WISYCOM BFLR1 Portable RF Over Fiber Unit User Manual
- June 9, 2024
- WISYCOM
Table of Contents
BFL x1
SINGLE RF OVER FIBER MODULE
BFLR1 Portable RF Over Fiber Unit
BFLx1 is a single RF over Fiber module with selectable filters and high power Bluetooth long range.
RF over Fiber
| For a link without distance limits!
The fiber module allows to replace the coaxial cable and place the antennas
miles away.
---|---
Filter Bank
| 20 band pass filters and tunable filter 1MHz step software selectable to increase RF robustness.
Bluetooth 5 Long Rang
| Monitor & control through Bluetooth to adjust parameters in real time (Wisycom BT App)
OTHER FEATURES
- Wide RF band: 170-1260 MHz
- Antenna booster 12V, 150mA max
- 4mW (6dBm) optical TX power (for BFLT1)
- Operating voltage range: 6 ÷ 20 Vdc
- remote power supply from the RF connector (BFLR1)
- 2 RGB LEDs for RF overload and system status indication
- Easy configuration thru a High contrast OLED white display and 4 key navigation buttons
CONFIGURATIONS
RF CONNECTOR
| B | BNC female |
|---|---|
| N | N female |
(on request)
FILTER OPTION (only for BFLT1)
F1| Tunable filter: 470-758 MHz, 40MHz of BW
Selectable filter HP: 170/470/518/566/960MHz + LP: 608/698/1160/1260MHz
Fixed filter: 820 ÷ 832 MHz (EU), 733 ÷ 758 MHz (EU), 940 ÷ 960 MHz (USA)
---|---
F2| Tunable filter: 470-758 MHz, 40MHz of BW
Selectable filter HP: 170/470/518/566/614MHz + LP: 608/698/714/1260MHz
Fixed filter: 806 ÷ 810 MHz (JP), 927 ÷ 935 MHz (KR), 1240 ÷ 1260 MHz (JP)
OPTICAL CONNECTOR
| SC | SC/APC connector |
|---|---|
| ST | ST/APC connector |
| LC | LC/APC connector (on request) |
ACCESSORIES & RELATED
| Item: CDC34
External power feeding cable
CDC34: hirose 4pin Male/raw wires (50 cm)
CDC34HM: hirose 4pin Male/ hirose 4pin
Male (50 cm)
---|---
| Item: MRK980 with EXP2/EXP3
true diversity, ultra-wideband dual channel receiver
170-1260 MHz
| Item: PSP910-H
AC/DC Power Supply with Hirose 4 pin connector
PSP910-H: Europa plug type
PSP910-H-US: USA plug type
PSP910-H-UK: UK plug type
| Item: MRK16 with EXP3
19” 1U rack with 4 slots for MCR54
16 true div. wireless (4 x MCR54)Analog & digital output (Dante/AES3)
Ethernet & bluetooth controls
RF over fiber input (optional)
CONFIGURATION EXAMPLE
RECEPTION FIBER LINK (ANT mode)
Using 2 BFLT1 modules it is possible to receive the RF signal over fiber
coming from 2 diversity antennas installed in a remote area.
NOTE: MRK16/MRK980 has to be equipped with fiber expansion board
TRANSMISSION FIBER LINK (IFB mode)
Connecting MTK952 Master/Slave outputs to 2 BFLT1 linked over fiber to 2 BFLR1 modules it is possible to transmit 2 IEM signals to a remote area.
TECHNICAL SPECIFICATIONS
RF SPECIFICATIONS
| Frequency ranges | 170÷1260 MHz |
|---|---|
| RF Connector | BNC-F or N-F (on request) |
| Antenna booster (BFLT1) | +12Vdc, 150 mA max |
| DC power for external amplifier (BFLR1) | +12Vdc, 200 mA max (for PAW, |
LBP/LNP)
Tunable Filter| 470 ÷ 758 MHz (UHF), 40MHz of BW
Fixed Filter| F1 version: 820-832MHz, 733-758MHz, 940-960 MHz (for Europe, USA
and UK)
F2: version: 806-810MHz, 927-935MHz, 1240-1260MHz (for Japan and Korea)
RF to fiber link working modes| ANT (for reception link), IFB (for
transmission link)
Selectable band pass filter| 17 RF filters selectable:
---|---
F1 version| F2 version
HP| LP| HP| LP
170 MHz| 608/698/1160/1260 MHz| 170 MHz| 608/698/714/1260 MHz
470 MHz| 608/698/1160/1260 MHz| 470 MHz| 608/698/714/1260 MHz
518 MHz| 608/698/1160/1260 MHz| 518 MHz| 608/698/714/1260 MHz
566 MHz| 698/1160/1260 MHz| 566 MHz| 698/714/1260 MHz
960 MHz| 1160/1260 MHz| 614 MHz| 698/714/1260 MHz
OPTICAL
| Optical Connector | SC/APC or ST/APC or LC/APC (on request) |
|---|---|
| Optical power (BFLT1) | 6 dBm [4mW] |
| Wavelength (BFLT1) | 1550 nm |
| Input optical power range (BFLR1) | -6 dBm to 6 dBm [0.25mW to 4mW] |
| Wavelength (BFLR1) | 1300 to 1650 nm |
OTHERS
| Managing interface | Display menu and 4 buttons, Bluetooth 5 (Wisycom BT App) |
|---|---|
| LEDs | 2 multicolour RGB LEDs to easy indicates BFLx1 status |
LED1 status:
red: RF overload
blue: booster enabled
green: RF
LED2 status:
red: alarms
blue: Bluetooth enable
green: no alarm, no Bluetooth
Power supply| 9 ÷ 18 Vdc
Power Connector| Hirose 4pin (pin1: GND, pin4: Vdc)
Power consumption| BFLT1: 2 W (DC antenna booster OFF) – 3,5 W (DC antenna
booster ON)
BFLR1: 1,2 W (DC transmission amplifier OFF) – 3,5 W (DC transmission
amplifier ON)
Display| High contrast OLED white display (128 x 64 pixels)
Mounting| 4 holes (M4 screw type)
Temperature range| -10 ÷ +55 °C
Dimensions| 70,2 mm(L) x 127,1 mm(H) x 26,1 mm(D)
Wisycom Italy
Wisycom Srl – Via Tiepolo, 7/E I-35019 Tombolo (PD) Italy
Tel. +39 0424 382605 – e-mail
:sales@wisycom.com
Wisycom USA
Virginia 22304
Tel. +1888-947-9266 – e-mail :
sales@wisycomusa.com
BFLx1-en-b04 – Subject to change without notice
Documents / Resources
|
WISYCOM BFLR1 Portable RF Over Fiber
Unit
[pdf] User Manual
BFLR1, Portable RF Over Fiber Unit, RF Over Fiber Unit, Portable Fiber Unit,
Fiber Unit, Portable Fiber, Fiber
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>