WINTORY AIR 2 True Wireless Earphone User Manual

WINTORY AIR 2 True Wireless Earphone User Manual

User Manual

Thank you for choosing the WINTORY AIR 2 True Wireless Earphone ! To better use this product, please read the Quick Start Guide carefully before use and properly manage it.

Please carefully read this manual before use ( Please save it)

Binaural usage (Recommended):

Take out the left and right earphone at the same time, then open the Bluetooth function of mobile phone and search for “WINTORY AIR 2-R” for pairing.

Single right earbud usage (R main earphone) (recommended):

Take out the right earphone (R main earphone) separately, then open the mobile phone Bluetooth and search for “WINTORY AIR 2-R” for pairing. When using the right earphone alone, turn on the left earphone, and the left and right earphones will automatically connect to enter the binaural mode.

Single left earbud usage (L secondary earphone) (Not recommended):

Take out the left earphone separately, then open the mobile phone Bluetooth and search for “WINTORY AIR 2-L” pairing.

* Note: If you take the single left earbud mode:

The left ear cannot be connected to the right ear, even if you put the two earphones back in the charging case and then remove them all at the same time, only the left ear will sound. So the device needs to be reset.

How to resume binaural mode use?

1. Press and hold the MFB buttons of left and right earphones simultaneously for 5 seconds to power off.
2. In the power off state, press and hold the MFB button of left and right earbuds simultaneously for 10 seconds until a “beep” sound which means the pairing records are clean.
3. Need to reconnect for binaural mode. Turn on Bluetooth , search for “WINTORY AIR 2-R” and connect.

Product Specifications

Product Information

How to pair?

Powering On

• When the earphone and charging case have power, open the cover of the charging case and take out the earbuds, they will automatically turn on.
• Or press the MFB button for 1 seconds to turn on when turned off, the blue indicator lights up for 1 second with ‘’power on” beep.

Powering Off

• When the charging case have power, the earphones will automatically power off when placed them back into the charging case.
• In power on state, press and hold the MFB button for 4 seconds to power off, the red light indicator lights up for 1 second with a ”Power off ” beep.

Note :

1. If you take both earbuds out of the charging case, the right earbud will automatically connect with the left.
2. Using one earbud mode may result in poor pairing of the left and right earphone. You need to clear the pairing record of both earbuds at the same time and reconnect to enter binaural mode.
3. Reset the earphones if the earphones cannot connect with each other properly or cannot connect with your device properly.

How to pair? ( first use )

• When the charging case have power, open the cover and the earbuds will automatically power on. Taken out both earbuds, the left and right earphone will pair with each other automatically. A “Pairing” beep could be heard, and the red and
  blue lights flashed alternately.

• Turn on the Bluetooth function of the mobile, then search for device “WINTORY AIR 2-R” and click to connect. After the connection is successful, there is a beep ” Connected”.

If put the right earbud back into the charging case, and close the cover. The left earbud will automatically enter matching mode. So you need to reopen the Bluetooth of the phone, and search for device “WINTORY AIR 2-L”, click to Connect, after the connection is successful, a beep “Connected” could be heard, this is monaural mode of left earbud. Then take out the right earbud, the headphones will enter into binaural mode again.

(Note: Before use the monaural mode of the left earphone, you must connect the right earphone “WINTORY AIR 2-R” at first, otherwise the left and right earbuds can’t connect with each other normally, so you need to clear the pairing record, and then connect “WINTORY AIR 2- R” to restore)

How to resume binaural mode use?

1. Press and hold the left and right earphones MFB buttons simultaneously for 5 seconds to power off.
2. In the power off state, press and hold the left and right earphones MFB button simultaneously for 10 seconds, until the earphones emits a “beep” sound. Then the pairing record of left and right earphones be clear , need reconnect to enter binaural mode.
3. Turn on Bluetooth of your device again, search for “WINTORY AIR 2-R” and connect to complete pairing.

How to control？

• Turn on the earphones: Make sure the charging case has electricity, then the earphones will automatically power on when taken them out of the charging case ( in OFF state, press and hold the MFB button for 1 seconds to turn on).
• Turn off the earphones: Make sure the charging case has electricity, the earphones will automatically power off when placed back into the charging case (or in the power-on state, press and hold the MFB button for 4 seconds to turn it off).
• Play / Pause: Click the left or right earphone MFB button.
• Answer / end call: Click the left or right earphone MFB button.
• Reject call: Double-click on the left or right earphone MFB button.
• Previous song / Next song: Double-click on the left earphone MFB button/ Double
  -click on the right earphone MFB button.
• Mobile phone / earphone mode transfer: During a call, double-click the left or right button.
• Clear pairing information: Hold the MFB for 10s in power-off mode to clear pairing information, the red and blue lights flash twice then the blue light flashes quickly , the prompt sound ‘’beep beep beep’’. After clear the pairing record, connect “WINTORY AIR 2-R” to the phone again to return to normal.
• Secure pairing: A password is required to connect to a Bluetooth device lower than Bluetooth version 3.0, enter the default security code “0000” to pair.
• Automatic power-off: If the left earphone is not connected to a device, it will be automatically powered off in 5 minutes to save power. If the right earphone is not connected to the left earphone, the right earphone will be also automatically powered off in 5 minutes.
• Reset: If the earphones cannot connect with each other properly or cannot connect with your device properly, need to reset the earbuds, put the earbuds back into the charging case to reset.
• Activate/Inactivate voice assistant: Long press the left /right MFB button for 2 seconds.

How to charge?

• Charge the charging case
  Please use a low power charger below 5V-2.1A to charge. The white charging LED indicators flash during charging. The number of flashing indicators varies with the battery level. All indicators turn solid white when the case is fully charged (a full charge takes about 2 hours).

• Charging the earphones
  Put both earbuds into the charging case. The red indicator on both earphones will be on. When the earbuds fully charged, the indicator will be off. A full charge takes about 2 hours. A fully-charged charging case can provide 3 times cycles of a full charge power for the earbuds.

• Low battery level indication
  If the battery level of the charging case is low, the low-battery indicator on the charging case will show only one grid (25% left), reminding you to charge. When the battery level of the earbuds is low, the Bluetooth indicator on the earphones will turn red and a low-battery beep “Please charge” sound can be heard.

Important safety information

• Caution: If you do not intend to use the headphones for a long time, charge the earphones once every 20 to 30 days to ensure its expected service life.

• Don’t remove or replace the battery, including sensitive electronic components, and can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don’t use damaged batteries and electronic components.

• Disposal and recycling information
  Don’t treat the product and battery as a household waste or put into a fire. When you decide to dispose of the product and its battery, please follow the local environmental laws to avoid explosion or pollution.

• Medical device interference
  The product contains components and radios that emit electromagnetic fields and also contains magnets. These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.

• Please fully charge the battery before use. Please use a low-power charger below 5V-2.1A, otherwise damage may be caused.

NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

www.wintory.net

References

• The Expert of True Wireless Audio – Wintory

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>