Guangdong Ansiondarry Technology Co Ltd Y-124 Remote-Control Unit User Manual
- June 1, 2024
- Guangdong Ansiondarry Technology Co Ltd
Table of Contents
Guangdong Ansiondarry Technology Co Ltd Y-124 Remote-Control Unit
Product Information
Remote-control Unit Y-124
This remote-control unit complies with part 15 of the FCC Rules. It is designed to provide reliable control over compatible devices within its range.
Specifications
- Model: Y-124
- Compliance: FCC Part 15
- Range: [Specify range]
- Power Source: [Specify power source]
- Compatibility: [Specify compatible devices]
Product Usage Instructions
1. Powering On/Off
To power on the remote-control unit, press and hold the power button until the indicator light turns on. To power off, repeat the same process until the indicator light turns off.
2. Device Control
Ensure the remote-control unit is pointed towards the device you want to control. Press the corresponding buttons for various functions such as volume control, channel selection, or playback.
3. Range Limitations
Keep in mind the specified range of the remote-control unit to ensure optimal performance. Operating the unit beyond its range may result in decreased functionality.
4. Battery Replacement
When the indicator light becomes dim or unresponsive, it indicates low battery. Replace the batteries following the instructions in the user manual to continue using the remote-control unit.
FAQ
- Q: What should I do if the remote-control unit is not working?
- A: Check the batteries and ensure they are correctly inserted. Also, verify that there are no obstructions between the remote and the device being controlled.
- Q: Can the remote-control unit be programmed for additional devices?
- A: Refer to the user manual for instructions on how to program the remote control unit for use with other compatible devices.
Product Overview
REMOTE CONTROL
The Remote distance is within 25ft (7.62 m). It is magnetic so that you can
stick it on the lamp pipe and other magnetic surfaces.
Guangdong Ansiondarry Technology Co.,Ltd.
- Model: Y-124
- Input: DC 3V
- Made in China
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
“`
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>