Shenzhen Lark Acoustics BL-MT1 Wireless Speaker Instructions
- June 6, 2024
- Shenzhen Lark Acoustics
Table of Contents
Lark Acoustics BL-MT1 Wireless Speaker
Instructions
Appearance
Packing List
Button Description
| 1 | Power on/Power off | |
|---|---|---|
| 2 | Volume Up | |
| 3 | Volume Down | |
| 4 |
| Microphone call
5| | USB Type-C Interface
6| | Microphone mute
*Built-in speaker and 4-microphone array with high-efficiency Acoustic echo cancellation, noise suppression and Auto-gain control functions..
Instructions
Power on
Press 2 seconds, blue light flash 2 seconds, default status: pairing after
power on.
Power off
press for 3 seconds, red light flashes 100ms on, 100ms off, 5 times device
shuts down.
Bluetooth Pairing
Enable Bluetooth settings on phone, select “Kulark S1”, pairing completed,
blue light off
Clear pairing history
Press for 6 seconds, the blue light flashes, 200ms on,200ms off.
Battery is low
In power-on state, when the battery power is less than 20%, light flashes red
200ms on,200ms off
Charge
When USB Type-C is connected a power adapter or to a PC, light flashes red
during charging
USB Disk function
Power off the device. Connect to the PC via USB cable, the device can be USB
Disk
Product warranty is implemented in accordance with the rules of the sales
platform.*
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received.
including interference that may cause undesired operation.
FCC RF Retllatbn Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirements. The device can be used in port-able exposure conditions without restriction.
Warranty Card
Product warranty is implemented in accordance with the rules of the sales
platform.
Username…………………………….
Address / Postcode……………………………………
Phone number……………………………
Product model…………………
Product number……………..
Purchase date………………
Invoice number………………….
Sales unit name…………….
Production Date………….
Sales unit: (seal)……………………………