PowerA Enhanced Wired Controller for Xbox Series X-User Instructions

PowerA Enhanced Wired Controller for Xbox Series X

Specifications

• PRODUCT DIMENSIONS: 6.14 x 4.21 x 2.56 inches; 7.2 Ounces
• BINDING: Video Game
• ITEM WEIGHT: 7.2 ounces
• MANUFACTURER: PowerA
• LAYOUT: standard ergonomic
• USB CABLE LENGTH: 10ft (3m)
• COMPATIBILITY: Xbox series X/S

Introduction

It has Standard button layout with new share button on ergonomic video game controller. Dual rumble motors and mappable advanced gaming buttons are included in the Wired Controller. Back grip with diamond texture and front metallic d-pad. 3.5mm stereo headset jack with headset dial for game audio or chat mute.

This PowerA Enhanced Wired Controller is legally licensed for Xbox Series X|S or Xbox One, and it comes with additional functionality to improve your gaming experience. Check out the new Share button for in-game screen shots or video clips, or use the Headset Dial to easily change volume or mute just the chat channel in your wired stereo headset. Get a competitive edge by mapping two Advanced Gaming Buttons on the fly, and enjoy all of the features you expect, such as dual rumble motors, a standard ergonomic layout, a 3.5mm stereo headset port, and precision-tuned analogue sticks with anti-friction rings for smoother motion.

The metallic D-Pad and diamond-textured grip make this controller feel genuinely outstanding in terms of aesthetics and comfort. Our wired controller with a 10ft (3m) USB cable eliminates lag and allows you to play until you drop without worrying about running out of batteries.

PRODUCT OVERVIEW

CONTENTS

• PowerA Enhanced Wired Controller for Xbox
• Detachable 10ft USB Cable
• User Manual

SET UP

1. If Xbox is Off, connect the USB cable between available USB port on Xbox and Micro-USB port on controller. Press the Xbox Button on controller until console powers On. The small LED will illuminate to indicate connection successful.
2. If Xbox is On, connect the USB cable between available USB port on Xbox and Micro-USB port on controller. The small LED will illuminate to indicate connection successful.

NOTE: For player and controller assignment reference your official Xbox user’s manual.

ASSIGNING THE ADVANCED GAMING BUTTONS

1. Press the Program Button on the back of the controller. The LED Connection Indicator will flash, signaling the controller is in assign mode.
2. Press 1 of the following buttons (A/B/X/Y/LB/RB/ LT/RT/Left Stick Press/Right Stick Press/D-pad) to re- assign. Then press the Advanced Gaming Button (AGR or AGL) that you wish to assign. The LED connection indicator will stop flashing, signaling the Advanced Gaming Button has been set.
3. Repeat for the remaining Advanced Gaming Button. NOTE: Advanced Gaming Button assignments will remain in memory even after disconnected.

RESETTING THE ADVANCED GAMING BUTTONS:

1. Hold the Program Button down for 2 seconds. The LED Connection Indicator will slowly flash, signaling the controller is in assign mode.
2. Press the previously assigned button, and the function will be cleared.

USING THE SHARE BUTTON
Refer to Xbox documentation for details on functions and features related to the Share button.

USING THE HEADSET DIAL

Once you plug the 3.5mm jack from your headset into the controller, Dial will become active and LED will turn red to indicate chat is muted. Press down on dial to mute/unmute chat. To adjust volume, tap left or right to adjust step by step, or press and hold left or right to adjust volume to full up or full down.

NOTE: Audio controls within Xbox Settings will take first priority, followed by the the Headset dial, and finally any audio or mute controls on your headset. Refer to your Xbox and headset documentation for additional details.

TROUBLESHOOTING

For current FAQs, visitwww.PowerA.com/support

Q: Controller will not connect to Xbox console?

• A: Confirm your Xbox console is powered “ON”.
• A: Confirm your TV is set to the proper Video Channel and that you can see the Xbox console interface on your TV screen.
• A: Confirm cable is properly connected to your Xbox console.
• A: Confirm cable is properly connected to your PowerA Enhanced Wired Controller.

Q: Controller is connected but has no function?
A: Confirm you are using the Player #1 controller. For more troubleshooting refer to your Xbox console User Guide.

MOTION WARNING

Playing video games can make your muscles, joints, skin or eyes hurt. Follow these instructions to avoid problems such as tendinitis, carpal tunnel syndrome, skin irritation or eyestrain: • Avoid excessive play. Take a 10-to-15-minute break every hour, even if you don’t think you need it. Parents should monitor their children for appropriate play.

• If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel symptoms such as tingling, numbness, burning or stiffness, stop and rest for several hours before playing again.
• If you continue to have any of the above symptoms or other discomfort during or after play, stop playing and see a doctor.

**REGIONAL COMPLIANCE SYMBOLS**

More information available via web-search of each symbol name.

The WEEE symbol informs the end-user about separate disposal requirements for WEEE (Waste of electrical and electronic equipment) as required per the Article 11(2) of the WEEE Directive and prescribed by European standard EN50419:2005.

CE (Conformité Européene aka European Conformity) is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.

The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by One or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

CAN ICES-3(B)/NMB-3(B):

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device. ****

AUSTRALIAN WARRANTY STATEMENT:

This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes with a One-year warranty from date of purchase. Defects in the product must have appeared within One year from date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures. Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer.

FAQs

• Does the Xbox Series S support the PowerA controller?
  The PowerA Enhanced Wired Controller for Xbox Series X|S will take you to new heights. This Xbox-licensed gamepad is attractively designed and superbly manufactured, with performance-driving features.

• Is the PowerA Fusion Pro compatible with the Xbox Series S?
  The FUSION Pro wired Controller for Xbox One gives you a competitive advantage. This Officially Licensed Xbox Controller works with Xbox series X|S, with a mappable Pro Pack that allows you to assign button layouts on the fly, and four interchangeable paddles that maximize your gameplay.

• Are the PowerA Xbox controllers reliable?
  A reasonable pricing for a PC-compatible Xbox One controller. It fits comfortably in my hand and has a carbon-fiber-like shape on the rear that aids sweaty hand players. Although the sticks are significantly smaller than those found on Microsoft controllers, I enjoy the feel of them.

• Does the Xbox One Enhanced Wired Controller function properly?
  The PowerA Enhanced Wired Controller for Xbox One is designed with our most up-to-date ergonomics and is compatible with Xbox Series X|S. To improve your gaming experience, this officially approved Xbox controller has two mappable Advanced Gaming Buttons on the back, dual rumble motors, and a 3.5mm stereo headset jack.

• How can I connect my Xbox One S to my wired Xbox One controller?
  Plug the small end of any micro-USB cable into the slot on the back of the controller, and the USB plug into a port on the console. Turn on your console and wait a few moments until both the Xbox button on the controller and the Xbox button on the console flash solidly.

• **Is the Xbox controller fusion wireless?
  ** The PowerA Fusion Pro 2 Wired Controller is a wonderful choice for gaming on an Xbox or PC, with many of personalization options and some really intriguing features (like an useful volume dial at the centre of the controller). However, it is not wireless and its vibrations are louder.

• What is the definition of a magnetic impulse trigger?
  The Xbox controller contains “Impulse Triggers,” which contain independent rumble motors, if you weren’t aware (and not many people are). When firing a pistol or driving through difficult terrain, these triggers can vibrate to provide a more tactile sense.

• How can you connect an Enhanced Wired Controller to your computer?
  Connect the 9.8ft USB cable to any accessible USB port on your Xbox One console with your Xbox One console turned “ON.” Connect the other end to your PowerA Enhanced Wired Controller’s USB port. When your controller is connected, the LED Connection Indicator on the controller will light up.

• Are PowerA controllers long-lasting?
  The fact that the controller is so comfy, robust, and resistant even with that to the side is the proverbial icing on top. Simply told, it’s a wonderful alternative because it’s responsive, well-designed, and responsive.

• How can I attach a PowerA controller that is wired?
  Make sure your Nintendo Switch is turned on and connected to your television. Connect the USB cord to the Nintendo Switch Dock’s USB port. Connect the wired controller to the other end of the cord. Now you can utilize your wired controller.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>