comsol WCFS10 Folding Wireless Fast Charging Stand User Manual
- June 5, 2024
- comsol
Table of Contents
comsol WCFS10 Folding Wireless Fast Charging Stand
Qi Certified
Certification program ensures this charger has passed rigorous tests to
guarantee safety, compatibility and energy efficiency.
Compatibility
Compatible with Qi-enabled devices” including
- IPhone 11 Pro/11
- iPhone XS/XS Max/XR
- Samsung Note 10/9/8/5
- Sony Xperia XZ2
- iPhone X/8/8 Plus
- Samsung Galaxy Fold
- Huawei Mate 30/20 Pro
- LG V30+
- Samsung S10/S9/S8
- Google Pixel 3/3 XL
- Huawei P30 Pro
- LG G7 ThinQ
Features
- Two coils enable large wireless coverage to allow charging in portrait and landscape modes
- Supports 7.5W Apple wireless fast charging for iPhone 8 or later
- Supports 10W wireless fast charging for compatible devices such as Samsung Galaxy Series and more” Supports 5W standard wireless charging for all Qi enabled devices
- No need to remove your protective case. Works with most cases up to 3mm thick
- LED indicator to show charging status
- Smart IC enables energy saving mode when device is fully charged
- Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
- Includes 1.5m USB-A to USB-C charging cable (does not inlcude USB wall charger)
- Check with device manufacturer for Qi wireless compatibility
- When connected to a QC 2.0 or QC 3.0 wall charger (not inlcuded)
Wireless Charger Operation
- Connect the wireless charging stand to a USB wall charger (not included)
- The red LED will be on for 3 seconds to indicate the charging pad is powered on and in stand-by mode
- Place your wireless phone on the charging stand and your phone should start charging automatically
- The LED will fiash green to indicate charging
- if your phone does not not start charging, move your phone until the correct position is found and your phone starts charging
- When your phone is fuly charged, the Smart IC enables energy saving trickle charge mode
Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern.
Specifications
- Wireless Standard: WPC/Qi (v1.2.4)
- Quantity of Wireless Charging Coils: Two Coils
- Input: DC 5V 2A or 9V 1.67A
- Output: 5W/ 7.5W / 10W
- Working Frequency: 110 to 205KHz
- Charging Distance: 3 to 8mm
- Charging Efficiency: >72%
- Dimensions: 126 x 66 x 16.5mm
Important Safety Instructions
- Only use original or reputable third party chargers and cables
- Do not get wet to avoid causing short circuit damage and leakage
- Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
- Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
- Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
- Do not clean with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause damage to the charging stand.
iPhone is a trademark of Apple inc., registered in the U.S. and other countries. The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium. Android is a trademark of Google Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>