comsol WCBH10 10W Wireless Fast Charging Bamboo Organiser User Manual
- October 27, 2023
- comsol
Table of Contents
Model: WCBH10
10W Wireless Fast Charging Bamboo Organiser
User Manual ver 1.3
Qi Certified
Certification program ensures this charger has passed rigorous tests to
guarantee safety, compatibility and energy efficiency.
Compatibility
Compatible with Qi-enabled devices* including
• iPhone 12 Pro/Max
• iPhone 12/mini
• iPhone 11 Pro/11
• iPhone SE/XS/XS Max/XR
• iPhone X/8/8 Plus
• Samsung S20/S10/S9/S8| • Samsung Note 20/10/9
• Google Pixel 5/4/3
• Sony Xperia XZ3/XZ2
• Xiaomi Mi 10/v 9
• LG G8S/G7 ThinQ
• LG V30+/V40
---|---
Features
- Supports 10W wireless fast charging for compatible devices such as the Samsung Galaxy Series and more#
- Supports 7.5W wireless fast charging for iPhone 8 or later#
- Supports 5W standard wireless charging for all Qi enabled devices
- No need to remove your protective case. Works with most cases up to 3mm thick
- LED indicator to show charging status
- Full safety protection for your devices with Qi certified temperature control, strict voltage regulation & short circuit protection
- Includes 1.5m micro USB cable to connect charging pad to USB wall charger (USB wall charger not included)
Specifications
- Wireless Standard: WPC/Qi (v1.2.4)
- Input: DC 5V/2A or 9V/1.67A
- Wireless Output: 10W / 7.5W / 5W
- Working Frequency: 110 to 205KHz
- Charging Distance: 3 to 8mm
- Charging Efficiency: >72%
- Size: 288mm (L) x 137mm (W) x 15mm (H)
Wireless Charger Operation
- Using the included micro USB cable, connect the wireless charging organiser to a USB wall charger (USB wall charger not included)
- It is recommended to use original or reputable 3rd party branded USB wall chargers. For faster charging times it is recommended to use a USB wall charger with a minimum of 2A output
- Place your Qi enabled wireless phone on the Comsol logo and your phone should start charging automatically
- If your phone does not start charging, move your phone until the correct position is found and your phone starts charging
- When your phone is fully charged, the Smart IC enables energy saving trickle charge mode
Please Note
To achieve 10W fast charging for Android devices or 7.5W fast charging for
Apple devices, the charging organiser needs to be connected to a Quick Charge
2.0/3.0 or USB-C PD wall charger (not included)
Important Safety Instructions
- Only use original or reputable third party chargers and cables
- Only use the product for the specified purpose of use
- Do not get wet to avoid causing short circuit damage and leakage
- Do not use in extreme hot, humid or corrosive environments to avoid short circuit damage and leakage
- Do not place too close to magnetic strip or chip ID card to avoid magnetic failure
- Do not place within 20cm of implantable medical devices (pacemaker, cochlear implant etc.) to avoid potential interference
- Do not clean with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause damage to the charging dock
- Do not use the product if it is damaged or emits a suspicious odour
- Unplug the product from power sources when not in use
Please Note: When wirelessly charging a device, the wireless charger and your device may feel warm. This is a normal operating condition and should not be cause for concern.
iPhone is a trademark of Apple inc., registered in the U.S. and other
countries.
The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium.
www.mycomsol.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>