be no dazzr,ng reeling when the light is at the brightest).

  1. Forced clearing and pairing
    Put the left and right earbuds into the charging case at the same time, and press and hold the button on the charging case for Sseconds, the earbuds wi II dear the pairing record with other devices.
    After successfu I clearing, the three lights of the status lndlcator on the charging case flash twice at the same time. Then the headset will enter the nomnal state of waiting to be con necred, and can be

Connection Instruction

Before using it for the first time, put the 2 ear buds into the charging case and close the lid of the charging case. Then use the TYPE-C charging cable in the package to charge the charging case for more than half an hour. Turn on the earbuds after the earbuds and c.harging case are fully charged.
Open the charging case lid, the earbuds will automatically power on and search for devices, Open the phone’s Bluetooth to search for SOMiC El connection. {Make sure the earbuds are paired and the distance betweenGuangdong-
Shuoqiang-Electronics-E1-Open-Ear-Earbuds-FIG 2

FAQ

  1. why can’t the earbuds be turned on?
    Before using it for the first time, put the two earbuds into the charging case and close the lid olthe charging case. Then use the TYPE·C charging rable in the package to charge the charging casefur more than half an hour. Turn on the earbuds after the earbuds and charging case are fully –

  2. Why C’1n’t the mobile phone’s Bluetooth search for “SOMiC El” Why is the c:onnection unstable?
    Why is the c:onnection disc:onnected/the sound is stuck?
    The Bluetooth connection of the mobile phone should not exceed a distance of !O meters.At the same time, please avoid them being blocked by walls or crowds. (Subway stations, high-speed rall stations and aliports will have strong. interferern::e to Bluetooth signals. It is normal for Bluetooth signals to be unstable in these scenarios.)
    Please make sure that the earbuds and charging case are fully charged. @ Put tt,e earbuds into the charging case and dose the lid then take it out after 10 seconds. Tum on the E!luetooth of the mobile phone and search for the earbuds again.
    llthe Connection still fails after doing the abooe steps, please check if the earphone has been connected by other Bluetooth devic,,s nearby. Please tum oif theBluetooth device:i nearby, and then repeal step 3,

  3. Why does the earbuds only emit sound from one side? Makesure the earbudsrmd dir.ugingcase are fully charged. Then clear.:ill the Bluetooth pairing records of the mobile phone.:1nd tum off the Bluctooth. Pet the carbuds into the charging case and close the lid. After 10 seconds, take out te earbuds and hold for 5 seconds, then turn on the Bluetooth of the mobile phone to search for the earbuds again and connect them.

  4. Why is the touch function of the earbuds not working?

  5. Make sure: your finger touches the touch area of the earbuds accurately.

  6. Try to speed up the rhythm of double-dick and tliple-click [complete double-click and triple-click in about 1 second).

  7. The earpho11e can’t open the music app on the mobile phone. Therefore, the touch oontrol such as playing/pausing/switching the trac.ks wm only work when the musk a pp is running

  8. Touch control has different sensitivities for different human bodies. Water or foreig,, objects on the ringer or touch area will affect the touch effect. Please clean the surface of the earbuds and try again,

  9. Why doesn’t the call sound play from the earbuds when inoomingcall is answered by operarlng the screen of the mobile phone, the call will be c.ommunic:ated with the mobile phone by default. If yoo want to use the earphone to answer me cal please double-touch either

Precautions

  1. This produc.t is compatible with Android and IOS systems.
  2. If it does not work on an operating system not listed or on the device, please contact the support team for assi5lanc.e.
  3. When using the earbuds, if there Is no sound from the earbuds, it may be caused by compatibi lily issues or improper use, please oontact our service team for assistance.
  4. If any parts are damaged, please stop using them and contact the after-sales service team for help to avoid unnecessary damage.
  5. If you want to know more information, please visit SOMIC’s official website www.itsomic.com.

Warranty

SOMIC’s products are c□vered by a 12-month warrantyfrom the date cf purchase. II you have any questions, please contact the after-sales team, 1ve will help you solve the problem at any time. For more information, please visit SOM IC’s official website www.itsomlc.com.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority ta operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of tJ,e FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 21 residential installation. Tt-iis equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, the-re is no guarantee that intcrfc-rc-ncc will not occur in a particular installation. If thls. equipment does cause harmful Interference to radio or tel,.lslon reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more olthe following measures:

  • Reorient or relocah: the rei:eiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into.an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio(TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the fol lowing two conditions (l}this device may not cause harmful interference, and {2) th is deviae must accept any interference received, including interference that may cause undesired operation,

Service E-mail

NORTH AMERICA
[email protected](US)
[email protected]{CA))

ASIA PACIFIC
[email protected](JP)

EUROPE
[email protected](EU)

AUSTRALIA
[email protected](AU)

MANUFACTURER
Manufacturer;
Dongguan Branch ofGuangdong SOMIC High-Tech Co., Ltd
Address:
No.9, Lianxin Road,Sl,angJiao Community, Chang’an Town,Dongguan 523000,Guansdong, China

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Guangdong Shuoqiang Electronics User Manuals

Related Manuals