Vent-Axia 102310 Stylish and Versatile Bathroom Fan Instruction Manual
- June 16, 2024
- Vent-Axia
Table of Contents
Stylish and versatile bathroom fan
102310 Stylish and Versatile Bathroom Fan
Vent-Axia Connect App User Guide
A product by
These slides are designed to aid in the set up and demonstration of the Svara app controlled fan. The fan can be used without the app and revert to factory settings.
Each fan has a unique pin number which you can find on the F&W or motor PCB.
The fan will display a white light to show communication is taking place.
Due to the continuous running function and the max air flow this can also be
used as a kitchen fan.
If you do not have the F&W, the pin code is situated on one of the two
inserted arms.
This can be accessed by simply removing the centre impeller housing by pulling
towards you.
This action also allows the owner/ user to clean inside the ducting in a
simple and accessible manner.
If you have more than one fan in the home, you can rename them to suit their
locations.
For example
- Family Bathroom
- En-Suite 1
- En-Suite 2
- Spare Room
- Utility Room
- Kitchen
The name will appear in the full list and gives the user the reassurance that they have selected the correct fan before proceeding to change the settings or functionality.
If replacing a standard basic fan or pull cord fan and have two wires, select
NO.
If replacing a timer fan and have three wires present you can press YES.
However, due the over run timer being part of the programmable functionality
this is controlled by the app and therefore can be used in either case.
Switch Live is not needed to operate an over run timer as it is with other
fans.
The fan can also be used as an intermittent fan.
However, for best results, please select NO and use as continuous running fan.
As well as enhanced performance the running costs are lowered when this option
is selected.
In the Scandinavian market extractor fans are often used to move heat between
rooms.
It is unlikely to be used for this function in the UK, therefore select NO.
Once you have linked the fan, you can proceed to setting the individual fans
the way you want.
Providing you with the most controllable and flexible fan available.
Once the set up is complete you can select the individual fan from the list.
You can then begin to enjoy the flexibility and controllability of the Lo-
Carbon Svara.
By selecting the options cog at the top of the page you can make some
functional changes.
Select how you want to display the airflow. We would suggest selecting the LPS
display option. This way when adjusting the sensitivity of the individual
functions, it will be measured in the air moved.
- Manually boost the fan for 15 minutes at any time to apply maximum ventilation.
- Switch the sensors on /off.
- Trickle or Basic Ventilation function. This will adjust the sensitivity and extraction rate of the continuous running cycle.
- The light sensor allows the fan to be boosted automatically when a light is turned on in the room. This can have a delay timer applied to avoid the boost activating on shorter visits. It also has an overrun function. Both of these are accessed by selecting more options once light sensor is selected.
- Adjusts the sensitivity and extraction rate of the humidity sensor function.
- Schedule if you want silent hours by stopping the fan from boosting automatically. During these hours only the trickle function will be in place and the fan will not go to boost.
- Choose purge cycles for periods should you leave the house unoccupied. By selecting this option the fan will boost twice a day for either 30mins, 45 mins or 60 mins. This will prevent the house being full of stale and stuffy air when returning home.
Once each of the individual sensors have been selected the adjustment is
simple. By simply sliding the bar up and down the amount of air moved when the
function is activated is increased or reduced.
For example, when the humidity function is activated the air flow can be
adjusted from 22 LPS to 30 LPS.
This gives the end user total control as well as having the individual
functions being able to be turned on and off you can also adjust the
functionality of the settings.
Select if you want to switch trickle/ basic speed off.
Select sensitivity, overrun and delay start periods for the light sensor. This is obtained by selecting more options once light sensor has been accessed.
Select sensitivity of the humidity sensor. This adjusts the amount of humidity required to activate the function. Then you can use the sliding scale to increase or decreasethe air moved in the function.
The Lo-Carbon Svara from Vent-Axia.
A stylish and versatile bathroom fan. The fan benefits from a DC Lo-Carbon
motor making it extremely low cost to run.
It also has a 12V input allowing it to be used in motor homes, caravans, boats
etc. Stylish modern Scandinavian design.
Head Office:
Fleming Way, Crawley, West Sussex, RH10 9YX
Sales Enquiries:
Tel: 0844 8560590 Fax: 01293 565169
Technical Support:
Tel: 0344 8560594 Fax: 01293 532814
Documents / Resources
|
Vent-Axia 102310 Stylish and Versatile Bathroom
Fan
[pdf] Instruction Manual
102310 Stylish and Versatile Bathroom Fan, 102310, Stylish and Versatile
Bathroom Fan, Versatile Bathroom Fan, Bathroom Fan, Fan
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>