comsol HDC650 Cat 6 HDMI Extender User Manual

October 27, 2023
comsol

Comsol HDC650 Cat 6 HDMI Extender

Package Contents

2x Micro USB Power Cable

Ports and Interfaces

  1.  Source: Connect the Sender to Input Source (Computer or Set Top Box) via HDMI connector
  2.  Display: Connect to the Receiver to Display via HDMI connector
  3.  DC 5V: Micro USB Power DC 5V. On the Sender, connect to the USB port on Input Source. Optional on the Receiver, only connect it the power from the Sender is not enough.
  4.  Reset: Reset on the Receiver only to equalize different cable lengths
  5.  CAT 6: Connect CAT 6 Cable from sender to receiver to extend HDMI signal

Connection Diagram

comsol-HDC650-Cat-6-HDMI-Extend

Introduction

Use the convenience of a single CAT 6 network cable to extend your HDMI signal up to 50m at Full HD 1080p. Ideal for extending your HDMI signal using an existing CAT 6 building cable. The reset function on the receiver automatically adjusts the signal to match the cable length for pe perfect picture performance.

Features

  • Supports Full HD 1920 x 1080 @60H, up to 50m using CAT 6 cable
  •  Supports Full HD 1920 x 1080 @60Hz up to 35m using CAT 5e cable
  •  Supports lossless uncompressed AV signal transmission
  • Compliant with HDMI v1 .3
  •  Supports 3D video format
  •  Supports compressed digital audio including Dolby True HD, DTS-HD Master Audio, Dolby Digital,
  • Dolby-AC3 and DTS
  •  No power is required at the display end – receive( is powered from the sender using the CAT 6 cable

Installation

  • Connect the sender unit to the HDMI connector of the computer, set-top box, or another source device
  •  Connect the receiver unit to the HDMI monitor or HDTV
  •  Using one of the included micro USB power cables, connect the small end to the DC 5V port on the sender unit and the large end to a USB port on the computer or set-top box. (If your set-top box does not have a USB port, then connect to a standard 5V USB phone charger)
  •  Power is not required for the receiver unit. It draws power from the transmitter via the Cat 6 cable
  •  Connect the Cat 6 cable to the sender unit and the receiver unit
  •  Turn on the computer or set-top box and monitor or HDTV
  •  You should have a pixel-perfect image on your monitor or HDTV

Specification

comsol-HDC650-Cat-6-HDMI-Extend

Troubleshooting

comsol-HDC650-Cat-6-HDMI-Extender-
fig-5

Dolby is a trademark of Dolby Laboratories
The Adopted Trademarks HDM HDMI Hih-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing and one All other trademarks, registered trademarks, or service marks are the property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals