comsol WCUV10 UV Steriliser with Wireless Charging User Manual
- October 27, 2023
- comsol
Table of Contents
comsol WCUV10 UV Steriliser with Wireless Charging User Manual
Compatibility
Compatible with Qi-enabled devices* including
- iPhone 12 Pro/Max
- iPhone 12/mini
- iPhone 11 Pro/11
- iPhone SE/XS/XS Max/XR
- iPhone X/8/8 Plus
- Samsung S20/S10/S9/S8
- Samsung Note 20/10/9
- Google Pixel 5/4/3
- Sony Xperia XZ3/XZ2
- Xiaomi Mi 10/v 9
- LG G8S/G7 ThinQ
- LG V30+/V40
Features
-
Certified by global leading certification company TUV SUD to kill up to 99.9% of harmful germs, viruses and bacteria
-
UV light is used to kill E.coli, Staphylococcus and Candida Albicans surface bacteria that live on your phone, keys, AirPods & jewellery
-
15 minutes is all it takes to complete the sterilisation process & sterilisation will stop automatically when the lid is open for safety
-
Supports 7.5W wireless fast charging for iPhone 8 or later#
-
Supports 10W wireless fast charging for compatible devices such as the Samsung Galaxy Series and more#
-
Supports 5W standard wireless charging for all Qi enabled devices
-
No need to remove your protective case. Works with most cases up to 3mm thick
-
LED indicator to show charging status
-
Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
-
Includes 1.5m USB-A to USB-C charging cable
-
Check with device manufacturer for Qi wireless compatibility
When connected to a QC 2.0 or 3.0 wall charger (not included)
Specifications
- Wireless Standard: WPC/Qi (v1.2.4)
- Input: DC 5V/2A 9V/2A
- Wireless Stand Output: 10W / 7.5W / 5W
- Working Frequency: 110 to 205KHz
- Charging Distance: 3 to 8mm
- Charging Efficiency: >70%
- Size: 214mm (L) x 120mm (W) x 34mm (H)
- Weight: 325g
- Certifications: RCM, RoHS, UN38.3
UV Steriliser Operation
- Using the included USB-A to USB-C cable, connect the UV Steriliser to a USB wall charger (USB wall charger not included)
- Remove the lid and place you phone, keys, jewellery or other items into the UV Steriliser
- Replace the lid and ensure it is on correctly
- Press the power button, the LED will be red and a 15 minute sterilisation cycle will begin
- When sterilisation is complete the LED will turn off and you can safely remove your items
- At any time during the sterilisation cycle, you can remove the lid and sanitising will automatically stop for safety
- You can sterilise items and charge your phone at the same time. During this process, the LED will be a lighter green
Wireless Charger Operation
- Place your Qi enabled wireless phone on the centre of the lid and your phone should start charging automatically
- The LED will be green to indicate wireless charging
- When your phone is fully charged, the Smart IC enables energy saving trickle charge mode
Important Safety Instructions
- Only use original or reputable third party chargers and cables
- Only use the product for the specified purpose of use
- Do not get wet to avoid causing short circuit damage and leakage
- Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
- Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
- Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
- Do not clean with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause damage to the charging dock
- Do not use the product if it is damaged or emits a suspicious odour
- Unplug the product from power sources when not in use
Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern.
iPhone is a trademark of Apple inc., registered in the U.S. and other countries. The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>