WINTORY W1 Wireless Headset Instructions

WINTORY W1 Wireless Headset
Instructions

Product specifications:

Cable/Line In Connection Cable
Charging Time| About 4.5 Hours

1. Built-In Mic
2. Mic Jack
3. Line In Interface
4. Indicator Light
5. Type-C Charging Port
6. Volume -/Previous Track
7. Power ON/OFF/Stop
8. Volume ＋/Next Track
9. Toggle Button For 7.1 3D Stereo Sound

Buttons functions

Power
PP/HSF| Power Off| Long Press| Press and hold for 3 seconds, power off.
Power ON and Search| Long Press| Press and hold for 3 seconds, Power on and enter searching/reconnection mode.
Play/pause| Short press| While listening to music, short press once to pause. Short press again to play.
End a call| Short press| While calling, short press once to end the call
Reject a call| Long press| Long press to reject the in-come call.
Switch| Double press| During search ro ing, double UAE press shortly to switch prompt language.
Redial last number| Double press| Double press shortly to redial last number.
Answer a call| Short press| Short press once to answer a phone call.
Volume+| Increase the volume| Long press| Long press to increase the volume. There is a prompt when the volume reaches the Maximum.
Next song| Short Press| During music playing, short press to skip to the next song.
Volume-| Decrease the volume| Long press| Long press to decrease the volume.
Previous song| Short Press| During music playing, short press to skip to the previous song.
LED/3D| LED light switch| Hold for 2 seconds| LED ON / OFF
---|---|---|---
3D sound switch| Short press| Switch music mode / low latency simulate 7.1 channel 3D sound mode.
MIC ON/OFF| Short press twice| Short press twice to switch MIC on or OFF. (Open MIC or Mute)

Manual: LED indication

Bluetooth
disconnected| Red light and blue
light flash alternatively| Red light and blue light flash alternatively| Disconnect
In-come call| Once per 5 seconds| | “zero-nine”
Talking| Once per 5 seconds| |
Paired| Once per 5 seconds| | Connection
Playing| Once per 5 seconds| |
Low Voltage| Once per 200ms
seconds| | Battery Low
Charging| The blue light was on once fully charged.| The red light is on during charging. And turn off once fully charged.|

How to use

The headset is with built-in 1000mAh rechargeable battery. Do not use the headset while charging. Insert DC charging and reset system Cut-off charging current: 10mA
Power on and off
To switch on the headset: in the power-off mode, long press MFB 3 seconds. Blue light on for 1 second and a prompt “Power On”.
To switch off the headset: while the headset is on, long press MFB 3 seconds. Red light on for 1 second and there is a prompt “Power Off”.
Pairing
Before using it the first time, it’s needed to pair the headset and mobile which support Bluetooth connection.
Better to keep the distance of the headset and mobile phone at 1m.
Make sure the headset is in the power-off mode.
Long press MFB for 3 seconds till red and blue lights flash alternatively.
Now it’s in pairing mode.
Open the Bluetooth function of the mobile phone and it will search the headset automatically.
(Check the manual of mobile phones to know how to open Bluetooth function. )
Once the mobile finds the name of the headset “W1”, click it to connect the headset. There is a prompt of “connection” from the headset to indicate pairing successfully. The headset enters standby mode and the LED light flashes slowly.
Note:

1. If the headset enters connection mode but cannot pair successfully in 5 minutes, the headset will have a prompt “Power off” and turn off.
2. Make sure the headset and mobile are within a distance of 10m and with no barrier so that you can use the music player in your mobile phone to listen to the music and can use your headset to make phone calls.

Connection ：

• The headset will automatically connect with the device which is previously connected with the headset if the device is powered on and within connecting range.
• In standby mode and pressing the “MFB” button, the headset will connect to the device which connected the headset the last time.
• To operate the mobile to connect the headset, please find and click the ID number “W1” (the model name of the headset) to connect the headset.

Disconnection ：

• To disconnect the headset, please do this ：
• Close the Bluetooth function of mobile ；
• Or turn off the headset.

Note, once the headset disconnects the mobile phone, it will turn off automatically in 5 minutes. To play music on your mobile phone:
Make sure your headset connects the A2DP (Advanced Audio
Distribution Profile) mode of your mobile phone. Then your headset can remotely control the music player of your mobile phone through QVRCP (The Audio/Video Remote Control Profile) service

1. Answer phone calls while playing music ：
   • If a phone call comes while listening to music, the music player of the mobile phone will pause automatically and play the sound of the ring tone. Please short press the “MFB” to answer the phone call. The music player of the mobile phone will continue to play music once the phone call ends. You may need to press “MFB” or operate the mobile phone to resume playing music. (It depends on the features of the mobile phones.)

2. Play and pause music.
   • While playing music, please short press “MFB” to pause the music and press “MFB” again to resume playing music.

3. Adjust volume.
   • While playing music, long press “V+” button to increase the volume. Please long press “V-” button to decrease the volume.

4. Switch songs
   •  While playing music, please short press “V+” button to switch to the next song or short press “V-” button to switch to the previous song.

Low voltage detection.

The headset will indicate with prompt “Battery Low” when the voltage is lower than 3.2V and will turn off when the voltage is lower than 3.0V.

• Attention: please recharge the battery once hearing the “Battery Low” prompt so as not to shorten the life of the battery.

USB charging.

• Plugin DC5V±0.25 /1A charger. The red light on indicating charging status.
• Once fully charged, the red light turns off and the blue light on.

Bluetooth certification：

• Bluetooth technology conforms to the international standards

AUX IN

• Plugin 3.5mm audio cable to use it as a wired headset. Once the 3.5mm audio cable is plugged in, the Bluetooth will turn off automatically, and promptly indicates “Power Off”.

Low latency & simulate 7.1 channels 3D surround mode.

• Please double click “MFB” to get into low latency gaming mode. This mode opens the 3D surround and simulates the 7.1 channels effect. Low latency can be up to 53ms.

Anomalies solutions

1. The mobile phone can’t search the Bluetooth headset?
   A) Confirm if Bluetooth headset is power on or off (if power on, blue and red indicator light flash alternately)
   B) lf it is powered on and still can’t search, please reboot Bluetooth and mobile phone.

2. After connecting the Bluetooth headset and mobile phone, does disconnection or noise occur?
   A)Bluetooth power is low, you need to charge the Bluetooth headset as soon as possible;
   B)There is an obstruction between the phone and the Bluetooth or the distance exceeds the signal reception distance, please do not put your hand on the Bluetooth. And in order to maintain the continuous stability of the signal, please try to keep the Bluetooth and mobile phone in the same direction.

3. Whether other Bluetooth phone users may hear my conversation?
   When pairing the headset with a Bluetooth mobile phone, the dedicated linking route will be created for these two Bluetooth devices only. According to the Bluetooth technology used for headsets, it is not easy for third parties to monitor the conversations, and the RF power of Bluetooth wireless signals is far less than that of normal mobile phones, so these signals are difficult to be detected by third parties.

4. What happens when the distance between the mobile phone and Bluetooth headset exceeds the effective distance?
   When the distance between mobile phone and Bluetooth headset exceeds the effective distance, the connection between mobile phone and Bluetooth headset will be broken automatically. When it comes back in the effective distance， mobile phone and Bluetooth headset will be connected automatically without any setting. But some phones do not support this function, and the Bluetooth device should be searched in the design list and then connect.

Material particulars

1. In order to avoid damage to your hearing, please limit the time using the headset at high volume, and set the volume at a safe level. The higher the volume is, the shorter of safe listening time;

2. if you are in potentially hazardous sites, please stop using the headset to prevent damage or malfunction;

3. Please do not expose the headset in high-temperature places, such as in the vicinity of heating facilities or in the car exposed to direct sunlight;

4. Please do not immerse the headset in water;

5. Please do not use any alcoholic ammonia for cleaning. If necessary, please use a soft cloth to dean it;

6. Do not store the headset where the temperature is below-15 degrees or above 35 degrees.
   The battery life may be shortened at low temperatures;

7. Please use the specified USB charging device.(Charging voltage DC5±0.25V)

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>