Guangdong Lin Sheng Intelligent Technology T980 Automatic Pet Feeder Instruction Manual

Guangdong Lin Sheng Intelligent Technology T980 Automatic Pet Feeder

CAUTION

1. Do not pull the power cord out directly when plugging in or unplugging the adapter.
2. Do not put any foreign objects in the device.
3. Do not disassemble this product by yourself.
4. Keep out of reach of children.
5. Do not use the adapter if the power cord is damaged or not working properly.
6. Indoor use only.
7. Dry food only for treat container Suggested snack size is between 5-15 mm.
8. This product contains electric components. It is NOT waterproof. Do NOT place the device in wet areas.
9. This product does not apply to any use other than accompanying the purchaser’s own pet.
10. Warning: Check surrounding areas on PetU app camera before dispensing treats to avoid dispensing towards human or pet’ s eyes.
11. Warning: Pet treats are not to be consumed by children, please use caution and supervision when dispensing around children.
12. Warning: Stop using the device and contact the customer service if there is a sign of malfunction such as abnormal odor, smoke, or heat.

Please read the instruction manual carefully before using
Thank you for choosing the PetU intelligent produci, in order to guarantee your per.sonnel and property safety, please read this manual carefully before using. Under no circumstances shall PetU be liable to pay oompensation or damages to any person or any loss, injury, or damage, unless it’s explicitly stipulated in the laws, whatsoever occasioned by this product or as a result of not following the items and conditions and precautions laid in this manual.

About instruction manual

The authorization of the instruciion manual, trademark and font size are owned by PetU and its affiliated party; in case the items and conditions laid in the instruction manual are not identical with the actual product (including the APP), the actual produci (APP) shall be prevailing. PetU shall, subjeci lo the law, reserve the rights to modify items and oondilions laid in the instruciion manual without further notice, as well as the ftnal interpretation of it. Objection to the instruciion manual, if any, shall be raised in writing by the customers in 7(seven)days after purchasing, otherwise, it’s assumed that the customer has completely accepted and understood all terms and conditions of the instruction manual.

Statement of authorization
This APP( PetU) shall keep and protect the individual authority of all users, in order to provide more accurate and personalized service to you, this APP shall be used in accordance with the authorization, and sharing the operating right of your equipment This APP shall be very careful with these information. Unless otherwise specified in this statement of Authorization, this APP shall not disclose these information to the third party without your permission.
If you have shared the authorization to another user, helshe shall have such authorization of this equipment es camera, photograph, listening, etc. In caB& the equipment uB&r hae decided to ehare the authorization, it means he/she has fully understood the items and conditions mentioned above, and our company shall not be held the responsibility for such sequences as privacy disclosure, disputes, property and credit losses, etc. Our company reserves the right of final interpretation of this authorization clause, and has the right to terminate the service agreement with the authorized user immediately.

SCAN TO DOWNLOAD

This app PetU can be searched and downloaded on the GOOGLE PLAY as wel.

Product parameters

Product name: PetU Intelligent Dog Camera Treater
Product size: 132130256mm
Net weight : 1.1 kg
Barn reseives: 0.5L
Product materials: ABS
Camera: 165 HD night vision and wide angle camera
WiFi : 2.4G Only
APP installation requirement: Android 5.0 / I0S 7.0 or above
Power adapter: Input: 110-220V, 50760Hz, 0.4A
Output: 5.0V, l000mA

Technical specifications of the PetU intelligent dog camera treater

Set button

|

1. Quick press(shorter than ls)to manually pop treat
2. Under the configuration mode, the green lamp is flickering slowly (0.5s dark and 0.5s light) .
3. Under the configuration mode, in case there’s no food in the grain bucket, quick press(shorter than ls)and the red and green lamps shall flicker alternately.
4. Under the configuration mode or the network is connected, long press this button for more than 5s, reset and scan the Qr code after hearing the “beep” ; after hearing another prompt, the green lamp shall quick flickering at first, then normally on after the network is connected.

Red and green indicator lamp| Red lamp| Green lamp| Status description
OFF| Slow flickering| Configurable status
OFF| Quick flickering| Connecting to the network
OFF| Normally ON| The network is connected
Slow flickering| OFF| No food in the arain bucket, or the food is blocked

Press the button “ ” at the top right corner of Treater app interface to enter the” Setting” Interface, then set the relevant items .

Press the button “My” at the bottom right comer after exiting the Treater app Interface, then set the relevant items.

If you have any questions, please press the Service button and send your questions to us,we will reply by e-mail as soon as possible.

Product Description

SET Button: Short press to treat manually, hold for 5 seconds to resat connection, light will start to blink, ready to connect Wi-Fi indicator light; Flashing green means connecting, Solid green means connection successful.

Connection method: The best using range is the smart product close to WIFI launcher within 10 meters

Treater app surface
(Long press the button” Treat dispensing” for 5 seconds. )

App Connection

In case it’s impossible to scan the QR code for a long time due to the environments factors, you can enter the hotspot connecting mode and press the link under the QR code, Operation completed but no prompt tone was heard after entering the hotspot connecting interface, please follow the interface prompts and complete the connection

Enter the account password to log in. Click the “ ” in the upper right corner.
Go to the device selection page and select the device to be connected.

Long press the ” Set” button for 5 seconds, after hearing thevoice of “beep”,select the mark “O” and click the ” Next” button ” Input the WiFi account number and password which connected to the current phone ,this equipment can’t support the 5G network as present.

The scan distance is 10-20 cm. Using the device camera scan QR code.
The device will connect after you hear a ” beep ” sound.

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>