WINTORY AIR True Wireless Earphone User Manual

: June 5, 2024
: WINTORY

Table of Contents

WINTORY AIR True Wireless Earphone
User Manual
Product Speciﬁcations
Product Information
How to pair?
How to charge?
Important safety information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WINTORY AIR True Wireless Earphone

User Manual

Thank you for choosing the WINTORY AIR True Wireless Earphone ! To better use this product, please read the Quick Start Guide carefully before use and properly manage it.

Product Speciﬁcations

Bluetooth version	5.0	Working distance	About 10M
earphones charging time	About 2h	Charging times	About 2h
Working time	About 6h	Standby time

(including the charging cradle)

Product Information

AIR True Wireless Earphone 1

How to pair?

Powering On

·When the earphone and charging case have power, open the cover of the charging cas and take out the earbuds, they will automatically turn on.
Or press the MFB button for 2 seconds to turn on when turned off, the blue indicator lights up for 1 second with ‘’power on” beep.

Powering Off

When the charging case have power, the earphones will automatically power off when placed them back into the charging case.
In power on state, press and hold the MFB button for 4 seconds to power off, the red light indicator lights up for 1 second with a “Power off ” beep.

Note:

If you take both earbuds out of the charging case, the right earbud will automatically connect with the left.
Reset the earphones if the earphones cannot connect with each other properly or cannot connect with your device properly.

How to Pair?(First Use)

When the charging case have power, open the cover and the earbuds will automatically power on. Taken out both earbuds, the left and right earphone will pair with each other automatically. A “Pairing” beep could be heared, and the red and blue lights flashed alternately.
Turn on the Bluetooth on the mobile phone, then search for the Bluetooth device “WINTORY AIR1’’and click connect. After the connection is successful, a “Connected”tone will sound.
To connected to new device
Make sure the charging case with power, take out both earbuds, press and hold the MFB button of each earbud for 2 seconds until the red and blue lights flash alternately and a “Pairing” tone be heard. Then use the new device to search for the Bluetooth device “WINTORY AIR1” and click to connect. A “Connected ” tone could be heard if the connection is successful.

How to resume binaural mode use?

Press and hold the left and right earphones MFB buttons simultaneously for 5 seconds to power off.
In the power off state, press and hold the left and right earphones MFB button simultaneously for 10 seconds, until the earphones emits a “beep” sound. then the left and right earphones will clear the pairing record, need reconnect and enter the binaural mode.

How to control？

Turn on the earphones: Make sure the charging case has electricity, then the earphones will automatically power on when taken them out of the charging case( in OFF state, press and hold the MFB button for 2 seconds to turn on).
Turn off the earphones: Make sure the charging case has electricity, the earphones will automatically power off when placed back into the charging case (or in the power -on state, press and hold the MFB button for 4 seconds to turn it off).
Play / Pause: Click the left or right earphone MFB button.
Answer /end call: Click the left or right earphone MFB button.
Reject Call: Long press 2 seconds for the left or right earphone MFB button.
Previous song / Next Song: Long press 2 seconds for the left earphone MFB button / Long press 2 seconds for the right earphone MFB button.
Volume + / Volume -: Double click the right / the left earphone MFB button.
Mobile Phone / Earphone Transfer: During a call, long press 2 seconds for the left or right button.
Clear Pairing Information: Hold down the MFB for 10s in power-off mode to clear pairing information, the red and blue lights flash twice then the blue light flashes quickly , the prompt sound ‘’beep beep beep’’. After clear the pairing record, connect “WINTORY AIR1″ to the phone again to return to normal.
Secure Pairing: When the mobile phone is connected to a Bluetooth device lower than Bluetooth version 3.0, a password is required, enter the default security code “0000″ to pair with your mobile phone.
Automatic Power -Off: If the left earphone is not connected to a phone, it will be automatically powered off in 5 minutes so as to save power. If the right earphone is not connected to the left earphone, the right earphone will be also automatically powered off in 5 minutes.
Reset: If the earphones cannot connect with each other properly or cannot connect with your device properly, need to reset the earbuds, put the earbuds back into the charging case to reset.
Activate / Inactivate voice assistant: Click 3 times in a row for the left or right MFB button to activate/inactivate voice assistant.

How to charge?

Charge the Charging Case: Please use a low power charger below 5V-2.1A to charge. The white charging LED indicators flash during charging. The number of flashing indicators varies with the battery level. All indicators turn solid white when the case is fully charged (a full charge takes about 2 hours).
Charging the Earphones: Put both earbuds into the charging case. The red indicator on both earphones will be on. When the earbuds fully charged, the indicator will be off. A full charge takes about 2 hours. A fully-charged charging case can provide 3 times cycles of a full charge power for the earbuds.
Low Battery Level Indication: If the battery level of the charging case is low, the low-battery indicator on the charging case will show only one grid (25% left), reminding you to charge. When the battery level of the earbuds is low, the Bluetooth indicator on the earphones will turn red and a low-battery beep “Please charge”sound can be heard.

Important safety information

Caution: If you do not intend to use the headphones for a long time, charge the earphones once every 20 to 30 days to ensure its expected service life.
Don’t remove or replace the battery, including sensitive electronic components, and can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don’t use damaged batteries and electronic components.
Disposal and recycling information: Don’t treat the product and battery as a household waste or put into a fire. When you
decide to dispose of the product and its battery, please follow the local environmental laws to avoid explosion or pollution.
Medical device interference: The product contains components and radios that emit electromagnetic fields and also contains magnets. These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of
separation between your medical device and product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.
Please fully charge the battery before use. Please use a low-power charger below 5V 2.1A, otherwise damage may be caused.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

www.wintory.net