comsol PB10LC 10000mAh Power Bank Charger with Built-in iPhone Lightning Cable User Manual
- October 27, 2023
- comsol
Table of Contents
Model: PB10LC
10,000mAh Power Bank Charger with built-in
iPhone Lightning Cable & USB-C Cable
User Manual v1.1
Power Bank Layout
Features
- Battery type: Lithium-Polymer
- 10,000mAh provides 360% extra battery for a smartphone*
- Get an extra 25 hours of streaming video playback on an iPhone 12 or 20 hours on a Samsung Galaxy S20
- Built-in iPhone Lightning cable & Android USB-C cable for ultra convenience
- iPhone cable provides 18W of fast charge to charge your iPhone 8 or later from 0 to 50% in 30 minutes
- Four LED indicators to show remaining capacity
- Rechargeable more than 500 times
- Includes 20cm USB-A to USB-C cable to charge power bank
- Built-in over charging and short circuit protection
- Watt Hour Rating: 37Wh
- USB-C Input: DC 5V/3A
- Lightning Cable Output: 5V/3A 9V/2A
- USB-C Cable Output: DC 5V/3A
- Total Output: 33W
- Charging Time: Approx. 4 hours when using an 15W charger
- Size: 153mm (L) x 73mm (W) x 15mm (H)
- Weight: 225g
- Certifications: RCM, RoHS, UN38.3
Charging the Power Bank
- Using the included USB-A to USB-C cable, connect the larger USB-A connector to a USB wall charger
- Connect the smaller USB-C connector to the USB-C In port on the power bank
- During charging the LEDs will flash to show charging status
- When charging is complete all four LEDs will remain on
Charging an iPhone/iPad or Android Device
- Using either the built-in iPhone Lightning cable or built-in USB-C cable, connect your phone or device to the power bank
- When your phone or device is connected, charging should commence automatically
- If charging doesn’t start, press the Power On/Off button
- When your phone or device is fully charged, the power bank will automatically turn itself off
Checking Remaining Capacity
- Press On/Off button and the LEDs will show remaining capacity
- The LEDs will turn off automatically after approx. 5 seconds
| LED On / Off / Flashing | Remaining Capacity |
|---|---|
| Less than 5`)/0 | |
| 5% t o 25`)/0 | |
| 25% to 50`)/0 | |
| 50% to 75`)/0 | |
| 75% to 100% |
CAUTION
- Do not drop, misuse or apply excessive force to your power bank. Power banks contain batteries and a circuit board with fragile components that can be damaged if misused. If you drop or damage your power bank, discontinue use immediately.
- If crushed, punctured, exposed to fire or high temperatures or disassembled, batteries may catch fire, explode or cause burns.
- If your power bank swells or bulges, stop use immediately and dispose of the power bank in an appropriate manner. Continued use may cause the power bank to catch fire or explode.
- Do not charge the power bank and your device at the same time. It may cause the power bank to overheat.
- Store power bank in a cool and dry place. Do not store in hot or humid environments. Eg. In a car or directly in the sun.
- Power bank usage by children should be supervised.
- Do not put your power bank in a handbag, backpack or other bag where small metal objects can cause a short circuit.
- Do not dispose of power bank in heat or fire.
- All Comsol power banks have safety power cut off features to stop overcharging & overheating. However, we recommend disconnecting the power bank once it is fully charged and removing all cables.
- When charging a device, the power bank may feel warm, this is a normal operating condition & should not be cause for concern.
- In normal conditions, battery performance will decline over several years.
• Operating temperature should be between 0˚c to 45˚c.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>